Trending March 2024 # Android Tv Problems And How To Fix Them # Suggested April 2024 # Top 5 Popular

You are reading the article Android Tv Problems And How To Fix Them updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Android Tv Problems And How To Fix Them

David Imel / Android Authority

Android TV, Google’s OS for televisions, is one of the best smart TV platforms around. You get quick and easy access to every streaming and music platform, various games and educational apps, and you also have the option to cast from your phone. Like with any operating system, though, Android TV might face software bugs and glitches that make their TVs challenging to use. Here’s a look at some common Android TV problems and how to fix them.

Editor’s note: We used a TiVi Stream 4K running Android 10 for the steps mentioned below. They might be slightly different, depending on the TV you have and its software version.

Potential solutions

The first step is to check your Wi-Fi or network connection. See if another device, like your phone or laptop, can connect to the network. Try a website, or any app that uses the internet. If they can access the web, we know the problem is the Android TV device. If you’re offline, try restarting your router. You can do this by unplugging the router, waiting for about a minute, and plugging it back in.

Potential solutions

If that doesn’t work, it might be better to uninstall and reinstall the app. In the same menu, select Uninstall. You can find the app in the TV’s Google Play Store and install it again.

Some apps have problems after updates, but the only option is to wait for future updates for the issue to go away.

Potential solutions

Some Android TVs have a dedicated system optimization option. Look for a shield icon next to the gear icon at the top right corner. Select System optimize (or System speedup). You should see any download pending errors after that. Remember, not every Android TV will have a dedicated button to clear the system cache.

Potential solutions

The obvious first step is to check the batteries. Replace the batteries and see if the remote starts working.

The screen will give you instructions for the pairing process. You usually have to press and hold a couple of buttons. Press In our case, these are the Back and TiVo buttons. Some also use Home and Select buttons. Keep the remote close to the TV (less than three feet) when this is happening.

If the remote isn’t working, it might be a hardware problem, and you will need to get a replacement. You can use the Android TV Remote app or a third-party remote app from the Google Play Store. If that works, then you know your remote is to blame.

Potential solutions

Potential solutions

Your set payment method might require additional verification to complete a purchase. Unfortunately, you cannot complete these verification steps on an Android TV. You can try changing payment methods to one that might not require extra verification. The better option is to buy the app, movie, or TV show on another device like your phone or computer.

For an app, select Android TV as the device you want to install the app on. It should automatically show up on your Android TV for movies and TV shows. If it doesn’t, go through the account sync steps (see above).

Get manufacturer-specific help for Android TV problems

Dhruv Bhutani / Android Authority

With various manufacturers making Android TVs and the changing software, creating a comprehensive how-to guide on Android TV problems without accounting for every model and software version isn’t easy. Every TV maker has a different set of troubleshooting guides worth checking out. Popular Android TV brands include Sony, TCL (Android TV and Google TV), and HiSense.


Android TV is the operating system for Google-powered smart TVs. It is based on the mobile Android OS, but modified to work better on a larger screen for media consumption. In turn, Google TV is a skin made to improve the experienced, and it is based on Android TV. Essentially, Google TV lives on top of Android TV. Think of it as an Android TV launcher of sorts.

The latest Android 12 version is based on Android 12.

Yes! You can turn any TV into an Android TV by buying an Android TV dongle or set-top box. Even old TVs, as long as they have an HDMI port.

Android TVs have access to the Google Play Store, but not to the whole portfolio of apps. Apps need to be optimized for Android TV first. Most of the important ones are available, though.

You're reading Android Tv Problems And How To Fix Them

Spotify Problems And How To Fix Them

Potential solutions:

Spotify not working could be because of problems with the app itself. Like any streaming service or website, Spotify can have the occasional planned or unplanned service outage. So the issue might not be with your device. You can see if there are widespread reports of Spotify problems by checking sites like Down Detector or Down for Everyone or Just Me. The Spotify Status Twitter account also shares updates when the service is facing any downtime.

Spotify lets users download songs for offline access, but for the most part, using the app requires an active Internet connection. Check your network connectivity to ensure it isn’t causing any problems. A simple test is to open another app or website that requires data to see if it’s loading. We have helpful guides on fixing Wi-Fi problems and what to do if your phone won’t connect to Wi-Fi if you have run into network connectivity problems.

Most of the time, simply shutting down and opening the app or turning your device off and on again helps fix the problem. If it doesn’t, you can try clearing the app or browser cache and cookies on Android or clearing the cache on any platform to see if the problem goes away. If nothing works, it’s best to delete and reinstall the app. Clearing the app storage or uninstalling it will completely reset the app, so you might lose data like saved playlists if it isn’t synced across devices.

Don’t forget to update the app to the latest version since software updates usually bring bug fixes that should help solve some problems.

Potential solutions:

Music streaming doesn’t require particularly fast Internet connections. But fluctuations and unstable connections could cause problems with audio quality. Spotify sets the audio quality to Auto by default and changes it depending on the connection speed. You can set the audio quality to a particular level to circumvent the issue.

Potential solutions:

Potential solutions:

This feature is only available for Premium users, so ensure that your subscription is active. Log in to your Spotify account page and check your subscription details in the Your Plan section.

Spotify lets you download songs on up to five devices, but there is a limit of 10,000 songs. This may seem like a lot, but you might surpass the limit if you download multiple playlists and albums across different devices. You cannot download any more music until you remove the downloaded content.

You may also be unable to download songs if your device doesn’t have enough storage. Spotify recommends having at least 1GB of free storage available and more if you download a lot of songs. Check out our guide on how to free up storage if you run into this problem.

Potential solutions:

First, ensure that you have an active subscription. Go to your Spotify account page and check your subscription details in the Your Plan section. You may have logged in with the wrong account if you see Spotify Free. Remember to use the same login method as when you signed up. So if you did so using Facebook, Google, or Apple ID, log in the same way. If your login credentials are correct, go to Check your payment status to see if a payment is pending or has failed.

If you see an active subscription, Spotify recommends simply logging out and signing back in.

When someone invites you to a Duo or Family plan, the primary account holder has control and may have accidentally revoked your access. Check to ensure that you haven’t been removed from the plan. Spotify will also automatically remove you from the plan if you don’t verify your information, like your address, within seven days of getting the verification email. Remember that if verification fails or you don’t respond within a week, you will not be able to join another Duo or Family plan for 12 months.

Potential solutions:

Potential solutions:

Remember that the device you want to listen to music from has to be connected to the same Wi-Fi network as the control device. Your target device may have dropped off Wi-Fi because of a weak signal or an oversaturated router. Wi-Fi 5 routers, in particular, can have trouble with the dozens of connections in modern homes, in which case it may be necessary to disconnect some products or upgrade to a router with Wi-Fi 6.

When the app detects compatible speakers and other devices, a Devices Available will show at the bottom left on mobile and bottom right on desktop. If the Devices Available icon isn’t there, go to Settings and select Show Available Devices. If you don’t see your target device on this list, ensure it is on and connected to the same Wi-Fi network. Keep in mind that some devices, like Echo speakers, require additional steps.

6 Annoying Router Problems – And How To Fix Them

These days, having access to wireless broadband is an absolute necessity for home offices and small businesses. And after more than a decade of innovations, you would think that the standard wireless gateway/router would be a picture-perfect product by now. Alas, no.

While many routers offer good features, most still come with flaws that can make life a lot harder, such as confounding setups or limited security.

What follows are six router problems that, quite frankly, I find the most annoying. I looked for possible solutions, and while I didn’t find one router that addressed all my concerns, I did discover features — and routers — that could make things a lot easier.

1. Difficult configuration

The problem: How long does it usually take you to set up your router? When was the last time you were able to get it right on the first try? What about when you wanted to add a new PC to your wireless network? And how about getting your wireless printer to connect to your network?

Let’s face it: Each network is different, and getting the right combination of settings can be confounding. For example, even some reasonably experienced PC hands may not understand the differences between security settings or know that WPA-2 offers better protection than WEP and ordinary WPA.

These and other hitches are why setting up any router can still be vexing, even to an experienced computer user. Some, such as the Buffalo AirStation Wireless-N 300Mbps Cable Router WHR-HP-G300N ($53), have crowded menus with multiple layers that make navigation painful. Others, such as the Netgear RangeMax Dual Band Wireless-N Gigabit Router WNDR3700 ($170), rely on a protected setup that has a long series of instructions that have to be followed to get a new PC on your network.

Almost all routers have Web-based configuration screens, and as long as you remember the device’s IP address, default username and password (which you should have changed when you set it up), you should be able to get into the setup screens and make any adjustments you need. It’s just a matter of figuring out which adjustments are necessary.

Cisco has also made it a lot easier to set up other devices, such as wireless printers, by providing a summary screen with all the relevant information about your wireless network that you can print out for easy reference when you run the setup program on the USB key.

Buffalo has a nice diagnostic routine that checks to see if you have Internet connectivity and that your router is configured properly. You run it from the Web configuration console.

Apple’s AirPort Express ($99) is simple to set up and has some neat features, including the ability to share USB printers and to share audio across the network to a connected stereo receiver. You can also extend the range of your existing AirPort base station, which is something that most Wi-Fi routers can’t easily do. But if you’ve got a Windows PC, you’ve got to install Bonjour, and adding a new PC to an existing network isn’t as easy as it could be.

2. Enabling file sharing from your router

The problem: Why spend money on a separate network-attached storage (NAS) unit when you can use your router for sharing files? Many routers come with USB ports to which you can connect an external USB drive for simple backup or file sharing.

Sadly, although plugging in an external drive should be as easy as — well, as just plugging in the drive — getting that drive set up isn’t always simple. The Linksys WRT610N Wireless-N Router ($200), for example, has a complex setup screen that you need to fill out when you attach a USB drive to it.

It would be nice to have software that enables the sharing without a lot of setup hassles. It should be easy to connect the computers across your network to this shared storage, by using either the router’s SSID name or IP address. You also need to be able to password-protect your shared drive so that it isn’t open for anyone who’s connected to the network.

It’s all a matter of what software is used to configure the USB drive and whether you need anything else on the Windows or Mac client end to connect to the shared drive.

Best available routers: The Belkin N+ Wireless Router ($120) has a separate software configuration utility that works for both Windows and Mac systems and needs to be run only once to set up the external shared drive. After that, you can connect to the shared drive by entering its IP address, such as The product isn’t perfect, though: There is no way to password-protect the files on the shared drive.

The Netgear RangeMax doesn’t require any additional software and can password-protect the files. It also offers a wide variety of access methods, including FTP and Web sharing, from its setup screen.

Problems With The Lg V20 And How To Fix Them

LG V20 review

Best LG V20 cases

However, as in the case with any current smartphone or tablet, the latest LG flagship is not without its issues. Which is why, we’ve rounded up some of the common problems that have plagued LG V20 owners, and offer potential solutions on how to fix them!

Disclaimer: Not every LG V20 will face these problems, and in fact, it is more than likely that you won’t come across any of these issues at all. 

This may be an issue with the battery calibration. For some users, a simple re-calibration trick seems to have worked. First, discharge your phone until it turns off. Then with the device off, charge it until the LED indicator shows that is charged fully. Unplug the charger and restart the device. The battery indicator may still not say 100%, so plug it in until it goes to 100%, or as close as possible. Repeat this process until it says 100% when you restart the device for the first time after discharging. Keep in mind however that this is process that shouldn’t be repeated often, so if the battery issue returns after the first calibration is done, waiting for another fix may be the best option.

There are a few apps that you can try as well to help calibrate the battery. Advanced Battery Calibrator is available on the Google Play Store, but keep in mind that the app has a better chance of success if you have root access on the device.

Download the Greenify app from the Google Play Store. Here, you can see a list of applications that are active on waking the phone, and you can then change the settings for these apps, which should help with reduce any slowdowns.

A rogue app could be the cause for any stutter or lag. Boot the device into Safe Mode (you can find the instructions on how to do so below) and see if the problem persists. If not, an application is the issue. You can then either delete the last few apps you have may have installed before the problem started, or perform a factory reset and start over, even though that is recommended only as a worst-case scenario, since you will lose all your data.

LG packs a lot of features into the software experience. Disabling these, only if you don’t use them often of course, could provide a boost in performance.

If you have bought the LG V20 from a US network carrier, your device may also come with a lot of pre-installed bloatware. While you won’t be able to delete these apps, you can disable them. Go to the Apps section in the Settings menu, find the relevant application, and disable it there.

Problem #3 – Problems where picking up a replacement is the only option

There are some problems with the LG V20, particularly related to hardware, that can’t be fixed easily. The only option here is to get the device repaired, or pick up a replacement. Below is a list of such problems –

“Shattergate” – Quite a few users have noticed that the protective camera glass on the LG V20 tends to scratch easily, and sometimes completely cracks or shatters, even after just a minor bump or drop, and is something that is definitely not expected from a device that boasts a MIL STD-810G rating for shock and impact protection. Until then, a protective case might be a good option. Here is a list of some of our top picks for the LG V20.

Speaker issues – A few users have reported hearing crackling or hissing sounds from the speaker, especially when at the highest volumes. If the problem persists, the best option would be to get the device replaced.

Headphone jack issues – Some users have found the headphone jack of the V20 to be somewhat lose, with the cable tending to move around a bit after the headphones are plugged in.

Charging issues – This generally has to do with a faulty charger. Make sure that the wall plug is working as expected, and you can use an alternate charger to charge the V20 to make sure that the device isn’t faulty.

Turn the device and the router off for at least ten seconds, then turn them back and retry the connection.

Go to Settings – Power saving and ensure that this option is turned off.

Use the Wi-Fi Analyzer to check how crowded your channel is, and switch to a better option.

Forget the Wi-Fi connection by going to Settings – Wi-Fi and long tapping the connection you want, then selecting “Forget”. Re-enter the details and try again.

Make sure the router firmware is up to date.

Make sure the applications and software on the device are up to date.

Go into Wi-Fi – Settings – Advanced and make a note of your device MAC address, then make sure that it is allowed access in the router’s MAC filter.

Bluetooth issues

With issues when connecting to the car, check the manufacturer’s manual for the device and the car and reset your connections.

Ensure that you are not missing a vital part of the connection process.

Go to Settings – Bluetooth and ensure nothing needs changing

Go into Settings – Bluetooth delete all prior pairings and try setting them up again from scratch.

When it comes to issues with multiple device connection, only a future update will be able to address this problem.

Guides – Soft reset, hard reset, wipe cache partition, hardware control mode

Soft reset

When the screen is not responsive, press and hold the power button for 10 seconds, until the device restarts.

Alternately, you can also pull the battery to shut down the phone.

Hard reset

Turn the device off.

Press and hold the power button and the volume down key simultaneously, and when the LG logo is displayed, release only the power button, and then immediately press the power button again, and wait till the factory reset menu comes up.

Press the power button to continue, or the volume keys to cancel.

Booting into Safe Mode

Turn off the phone and restart it. When the LG logo appears, press and hold the volume down key until you see the home screen, which should take it into Safe Mode.

When the phone is on, press and hold the power button till the shutdown options appear. Press and hold the “Power off” option till a confirmation pops up and tap OK. This will boot the device into Safe Mode.

Hardware control mode

If the display of the phone is broken or damaged, you can still perform some basic functions using the hardware buttons.

Turn off the phone.

Press and hold the power button and both volume keys together for more than 10 seconds to enable the hardware key control mode.

Press the volume keys to scroll to the option you want, and press the power button to confirm.

To answer a call, you can now press both volume keys at the same time to do so.

to end a call, press the power button during the call.

To stop the alarm, press and hold the volume keys together when the alarm rings.

Pixel 4 And 4 Xl Problems And How To Fix Them

David Imel / Android Authority

The Google Pixel 4 and 4 XL are excellent phones, particularly if you’re into smartphone photography. Unfortunately, they also have their fair share of problems that need to be addressed. Running into problems with your new device? Here’s a roundup of some common Google Pixel 4 and 4 XL problems and their fixes!

Editor’s note: We will continue to update this list of common problems Pixel 4 and 4 XL owners face. Keep in mind that not every device will have these issues. In fact, it is more than likely that you won’t come across these problems at all.

You can also go through standard bug fixing procedures. Clear app data and cache, uninstall and reinstall the Google app, and delete and redo Voice Match. If all else fails, a factory reset (you can find out how to do so below) may be an option.

While the steps above have worked for some users, quite a few have reported that the issue still persists. Google is aware of this bug and a software update will hopefully address it.

2. Wired headphones not working with the phone

Some users are having trouble using wired headphones with the Pixel 4 and Pixel 4 XL. The phone doesn’t recognize the connected device and continues to play music through its speakers.

Potential solutions:

This issue is most likely caused because of compatibility issues with third-party USB-C to 3.5mm adapters. You will need an adapter that is a DAC (digital to analog converter). While the Pixel 4 doesn’t come with an adapter in the box, the official Google adapter is still the best way to go if you’re looking for one.

Of course, make sure that there aren’t any problems with the headphones first. Use it with other phones and laptops to ensure that it’s working as expected.

You could also try cleaning the USB-C port. Turn the phone off and use a soft toothbrush or a wooden toothpick to clean out any lint or other build-up. You can also use compressed air as long as the intensity isn’t too high.

A soft reboot has also worked for some users. However, the problem goes away only temporarily in most cases.

The best solution to this problem isn’t ideal but has worked for most. Simply factory resetting the phone seems to do the trick. Make sure that you back up all important data and media before doing so because the phone will be erased completely.

4. Problems where the only option is to wait for a software update

There are some issues that don’t have a workaround just yet. However, a lot of them are software problems that will likely be fixed with an upcoming update.

Sensors not working: Many users find that the sensors of the Pixel 4 and 4 XL randomly stop working. This directly affects features like auto-rotate, active edge, tap to wake, and more. This is a well-documented problem that Google is aware of. The March software update has fixed it for some users but many are still facing the issue.

Visual Voicemail not working: Some users are not able to use Visual Voicemail as expected. It’s still not clear if this is an issue with the phone or with the network carrier. Either way, an update is the only thing that will address it.

Issues with WPA3: Many Wi-Fi routers and access points now support WPA3. Unfortunately, Pixel 4 and 4 XL owners are facing frequent disconnections when connecting to the network. More often than not, users also have to enter credentials again when attempting to reconnect.

5. Problems where the only option is to get a replacement

If you run into any hardware issues, the only option available is to pick up a replacement.

Display issues: Pixel smartphones haven’t had the best track record and some of the most common Pixel 4 and 4 XL problems have to do with the screen. Some users are seeing grey and pink splotches on dark and black backgrounds. However, this shouldn’t be mistaken with the grey glow seen at the top of the screen when the Soli system is activated to sense gestures.

Mic issues: A few users are facing an issue where the mic stops working completely. For most, the problem seems to be because of a case. If so, simply removing the case does the trick. However, if the problem persists, or you don’t use a case, the only option is to get it replaced.

Battery stuck at 50%: A lot of people have run into an issue where the phone doesn’t charge beyond 50%. Some users have found that the phone randomly powers off as well. Unfortunately, this seems to be a hardware problem, and the only option is to get your phone replaced.

Wireless charging not working: Some users are reporting problems with wireless charging on their Pixel 4 and Pixel 4 XL. This is a hardware issue and it seems like a connector is breaking. In more extreme cases, users are reporting swollen batteries. You can check if it’s the latter by seeing if there is a gap between the sides and the rear glass panel. In either case, your only option is to pick up a replacement.

7. Guide — How to factory reset the Pixel 4 and 4 XL

Resetting the phone to factory settings is often a last-ditch solution to fix some problems that users come across on their phones. However, don’t forget to back up important data, files, and media because this process will erase everything.

Reset with the phone on

Go to “Settings.”

Tap “Erase all data (factory reset)”  and then “Reset phone.”

You may have to enter your PIN, pattern, or password.

Tap on “Erase everything.”

Reset with the phone off or if it’s unresponsive

Press and hold the power and volume down buttons simultaneously until Fastboot mode (image of a triangle with an exclamation point) appears.

If you see “No command” on the screen, press and hold the power button. While holding the power button, press the volume up button and release both.

Select “Recovery mode” by navigating the list with the volume up and down keys. Use the power button to select the option.

In the Recovery menu, use the volume keys to go down to “Wipe data/factory reset.”

Select “Factory reset” in the next menu.

Once complete, select “Reboot system now.”

Android Oreo Common Issues And How To Fix Them

Android Oreo has been received with much fanfare. In fact, I, too, am in love with this new update. Of all its features, I especially love the password autofill, the notification dots, and the picture-in-picture mode. However, Android Oreo’s release has not been without complaints. A lot of users are complaining about numerous bugs which have plagued this release. Now, any new OS update always suffers from some bugs, but, in the case of Android Oreo, the bugs are pretty annoying as they are messing with some of the basic functions of the OS. One more frustrating thing about Android Oreo’s update is that some of the features differ depending on the device you are using. If you are a Pixel owner, you will be receiving an update which is both aesthetically and functionally better than the one received by the owners of the Nexus line of devices. This is just unacceptable. So, in today’s article, we are going to cover all the Android Oreo common issues which users are experiencing and also the steps to fix them.

1. Bluetooth Connectivity Problems

One of the major problems that users are experiencing after updating their device to Android Oreo is with their Bluetooth connectivity. Users are experiencing frequent drops in the Bluetooth connectivity as the connection has become erratic and sporadic. Although a proper fix will be released by Google, you can take some steps to ensure proper functioning of your phone’s Bluetooth.

3. If even that doesn’t work, try to start your device in the Safe Mode. To do that, press and hold on the power button for five seconds to bring the “Restart” and “Power Off” button. Here, press and hold on the “Power Off ” button to restart the device in Safe Mode. The Safe Mode will check for any software corruption that your device might have. After you have done that, to go back to the normal mode, restart your device as you normally do.

2. WiFi Connectivity Problems

Although WiFi connectivity problems have not been as widely reported as the Bluetooth connectivity one, there are some users who are complaining about some bugs. The steps to fix your WiFi connectivity problem will be the same as the ones which we just went through. First, we will “Forget” all the saved network connections. If that doesn’t solve the problem we will reset the network settings and as a last resort, we will try to restart the smartphone in the Safe Mode. As the last two steps are the same, I won’t be writing them again here. You can just follow the ones mentioned above.

As mentioned before, steps 2 and 3 will be same as that mentioned in the “Bluetooth Connectivity Problems” subheading. If the first step doesn’t solve your problem, follow them.

3. Square Icons on Nexus Devices

Well, you can install a custom APK of the Pixel launcher to get most of its features including rounded icons, notification dots, and all sorts of stuff. What’s even cooler is that this APK can be installed on devices running Marshmallow and higher, allowing you to get these features even if you own a secondary device which has yet not been updated to Android Oreo.

1. Just head over to this link and download the APK file shown in the picture and install it. Then make it your default launcher.

3. Now, select the “Circle” option to get the rounded icons. The below picture shows you new circular icons which you get after selecting the said option.

4. No Night-Light

Another feature missing in the Nexus devices which is present on the Pixel devices is “Night Light”. Night Light is a very handy feature which filters the blue light coming out of your smartphone’s display, giving it a warmer hue. It is a very handy feature as the warmer colours are easy on your eyes especially in the night time. Also, blue light has been found to interfere with our sleeping patterns, hence people using their smartphones in the night have trouble sleeping. These days, the Night Light feature is natively included in almost all your smart devices including laptops (macOS and Windows) and smartphones (iOS and Android).

As all OEM’s including Google (Pixel) include this blue light filter feature, I really cannot grasp the reasoning behind its removal in the Nexus devices with Android Oreo update. Thankfully, there are a couple of good third-party apps which can help you do that. If your device is not rooted, you should go with Twilight (Free/$2.99). However, if you have a rooted device, the ever popular, “f.lux” (Free) will give you more control. If you are looking for some more options, you can check out our article which lists the best of them.

5. No Auto-Enable WiFi in Non-Pixel Devices

While we are on the topic of features which Google kept exclusive to their Pixel devices, here’s one more. There’s no toggle which allows the device to automatically enable WiFi when you are nearby a saved network. I don’t know why Google kept this feature exclusive to Pixels, but it is what it is. But, you don’t have to worry much, as there is an app which can allow you to do just that.

Download the “Smart WiFi Toggler” app from the Play Store and it will do the work for you. Not only that, the app also disables your smartphone’s WiFi when you move out of the range of your saved WiFi networks. Just launch the app and it will guide you through its simple and easy set-up process. Once you are done with the setup, the app will work flawlessly.

6. Persistent “Apps Running in Background” Notification

1. First, install the “Tasker“($2.99) app and the “Notification Listener” (Free) app from the Play Store. Now, download the Tasker Profile needed to activate this feature. The profile was made by Marco himself, and you can download it by tapping on this link.

2. Open Tasker, and tap on “Tasks”. Now, tap on Tasks again to bring the import menu. Tap on it to import the XML file that we downloaded.

3. Tap on the arrow present on the top right corner and navigate to the downloaded file and import it.

4. Now, you should be able to see your imported file in the “Tasks” tab. Now, tap on the “Profiles” tab.

6. Now, on the pop-up card, tap on “Tasker” and then select “Monitor Start”.

7. Press the back button and then select the “Snooze” task that we already imported. Once you have done that, Tasker will stop any persistent notifications from showing up on your smartphone.

What really happening here is that the Tasker profile we created snoozes the “app is running in the background” persistent notifications for a very long time (some thousand of years). This ensures that, you won’t see that notification ever again.

7. Battery Issues

Some of the users are also complaining about getting lower screen-on time after updating their devices to Android Oreo. Although I haven’t experienced this problem on my device, if such a problem persists, you will have to wait for a proper update to fix this problem at the OS level. In the meantime, you can extend your smartphone’s battery life by using the extensive battery optimisation options provided in Android Oreo.

SEE ALSO: 12 Cool Android 8.0 Oreo Tricks You Should Know

Android Oreo Common Issues and Their Fixes

Update the detailed information about Android Tv Problems And How To Fix Them on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!