You are reading the article Americans Split On Use Of Contact Tracing Apps Powered By Apple/Google Api updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Americans Split On Use Of Contact Tracing Apps Powered By Apple/Google Api
Americans are divided on whether they would be willing to use coronavirus contact tracing apps powered by the joint Apple/Google API. A Washington Post/University of Maryland poll found an exact 50/50 split between those who would use it and those who wouldn’t.
That’s already less than ideal, but there were three further worrying aspects …
First, the results combine ‘definitely’ and ‘probably’ responses. It is common in research to assume fewer people will do something than say they will do something, so saying you will ‘probably’ do something is considered a weak indicator. And the percentage of Americans saying they would ‘definitely’ use an app powered by the API is just 17%.
Second, the survey also found that 4% of Americans don’t own a cellphone, and a further 13% don’t have a smartphone. So 17% of the population wouldn’t be able to use a contact tracing app, and the lowest rates of ownership are among the most vulnerable age groups.
Rates of smartphone ownership are much lower among seniors, who are particularly vulnerable to the ravages of covid-19, with just over half of those aged 65 or older saying that they have a smartphone (53 percent). Rates are even lower for those 75 and older, according to the Post-U. Md. poll.
Third, some 41% of respondents wouldn’t feel comfortable letting the app know they had tested positive.
59 percent of smartphone users said they would “be comfortable” using such an app, if they tested positive for covid-19, to anonymously alert others that they may have been exposed and should seek testing.
Willingness to use an app depended on political leaning and self-interest.
Willingness runs highest among Democrats and people reporting they are worried about a covid-19 infection making them seriously ill. Resistance is higher among Republicans and people reporting a lower level of personal worry about getting the virus.
Some of the findings show that Apple and Google have a lot more work to do in educating the public about the privacy safeguards.
A major source of skepticism about the infection-tracing apps is distrust of Google, Apple and tech companies generally, with [only] 43 percent who trust [them].
Epidemiologists say that around 60% of the population needs to use contact-tracing apps to stop the spread of the virus. So far, take-up in other countries isn’t encouraging, at around 20% in Singapore and just 8% in Australia. It should be noted, however, that neither app uses the Apple/Google API.
Apple, Google, and governmental agencies alike are all trying to rebrand contact tracing in order to make it sound less scary and more beneficial.
Google and Apple originally referred to their planned apps as “contact-tracing” tools, evoking the public health teams that track viral spread. But the companies more recently have begun referring to “exposure notification” apps — part of a shift in focus from the surveillance to the personal benefit.
After a call last week with Apple chief executive Tim Cook, Thierry Breton, a member of the European Union’s executive branch, went one step further, calling them “deconfinement apps,” a term that stressed their potential to relieve the economically devastating movement restrictions imposed by government officials worldwide as they try to slow the spread of the coronavirus.
However, it may be too late to do this, just as ‘the coronavirus’ has remained the commonly-used term for the virus rather than the official SARS-CoV-2 designation which followed sometime later.
FTC: We use income earning auto affiliate links. More.
You're reading Americans Split On Use Of Contact Tracing Apps Powered By Apple/Google Api
The Split View feature allows you to see two websites at the same time on your iPad. This article explains how you can use this feature to split your iPad screen so that you can see two Safari browser windows side by side. By using, I mean that how you can:
enter and exit Split View
resize and merge the views
You may split the screen into resizable views
See also: Safari Can’t Open The Page Because Safari Can’t Establish A Secure Connection To The Server, Fix
Please note that you can use this feature on certain iPad models. The following models support this:
iPad (5th generation and later)
iPad Air 2 and later
iPad mini 4 and later
Please also note that Split View only works when you iPad in landscape mode. Ensure that your iPad is positioned in landscape mode. And lastly, please note that you can only see two windows side-by-side.
This article focuses on splitting the screen in Safari. On your iPad, you can open two different apps at the same time, side-by-side for all of your multitasking needs.Enter Split View
There are a few ways to initiate a Safari split-screen session:
If you are using an external keyboard connected to your iPad, there is a shortcut you can use. Open Safari and simply press CMD+N.
See also: Quit Safari Is Grayed Out On Mac, Fix
Open a blank page in split screen:
In Safari, tap and hold the Tab button in the upper-right corner.
Tap Open New Window.
Open a link in split screen:
In Safari, find the link you want to open in Split View.
Tap and hold the link (this is also called long press). A popup menu will appear. And then, you can:
Tap Open in New Window.
Or alternatively, you can drag the link to the right or left side of your screen depending on your desired destination.
See also: Safari Cannot Open The Page Because Too Many Redirects Occurred
Turn a tab into split screen
You can turn a tab into a split screen view. Here is how:
Tap and hold the tab you want to open in Split View.
And then drag it to the right-hand or left-side side of your screen depending on where you want it to appear.
See also: Safari Loading Blank Pages on iPhone or iPad, FixResize the split
If you have two Safari windows open in Split View, you can resize the split as you fit. You will see a small vertical gray bar divider between the two views. To change the width of the two screens, drag this divider.
Basically you have three options:
If you want to give both views equal space, move the divider to the center of your screen.
If you want to give the left view a bigger space, drag the divider to the left of the screen.
If you want to give the right view a bigger space, drag the divider to the right.Exit Split View
To leave Split View, drag the gray bar divider all the way to the right or left side of the screen (depending on which one you want to close) until the view disappears.
You can also merge your screens. See below.
See also: How To Turn Off Split Screen In MailMerge both views
This is in fact another way of closing Split View. You may want to do this if you want to want to keep all your tabs. Here is how:
Tap and hold the tabs icon at the top right corner of either Safari window.
Tap Merge All Windows.
When it releases for the masses in September this year, iOS 15 will make things done much faster than ever before with improvements in Notifications, Weather, Spotlight, Photos, FaceTime, Apple Maps, Safari, and Find My. In addition to new features, you should also see changes that have been made towards user privacy and account security as a whole.
iOS 15 will be making maintaining access to your Apple account a little easier with a new option – Account Recovery. In this post, we’ll explain what this feature is all about, what do you need to use it, and how to set it up on your Apple ID account.
What is Account Recovery on iOS?
With the upcoming updates to iOS, iPadOS, and macOS, Apple plans to tackle the problem of not being able to remember your Apple ID password with a new feature – Account Recovery. The feature is set to help those of you who have the tendency of forgetting stuff including your account passwords so that you don’t get locked out of your own Apple account after entering the password incorrectly several times.
With Account Recovery, you can choose a person you trust like a friend or family to set them as your Recovery Contact. When you do that, you can contact this trusted person at a later time whenever you forget your Apple ID password or your iPhone’s passcode. This person will then receive a special code that should help you unlock your account immediately.
Required iOS version
Before you set up a recovery contact for your Apple ID account, you need to make sure that all of your Apple devices are connected to the same Apple. This makes sure that the same Recovery Contact can be used to unlock all your devices.
Once that’s behind you, you can go ahead and add a Recovery Contact for your Apple ID. For this, open the Settings app on your iPhone and tap on your Apple ID card at the top.
Inside the Apple ID screen, select the Password & Security option.
On the next screen, scroll down and tap on the Account Recovery option.
On the ‘Account Recovery’ screen, select the Add Recovery Contact option under ‘Recovery Assistance’.
When you do that, you’ll be greeted with an ‘Account Recovery Contact’ screen that pops up. Here, Apple will give you an idea of what Account Recovery is and how it works.
To proceed to the next step, tap on the Add Recovery Contact option at the bottom.
You’ll now be asked to authenticate this option using your Touch ID or Face ID.
Once you do that, you’ll be taken to the next screen. Here, you’ll be asked to enter the current password to your Apple ID. Enter your Apple ID password and then tap on the Sign in button at the top right corner.
Now, you will be required to add the contact information of the person you trust to help you reset your Apple ID password in the future.
Select all the people you want to add by tapping on the circle adjacent to their names to mark them with a tick and then tap on Next.
Follow the on-screen instructions to complete the setup process and you can repeat the steps again to add another recovery contact. The person you’re adding as your Recovery Contact will have to accept the invite that they get prompted with on their Apple device.
What happens when you forget your Apple ID password?
If you somehow forget your Apple ID password in the future and you’re locked out of your account, you can use the Account Recovery feature to get it back immediately. Although Apple doesn’t precisely explain how and where it will be visible, the basic idea is that you’ll need to contact the trusted person you selected as your Recovery Contact and they will be able to provide you with a verification code to help you regain access to your Apple ID account.
This verification should pop up on the Recovery contact’s Apple device and it will be sufficient enough to get your account unlocked. Since the feature is still in development, we’re yet to find out precisely where you can locate the verification code but we can expect it to be visible inside the Settings app.
Apple says that at no time will your recovery contact be able to access your data. They will only be able to help you recover it and log back into your Apple account.
After you have received the verification code from your trusted contact, you can get your account unlocked and then reset your Apple ID password by creating a new one. It’s unknown what might trigger iOS or macOS to get you to the ‘Recovery code’ screen but we believe it could appear after a handful of unsuccessful attempts at entering your Apple ID password.
Make sure you either jot down the new password that you have set for your Apple ID somewhere else or the password itself is easy enough for you to remember the next time around.
If you followed the steps we’ve mentioned above and you haven’t been able to set up a Recovery Contact for your Apple ID, then this is why you may be running into issues:
Your iPhone isn’t running on iOS 15: The ability to add a Recovery Contact is only available for iPhones that are running on iOS 15. Since iOS 15 is only available in beta at the time of writing, we suggest you wait till this fall for Apple to roll out the stable update for you.
All your other Apple devices haven’t been updated to their latest beta software: Since this is a protective measure, Apple doesn’t only request you to connect all your devices to the Apple ID but also makes sure you’re running them on their latest firmware. You won’t be able to use Account Recovery on your Apple ID account if your Mac isn’t running on macOS Monterey (beta) or your iPad doesn’t run on iPadOS 15 (beta). If you own a bunch of Apple devices, you can use the Account Recovery option either by updating all of them to their latest (beta) firmware or by removing them from your Apple ID.
The person you want to set as Recovery Contact doesn’t have an Apple device: For the Account Recovery option to work, the person you’re adding as your Recovery Contact should own an Apple device. This is a requirement as the setup process won’t go through the selected people aren’t Apple users themselves.
That’s all there is to know about Account Recovery on iOS 15.
Two results from the latest survey at the Pew Research Center paint a dismal picture of the typical Americans’ approach to cybersecurity. As it turns out, many U.S. citizens tend to distrust modern institutions’ claims to secure their data while at the same time trending towards neglecting their own security.
Here are both of the results from the report, which relies in data from a national survey of 1,040 adults in the spring of 2023, and what exactly those results might mean.Americans Don’t Trust Institutions
The majority of Americans, 64 percent, have “personally experienced a major data breach.” 41 percent of Americans have seen fraudulent charges on their credit cards, and 16 percent have had their email account taken over, the report indicates.
Perhaps unsurprisingly, half of Americans feel their personal data is less secure than it was five years ago. (I should note here that 18 percent feel it’s more secure, so this data point is a slight tempered one). This lack of trust falls mostly on social media and government agencies rather than on cellphone or credit card companies, the report explains:
“Many Americans lack faith in various public and private institutions to protect their personal information from bad actors. They express some level of concern about a variety of entities, ranging from telecommunications firms to credit card companies. But their fears are especially pronounced for two institutions in particular: the federal government and social media platforms.
Some 28 percent of Americans are not confident at all that the federal government can keep their personal information safe and secure from unauthorized users, while 24 percent of social media users lack any confidence in these sites to protect their data. By contrast, just 12 percent of Americans (and 9 percent of social media users) have a very high level of confidence that these entities can keep their personal information safe and secure.”But Americans Are Also Bad at Their Own Security
39 percent of internet-faring adults use the same or very similar passwords for the majority of their online accounts, which is a bad practice. But you probably already knew that: 25 of these adults admit that they “often use passwords that are less secure than they’d like, because simpler passwords are easier to remember than more complex ones.”
Plus, 41 percent of adults on the internet have let a friend or family member in on the password to one of their accounts online (Pew doesn’t share how many of these respondents were talking about their Netflix password… I would bet it’s fairly high.)High-Profile Hacks Might Bring More Awareness… Maybe
In short, Americans know that their own cybersecurity is lax, but just don’t seem to care enough to improve it. That’s not a great combo: It’s similar to someone shutting down from shock rather than take a life-saving measure.
But there may be hope. After all, the report comes from the spring of 2023, before a series of high-profile hacks, including emails from the Democratic National Committee, Yahoo’s announcement that hackers had accessed data from about 1 billion email accounts, and official statements from the FBI, the CIA and the Department of Homeland Security acknowledging that the Russian government had been involved in the DNC hack with the intention of influencing the 2023 presidental election.
Hopefully this additional information will help the American public realize that their cybersecurity issues cannot be ignored.
Introduction to JavaMail Api
JavaMail API is used to read, write and compose E-mails (Electronic messages). The JavaMail API provides a framework to create mail and messaging client applications using Java by platform-independent and protocol-independent. The JavaMail API provides the abstract class which contains the object defined in the mailing system and also performs an interface to E-mail Applications. JavaMail API is commonly used for reading and sending E-mails and needs service providers to interact with mailing servers that execute on the transport protocol.
Start Your Free Software Development CourseOverview of JavaMail API
JavaMail API provides a framework to create mail and messaging client applications by platform-independent and protocol-independent. The JavaMail API provides a set of abstract class which contains the object comprises the mailing system and also performs an interface to E-mail applications. It is generally used for composing, reading, and sending E-Mails (Electronic Messages). JavaMail API is a set of API’s that is used for a mailing system and it offers services for sending and reading E-mails. JavaMail offers an element that is used to construct an interface for a messaging system with interfaces and system components. JavaMail includes various classes which implement the MIME Internet Messaging Standards and RFC822; those classes are in the JavaMail class packages.Protocols Used in JavaMail API
Several protocols are used in JavaMail API, they are as follows,1. SMPT (Simple Mail Transfer Protocol)
It provides the mechanism for delivering the E-mails and it is an Internet Standard for receiving and sending E-mail across the IP Networks which uses the TCP with the most acceptable port 25 to send and receive emails. It has secure SSL connections. The JavaMail API has the core classes and packages in chúng tôi this will perform SMTP protocol provider to make a connection with any SMTP servers. We can make use of the Postcast Server, email Server, Apache James Server as on SMTP Server. Once purchasing the host-space by default SMTP Server provides us the hosting provider.2. POP (Post Office Protocol)
It is also called POP3, the main thing to provides the mechanism to receive the E-mails. It defines and maintains the particular/single Mailbox for every single user. The POP3 protocol is defined in RFC 1939. POP3 is a Standard Internet Protocol used by the Local E-mail Clients to right to use E-mail from Remote Server over TCP/IP protocols and it listens to the Port 110. The provider of POP3 Protocol in JavaMail API is com.sun.mail.pop3.3. IMAP (Internet Message Access Protocol) 4. MIME (Multipurpose Internet Mail Extension)
It defines and tells the browser about what the content is being transferred it does not have a mailing transfer protocol it only tells that what is actually sent for example any attachment, format of messages being sent, and so on. For various documents they have different effects they are RFC 2047, RFC 2046, RFC 2045, AND RFC 822, those formats are exist and used in the mail program itself.5. NNTP (News Transfer Protocol) and others
There are several protocols which are provided by the Third-Party Organisers and some are NNTP, S/MIME (Secure Multipurpose Internet Mail Extension), and so on.Architecture
As said earlier, Java Application uses JavaMail API to read, write and compose E-mails (Electronic messages). The JavaMail API provides a framework to create mail and messaging client applications using Java by platform-independent and protocol-independent. JavaMail API makes use of the SPI (Service Provider Interface) which is an intermediate service to the application of Java deals with various protocols. Let’s see the following architecture which describes the flow of JavaMail,
The conceptual mechanism of JavaMail API is related to other J2EE API’s like JNDI, JDBC, and JMS, by seeing the above architectural diagram the JavaMail API is divided into two essential parts,
Application-Independent: This part is an Application Programming Interface (API) which is used by the application components for sending and receiving the mailing messages. It underlies the independent provider or protocol used.
Service-Dependent: this part is a Service Provider Interface (SPI) which tells about the protocol-specific languages like POP, IMAP, SMTP, and NNTP. It is based on the plug-in provider of E-mail service to the J2EE Platform.Properties
In JavaMail API properties, there are only a few recognized properties referenced in javax. mail execution which comes up with J2EE reference implementation, those properties are set as Strings in that the type column defines that how the string is interpreted. Let’s see few properties as follows,
1. IMAP Configuration Properties
Name Type Description
Mail. imap.host String IMAP server to the connection – connect to
Mail. imap.user String The default user for IMAP – user name
2. SMTP Configuration Properties
Name Type Description
mail. smtp.port int It symbolizes the connection to the port. It sets the default to 25.
mail. smtp.timeout int The default timeout is infinite. The I/O timeout value defines in milliseconds.
3. POP3 Configuration Properties
Name Type Description
Mail.pop3.host String POP3 server to the connection – connect to
Mail.pop3.user String The default user for POP3 – user nameAPI provides classes that model a mail system
Javax.mail.Message It is an e-mail message which models the abstract class. The sub-class provides the implementations
Javax.mail.Session This is the main key class of API. It represents the connection factory and it is a multi-threaded object.
Javax.mail.Address Their sub-class provides the implementations. The abstract class describes the addresses from end-to-end in the message.
Javax.mail.Transport It is a message transport mechanism for sending/transferring E-mail messages.
Javax. mail.Authenticator This is used to secure the mailing resources on the mail server.
Javax.mail.internet.MimeMessage It is an E-mail messaging service that understands the MIME types (what is being used like formats etc.) and headers. It works on the sub-classes. The messages are abstract class.
Javax. mail.Store This purpose is to models a message store and accessing protocol for retrieving and storing the messages. The Stores is separated into folders.
Javax. mail.Folder It contains the sub-folders and the class represents a folder structure of mail messages.
The InternetAddress class represents an internal address of e-mail that uses the syntax of RFC822. The address format will be [email protected] or the Personal Name [email protected]
In this article, I have explained the JavaMail API. Hope the article helps you to understand.Recommended Articles
This is a guide to JavaMail Api. Here we discuss the JavaMail includes various classes which implement the MIME Internet Messaging Standards. You may also have a look at the following articles to learn more –
Google has updated its Cloud Print service, and now we can use it from tablets, smartphones, chromebooks, as well as PCs. How can we use Google Cloud Print on Windows? Let’s check it out.
Until now, we could connect our printer to the cloud Cloud Print, and then print from our mobile device whenever we happen to be. There was only one downside, namely the service has previously been accessible only via Chrome. What’s more, the service was limited to print files from smartphones or tablets with Android – it was impossible to print files from another PC.
Google Cloud Print service
Google Cloud Print extension for Windows comes with two add-ons. The first component is a Google Cloud Print service, which lets you easily share printers in the cloud. Once you installed it, it runs silently in the background and makes your printers accessible in the cloud. Thanks to the inclusion of this service running in the background, we do not need to use our browser every time we want to print something from another device.
For this step, we need to use Google’s website and select: Download Cloud Print service. We need to launch Chrome to download and configure the service. When this is done, Cloud Print will ask you for authorization.
From now on, our printers are available in the cloud and we can print files directly from other devices using Google Cloud Print. We no longer need to run Google Chrome on the computer sharing the printer.
Printing files from another Windows PC
The second element is Google Cloud Printer, a virtual printer driver. If you carefully followed the instructions presented above, you already know how to print from a web page. But there’s still more than we can do with Google Cloud Printer. For example we can print from our Windows computer. For this reason, the service provides virtual printer driver, so that it is displayed in the system as a normal printer. If you want to print something from a text editor or any other program, your file will be redirected to the proper printer available in the cloud Google Cloud Print. In this way, Virtual Printer acts as a relay.
The service works fine and I did not notice any problems while testing except one – the service may not be able to print files from Modern UI in Windows 8. When it comes to traditional desktop applications, it works without any issues.
Update the detailed information about Americans Split On Use Of Contact Tracing Apps Powered By Apple/Google Api on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!