You are reading the article A Roundup Of Windows 10 Anniversary Update Problems And Solutions updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 A Roundup Of Windows 10 Anniversary Update Problems And Solutions
Though the Anniversary update installed without any hiccups for many Windows 10 users (I’m one of them), it is still not perfect. There are many instances where you might face problems or errors while installing the Anniversary update. The following are some of the common problems you might face and how to solve them.
This is one of the common errors that one might face while downloading or installing the Anniversary update. As you can tell from the error description, this error is caused when your Windows system is unable to connect to the Windows update servers.
To solve this error check if your system is behind a VPN. If you are using a VPN, then deactivate it and try again. Also, check if your ISP is blocking certain IP addresses which in turn is causing this error.
If there are no network issues, and you are still seeing this error, that means your System Reserved partition is smaller than the required size. Usually, the System Reserved partition will be around 100 to 200 MB. To increase the partition size, you can use any free third-party partition management software.
Note: before resizing, it is strongly recommended that you have a good backup of all your data, just in case.
Reduce the size of your C drive by 200 or 300 MB using the slider. This action will create unallocated space.
After resizing, try to install the update. It should work now.Error: 0x80200056 (Accidental Restart While Installing the Update)
The Error: 0x80200056 will pop up when there is an accidental restart or sign-out during the Anniversary update installation procedure. Though this may seem intimidating, it is nothing major. Just restart your system and try to install the update again. Of course, don’t restart or power off your Windows system while the update is in process – it may damage your system files and other data.Error: Failure to Complete Anniversary Update Installation – Undoing Changes
This error is common when you are trying to update old laptops or notebooks. Though there is no official solution available, many users reported that powering off, unplugging the power cord and then removing the battery for a few minutes solved the problem, so do try it.Error: Something Happened Error: 0x800F0923 (Software Compatibility or Driver Issues)
This is a painful error for some Windows users as this error is caused due to hardware drivers or incompatible software. Though you can easily uninstall the incompatible software, it can be hard to find the driver that is causing the issues.
To pinpoint the issue it is recommended that you use the Media Creation Tool. This tool will list all the drivers and software that are incompatible with the update. Once you find the incompatible driver or software, try to download the update from the manufacturer site or just uninstall them. In case of drive issues, you can uninstall or update the driver from the Device Manager.
Once you are done updating or uninstalling the software or driver, try to re-initiate the update procedure using the Media Creation Tool.Error: 0x80073712 (Damaged or Missing Installation Files)
This error is caused when the update or installation files are damaged or missing. To resolve the issue clear the Windows update cache or redownload the update using the Media Creation tool. Alternatively, download the Windows 10 Anniversary Update ISO, and create a bootable media so that you can install the update from the DVD or USB.
Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
You're reading A Roundup Of Windows 10 Anniversary Update Problems And Solutions
Fix: Lumia won’t download Windows 10 Mobile Anniversary Update
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
readers this month.
The Anniversary Update for Windows 10 Mobile is finally here, after the PC versions was released. However, not everyone is able to grab the update immediately, mostly because Microsoft decided to release it gradually, but also because of various installation errors.
So, if you actually received the update, but are unable to download on your Lumia phone it for some reason, we’re going to show you a few solutions for your problemSolution 1 – Plug in your device
Windows 10 Mobile is programmed to to make sure that once you start downloading a new update, nothing interrupts it. Therefore, if you don’t have enough battery to download and install the whole update, your device simply won’t let you download it.
So, the solution for this is pretty obvious, you just need to plug in your phone to a charger, and try to download the update once again. If you’re still not able to download the Anniversary Update, even though your phone is plugged in, or your battery is full, try some of the solutions listed below.Solution 2 – Make sure you’re connected to WiFi
Similarly to the previous case, you’re phone probably won’t let you download the Anniversary Update, or any other update for Windows 10 Mobile if you’re using data connection. Windows 10 Mobile does this to prevent huge data charges, because updates like the Anniversary Update are quite big, and they can eat a lot of data, and even cause some additional charges if not connected to WiFi.
If you see that your is not connected to a WiFi network, try connecting it, and see if you’re now able to download the Anniversary Update. If you still can’t download it, try some of the other solutions from this article.Solution 3 – Make sure you have enough space
Just like we mentioned above, the Anniversary Update is quite big for mobile standards, and it can take up to… So, if you don’t have enough free space, you obviously won’t be able to download the second major update for Windows 10 Mobile.
You have two choices in case you don’t have enough space on your device. You either can delete some apps or other data, and free up some space for the update, or get a bigger memory card, and transfer your apps and data to it. It’s completely up to you.Solution 4 – Soft reset
To perform a soft reset on your Windows 10 Mobile device, press Power Off + Volume Down button at the same time, until your phone restarts. After your device restarts wait for it to start again, and for everything to go back to normal. Once your performed a soft reset, try downloading the Anniversary Update once again, and it might work this time. If performing the soft reset didn’t help solving the problem with downloading the Anniversary Update, prepare for some more serious actions.Solution 5 – Hard reset
If none of the solutions above helped you download the Anniversary Update on your Lumia phone, you can try with the most serious solution – a hard reset. As its name says, hard reset brings your Lumia to factory settings, and deletes all installed apps and media.
Once you perform a hard reset, try downloading the Anniversary Update once again, and hopefully you’ll be successful.
But remember, it is highly recommended to do a backup of your data, so you don’t loose everything after resetting your phone. If you don’t know how to do a backup of your data and media, follow these instructions:
Tap on More options
And then, go to Back up now
Once you backed up all your stuff, you can perform a hard reset without fearing that you’ll loose all your data. To perform a hard reset in Windows 10 Mobile, do the following:
Now, tap on Rest your phone
Wait for the process to finish
Once you perform a hard reset, and your phone gets back to work, head over to Windows Update, and try to download the Anniversary Update. Hopefully, you’ll be successful this time.
RELATED STORIES YOU NEED TO CHECK OUT:
Was this page helpful?
Start a conversation
FIX: Eudora problems on Windows 10/11
If Eudora is your preferred email client, it’s very likely to experience problems when using it on Windows 10.
In this article, we’re guiding you through the necessary steps to restore Eudora’s functionality.
Don’t hesitate to take a look at our Web & Cloud section and be prepared to master your apps.
Since you’re here, visit our exhaustive collection of articles in the Software Hub.
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
readers this month.
Email clients were popular in the past, but as the Internet develops, many users switched to webmail services since they are more practical.
Eudora used to be a popular email client for macOS and Windows alike. It was launched in 1988 and later acquired by Qualcomm in 1991.
The last commercial version of Eudora was released in 2006. Following several attempts to keep it alive, an open-source version of the client was abandoned in 2010.
Even though Eudora is now an outdated email client, some users don’t want to switch, and they continue using it on Windows 10.
Since the email client hasn’t been updated in years, some issues with Windows 10 are expected, and today we’re going to show you how to fix them.How can I fix Eudora problems on Windows? 1. Install Eudora to the root directory
Most Windows applications will be installed by default in C:Program Files directory. But it doesn’t work for Eudora.
So if you want to avoid any problems with this email client, we suggest that you install Eudora on a root directory.
So during installation, be sure to change the directory from C:Program Files to C:Eudora and send the application there.
After doing that, most problems with it will be resolved.2. Try an alternative email client
We insist on switching to a more modern and reliable email client that’s compatible with your OS. You have a multitude of options, but we recommend you get an email client with integrated productivity features.
Modern email clients can help you open all your emails from all your providers in just one Window. They come with very good search options that help you find emails by using keywords.
Some of them include optical character recognition technologies that allow you to search for images as well. On top of that, you can create a good management system with filtering, tagging, and folders.
Up-to-date email clients will most likely give you fewer issues than Eudora. Not only will you be able to open and manage your emails, but upgraded software have greater security that protects against present-day threats.3. Move Eudora files and change your registry
First, go to C:Program FilesQualcommEudora
Copy all files from this directory to the following location: C:UsersYour_userAppDataRoamingQualcommEudora
Then, do the following:
After moving the Eudora files and changing the registry, check if the problem is resolved.4. Make sure that your browser is set as default
After making the necessary changes, you should be able to open links in Eudora without any problems.
If the issue still persists, you might have to manually copy and open the links as a workaround.5. Uncheck the Use Microsoft viewer option
If you have any problems with opening links in Eudora, you might want to try disabling the Use Microsoft viewer option.
To access this option, navigate to Settings / Viewing mail. Simply disable this option and the links will start working.
Then, enable the Use Microsoft viewer option again, and the issue should be resolved completely.6. Don’t set Eudora as the default email client
Users reported the following message on their Windows 10 PC after installing Office 365:
Eudora is unable to update the system registry
To fix this problem:
Eudora was a great email client in the 90s, and even though this program works on Windows 10, there are certain issues that can appear, but you can easily solve them by using one of our solutions.
If you don’t manage to solve the problem, you might want to consider switching to a different email client, as suggested in the beginning.
Was this page helpful?
Windows 10 KB3194496 fails to install, causes proxy problems and more
Microsoft recently released a new cumulative update for Windows 10 version 1607. KB3194496 is just a regular update that brings some system improvements and bug fixes, but no new features.
However, cumulative update KB3194496 is also bringing issues of its own. In this article, we’re going to list all the KB3194496 issues reported by Windows 10 users, and we’ll try to find a way to solve at least some of them.Windows 10 KB3194496 reported issues
The most widespread problem, and the issue most users are reporting, concerns, of course, installation problems. Microsoft Community forums are currently flooded with complaints, as many users are reporting various problems that prevent them from installing the update.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Cumulative Update for Windows 10 Version 1607 for x-6-based Systems (KB3194496)
This surely is a very annoying problem, as it can completely block Windows Update, leaving users unable to download the cumulative update normally. However, there are a few actions that users can perform to install KB3194496 on their computers.
Users can manually reset Windows Update, use a third-party program to download updates, but perhaps the best solution in this case is to manually download and install the update.
Another issue when installing cumulative update KB3194496 concerns keyboard functionality. Namely, the problem occurs on the first boot after the update is installed. Windows 10 asks users to choose a keyboard layout, but the keyboard remains unresponsive.
So I have a friend who just finished installing the KB3194496 cumulative update for windows 10 a few hours ago. Window’s did it’s typical “Installing X%” and rebooted, but when it rebooted it was trying to do an automatic system repair. It then cuts immediately to a blue screen telling him to choose a keyboard layout, but he can’t use the mouse and the keyboard buttons don’t respond.
And finally, another user reported Chrome and Firefox proxy authentication issues that, according to him, have been affecting the last three cumulative updates, including KB3194496:
Other people on the forum remained silent when it came to solving the problem, but one user actually explained what’s causing it:
I’m experiencing the same issue with a company proxy McAfee Web Gateway and a Windows 10 client, after the abovementioned update. I’ve traced the connection and discovered that the problem is related to Google Chrome not completing the 3-way handshake of NTLM authentication (in particular, step 3)
The issue is very weird considering that, from a comparison between MS Edge and Chrome, step 1 and 2 are the same. Then Edge completes the procedure with the authentication message (step 3) and Chrome stops the sequence returning to the user ERR_INVALID_AUTH_CREDENTIALS. It looks like there is something in the KB code that breaks the NTLM authentication.
Windows 10 users also report that KB3194496 kills the Ethernet connection. The OS usually displays the error message “Ethernet Doesn’t Have A Valid IP Configuration”, and none of the workarounds available on the almighty Internet really work. Thank you, Selatious for the tip.
KB3194496 killed my Ethernet connection. The odd thin when it first happened I had outlook and working but no browsers. Did a Win diagnostic fix and lost complete connectivity. Was running off the router so connected directly to the modem with no luck. Win informed me that ‘Ethernet Doesn’t Have A Valid IP Configuration’ I worked on every possible solution for a solid day with no luck. […]
Using a friend’s wireless laptop, I hunted for solutions online, none of which solved the my Ethernet connection. None worked. As a last resort before I went out a purchased a WiFi card or dongle, I did a system restore to before the KB3194496 cumulative update.
That’s all for our article about the KB3194496 issues in Windows 10. This update is far less troublesome than the latest Windows 10 build, but that’s normal, since cumulative updates are stable releases, or at least they should be.
RELATED STORIES YOU NEED TO CHECK OUT:
Was this page helpful?
You might encounter a situation where video streaming won’t work properly. For example, on YouTube, the full screen won’t work, or the video might get stuck, or there might be only sound but no picture. In this article, I’ll suggest a few tips to resolve such issues.Video streaming and buffering problems in Windows 11/10
If you face problems playing video content on your Windows 11/10/8/7 PC, try these suggestions; one of them is sure to help you:
Update Video Drivers
Update Video player software
Disable Adaptive brightness
Change buffer settings in Windows Media Player
Disable Hardware acceleration
Clear browser cache
Reset the browser.
Let us see these in detail.
Ensure that you have the latest display drivers installed. Sometime outdated display drivers can misbehave. So go to the appropriate manufacturer’s website and find your display card model and download the latest drivers for it.
For instance, if you have ATI Radeon, go to ATI’s website and search for the model and download it. Sometime you won’t find the correct drive on the manufacturer’s website if it’s a Notebook. So go to the Notebook manufacturer’s website and download it from there.
Update your Abode Flash player, Quick Time player, DivX Web Players, etc., as the case may be. These are the common software used for streaming videos. If one of this software is corrupted or out-of-date, then you might experience issues in streaming videos. So visit each manufacturer’s website and look for the new version and download it. Make sure you remove the old version and download the appropriate application for you.3] Disable Adaptive brightness
Disable Adaptive brightness and see if that helps.4] Change buffer settings in Windows Media Player
Open Windows Media Player.
Go to Network Buffering.
Change the Buffer value from 5 to 10.5] Disable Hardware acceleration
I have seen many times that Flash videos, face rendering issues with Hardware Acceleration. In such a case, I recommend you disable Hardware Acceleration and then restart the browser to see if it helps.
To disable the Hardware acceleration, follow these steps.
Make sure that the “Enable Hardware acceleration” box is unchecked.
Clear the cache, cookies and Temp files. Sometimes these files can mess up the proper working of a browser. The best and easiest way of doing this is using a small application called CCleaner. This program will help you in clearing the cache, cookies, temps files, etc.
Once all the cache, cookies, and temp files are cleared, then open the browser and try again.
As a last resort, you could reset the browser to default settings, reset Winsock, reset the LSP, and flush the DNS. to make sure everything is working fine.
If you know of any additional fixes, please do share them with us.Why do streaming videos keep Buffering?
Buffering is the action of downloading the video content before it’s played. When the video is played faster than the speed at which the video content is downloaded, you face video buffering problems.How can I fix streaming problems on Windows 11/10?
Updating display drivers and the software you are using to stream videos is very likely to help solve the video streaming problem in Windows 11/10. For more suggestions, see the suggestions above in this post.
Some Windows 10 users are reporting that they receive the error code 0x80240008 when trying to download and install Windows updates on their devices. In this post, we will identify the possible causes as well as provide the appropriate solutions you can try to remediate the issue.
Error 0x80240008, The key for the item queried could not be foundFix Windows Update error 0x80240008
If you’re faced with this Windows Update error 0x80240008, you can try our recommended solutions in the order presented below to resolve the issue.
Run Windows Update Troubleshooter
Perform SFC and DISM scan
Disable/Uninstall 3rd party security software (if applicable)
Clear the Windows Update cache
Perform a Fresh Start, In-place upgrade repair or Cloud Reset
Let’s take a look at the description of the process involved concerning each of the listed solutions.1] Run Windows Update Troubleshooter
This solution requires you to run the inbuilt Windows Update Troubleshooter and see if that helps to resolve the Windows Update error 0x80240008 issue.
2] Perform SFC and DISM scan
If you have system file errors, you may encounter the Windows Update error 0x80240008.
The SFC/DISM is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files.
For ease and convenience, you can run the scan using the procedure below.
Press Windows key + R.
In the Run dialog box, type notepad and hit Enter to open Notepad.
Copy and paste the syntax below into the text editor.@echo off date /t & time /t echo Dism /Online /Cleanup-Image /StartComponentCleanup Dism /Online /Cleanup-Image /StartComponentCleanup echo ... date /t & time /t echo Dism /Online /Cleanup-Image /RestoreHealth Dism /Online /Cleanup-Image /RestoreHealth echo ... date /t & time /t echo SFC /scannow SFC /scannow date /t & time /t pause
Save the file with a name and append the .bat file extension – eg; SFC_DISM_scan.bat.
Restart your PC.
On boot, try updating again. If the error persists, continue with the next solution.
Related: Windows Update fails to install or will not download.
3] Disable/Uninstall 3rd party security software (if applicable)
Firewall and antivirus are important for your system safety, but sometimes these programs can interfere with Windows 10 and cause this Windows Update error 0x80240008 to appear.
McAfee, AVAST, and Comodo are all known to cause this particular issue. In this case, to fix this issue, you’ll have to remove all third-party antivirus programs from your PC using the dedicated removal tool to remove all files associated with your antivirus program. The reason is, it’s much more efficient and invasive to use the custom uninstall tools for the AV program from the manufacturer, if available, whenever uninstalling antivirus software, as there are registries and dependencies, installed deep within the OS which the traditional Control Panel uninstaller (appwiz.cpl) might miss in most cases.
If removing the antivirus fixes this error, you can now install the same antivirus again, or you can switch to an alternative software or better still stick to Windows 10 native AV program – Windows Defender.
4] Clear the Windows Update cache/components
The Software Distribution folder in Windows 10 operating system is a folder located in the Windows directory and used to temporarily store files that may be required to install Windows Update on your computer. This solution requires you clear the contents of the Software Distribution folder and then retry the update process again. If the error is still unresolved, continue with the next solution.
5] Perform a Fresh Start, In-place upgrade repair or Cloud Reset
At this point, if the Windows Update error 0x80240008 is still unresolved, it’s most likely due to some kind of system corruption that cannot be resolved conventionally. In this case, you can try Fresh Start, In-place upgrade repair to reset every Windows component. Also, if you’re running Windows 10 version 1909 and later, you can try Cloud Reset and see if that helps.
PS: More tips here to Troubleshoot Windows Updates Errors in Windows 10.
Update the detailed information about A Roundup Of Windows 10 Anniversary Update Problems And Solutions on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!