You are reading the article Block Untrusted Fonts To Keep Your Network Safe In Windows 11/10 updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Block Untrusted Fonts To Keep Your Network Safe In Windows 11/10
Fonts seem innocent when on the computer. Most of the time, we do not even pay attention to the fonts on web pages except when they are too hard on the eyes. But untrusted fonts on web pages may be misused by hackers to compromise your network. This post explains how to block untrusted fonts in Windows 11 and Windows 10.
While working locally, almost all the fonts we use, come from the %windir%/fonts folder. That is, the fonts are installed into the Windows fonts folder when Windows or any other application is installed. These are trusted fonts and do not pose any threat. When we encounter such fonts on web pages, they are loaded from the local fonts folder.
But when the fonts on a webpage are not present on our computer – i.e., the local fonts folder – a copy of that font is loaded into our computer’s memory, and that is when a cybercriminal can gain access to your network.
Dangers of untrusted fontsWhen a web page utilizes a font that is already present in the local fonts folder, the browser picks up the fonts from the local folder to render the webpage. Since the fonts in the local font folder are scrutinized by antivirus programs when being installed, they do not pose a threat.
The best method is to avoid browsers from using “elevated privileges” and that can be done in Windows by blocking the fonts that are not present in the local folder. In such cases, the website will be rendered by substituting the untrusted website fonts with the trusted fonts in a local folder. This may, however, cause the webpage to render improperly and create problems while printing.
Three states available for untrusted fonts in Windows 11/10There are three options available to you when it comes to untrusted fonts in Windows 11/10. They are:
Block the fonts
Audit mode: you do not actually block the font, but you keep a log that shows if untrusted fonts were loaded and if yes, which website and application used them
Exclusion of apps: You can whitelist some of the apps on Windows 10 to use untrusted fonts if you think they won’t be a problem; For example, if you whitelist Word app, it can utilize third-party fonts originating from the Internet even though you have blocked untrusted fonts
The best method, in my opinion, given the limited number of options, is to block all untrusted fonts and whitelist only those apps that pose less threat via downloading fonts to local memory. Compared to browsers, apps like Microsoft Word, Excel, etc. pose less of a threat as when the fonts are downloaded, your anti-malware is triggered, and if it finds anything objectionable, it will give you a message or block the downloaded fonts. Browsers, on the other hand, are a complex architecture (relying on rendering engines and processors, etc.) so even if the antimalware blocks fonts in memory, cybercriminals may still be able to take control of the machine easily.
Block untrusted fonts in Windows in an Enterprise Using Registry EditorTo block untrusted fonts in Windows 10 and to whitelist apps that can use untrusted fonts, you will have to use the Windows Registry Editor. As of now, there is no graphical user interface that makes it easier for the admins. The following explains how to block untrusted fonts in Windows 10.
Press WinKey+R and in the Run dialog that appears, type regedit and hit Enter key
Navigate to:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerKernel
To turn off untrusted fonts, enter 1000000000000.
To run audit mode, enter 3000000000000.
To turn it off, enter 2000000000000.
For example, if there is a value of 1000 already in the QWORD we created, it should look like 30000000000001000
Close the registry editor, save work in any other applications that might be open, and reboot the computer.
As mentioned earlier, there may be problems viewing the websites or printing when you turn off untrusted fonts. To get around it, it is recommended that you download and install the font manually into the %windir%/fonts folder. That will make it safer to browse the website using that font. Though you can exclude or whitelist apps, it should be done only if you can install the fonts for some reason.
Using Group Policy EditorIf you use Windows 11/10 Enterprise and Windows 11/10 Pro editions, you can make use of the Local Group Policy Editor.
Run chúng tôi to open the Local Group Policy Editor and navigate to the following setting:
In the right pane, you will see Untrusted Font Blocking. Select Enabled and then choose Block untrusted fonts and log events from the drop-down menu.
This security feature provides a global setting to prevent programs from loading untrusted fonts. Untrusted fonts are any font installed outside of the %windir%Fonts directory. This feature can be configured to be in 3 modes: On, Off, and Audit. By default, it is Off and no fonts are blocked. If you aren’t quite ready to deploy this feature into your organization, you can run it in Audit mode to see if blocking untrusted fonts causes any usability or compatibility issues.
NOTE: This policy setting could make your Icons & Web Fonts go missing when you visit a webpage.
How to view log of apps accessing untrusted fontsIf you choose the audit method, you will find that none of the untrusted fonts are blocked. Instead, a log will be created that you can use to see which app accessed which untrusted font type and where, when, etc. details. To view the log, open Windows Event Viewer.
Go to Application and Service Logs/Microsoft/Windows/Win32k/Operational.
Under the EventID: 260, you will find all the log entries related to access of untrusted fonts by different browsers and apps during the runtime of the local computer.
An example of the event log would be as follows:
WINWORD.EXE attempted loading a font that is restricted by font loading policy.
FontType: Memory
FontPath:
Blocked: true
Another example could be:
Iexplore.exe attempted loading a font that is restricted by font loading policy.
FontType: Memory
FontPath:
Blocked: false
Source: TechNet.
You're reading Block Untrusted Fonts To Keep Your Network Safe In Windows 11/10
How To Make Your Own Fonts With Windows Built
Windows 10 has a huge library of fonts readily available for use in a lot of programs installed on your computer. What a lot of people don’t know though is that Windows 10 also comes with a built-in tool called ‘Private Character Editor’ which allows you to create your own custom fonts from scratch and edit existing fonts. If you’d like to know where to find and how to use the feature, this guide has all the information you need.
How to Fix Graphical Glitches and Display Bugs on Microsoft Edge.
Fonts are one of the quickest and easiest ways to add some spark, creativity or a sense of importance to your projects and although there are thousands of fonts available online, you may wish to create your own. As well as a seemingly countless number of fonts available online there are also almost as many online font creation tools to choose from, some free, some paid, some good and some bad. Before you start searching for a tool online, make sure you check out the built-in Windows tool.
Note: The only downside to creating your own font is that it won’t be readily available on other machines.
How to Create Your Own Fonts With Windows Built in Font Editor.For such an interesting feature, it’s strange that Microsoft has decided to hide the font creation tool so deep within the operating system. You can find the tool using either of the below methods.
The first is to go to: C:WindowsSystem 32 and open the chúng tôi
The second is to open the Windows Run tool and run the following command: eudcedit
Once you have the tool open, using it is relatively easy, however, it does look quite complicated. The first thing you need to do is pick a random box from the grid, this will assign your font character a code which is used for search and indexing. As this is most likely the first time the tool has been opened on your computer it doesn’t really matter which code you pick. If you are planning on making an entire front from A-Z including numbers and characters, I would suggest starting from the top left and working your way through the grid.
As soon as you have selected a code, the screen will change to a 64×64 grid layout, which is where you will be designing your font. On the left-hand side, you will see a list of tools you can use, pen, brush, straight line, hollow rectangle, filled rectangle, hollow ellipse, filled ellipse, rectangular selection, freeform selection, and eraser. (you must create your font in black which doesn’t matter because you manage font colors in programs)
How to Save Created Fonts in the Windows 10 Private Character Editor. How to Use Fonts Created in Private Character Editor.When you have finalized and saved your Character, finding and using it requires a fair amount of input. To begin, open the Windows Run tool again and enter the following command: charmap. In this tool, use the Font drop-down menu and find All Fonts (Private Characters). This will separate custom fonts you have created from the mass of preinstalled Windows Fonts.
Now simply select your font and copy it to the clipboard using the Copy option, this will allow you to paste your character into any programs on your computer that accepts fonts. (so long as they weren’t open when you created your font, if they were, you will need to restart them to continue)
Note: Photoshop doesn’t like custom fonts created using the Windows tool. Characters generally load as a square with a x in it.
How to Edit Existing Characters using Private Character Editor on Windows 10.The Network Security Key Isn’t Correct In Windows 11
If you see The network security key isn’t correct error message while trying to connect to a wireless connection on Windows 11, then this post will help you.
The network security key isn’t correct. Please try again.
While the error message clearly indicates that the error is triggered due to an incorrect network security key/password, several users have reported that they keep getting this error even when they enter the right WiFi password. The error could be caused due to an out-of-date network driver. Or, if the network driver is corrupted or faulty, you are likely to face this error.
Now, if you are experiencing The network security key isn’t correct error, this post will interest you. Here, we will be discussing several proven fixes to this error. So, use these fixes and get rid of the error.
The network security key isn’t correct in Windows 11If you keep getting the “The network security key isn’t correct” error message while setting up a wireless connection, make sure the password you have entered is correct. In case you still experience the same error message, you can use the following methods to fix it:
Update or reinstall the network adapter driver.
Generate a new password for your WiFi.
Disable and then enable your network device.
Use the Network Reset feature.
Set up a new network connection.
1] Update or reinstall the network adapter driverOne of the common reasons for this error message is an outdated or faulty network adapter driver. Hence, if the scenario is applicable, you can fix the error by updating your network drivers.
If the error is not fixed by updating the driver, you might be dealing with a corrupted installation of your network driver. In that case, you can uninstall and then reinstall the network driver using Device Manager. Here’s how:
First, press Win+X and then select Device Manager.
Now, locate the Network adapters category and expand it.
Once done, reboot your computer and check if the error is fixed or not.
If the error still appears, you can move on to the next solution to fix it.
Read: Fix Enter network credentials error on Windows.
2] Generate a new password for your WiFiThe next thing you can do to fix the issue is to create a new password for your WiFi. And then, enter the newly created password to set up your WiFi on Windows 11/10. Here’s how you can do that:
Firstly, start a web browser and open your router settings. You can enter one of the following IP addresses to access the router settings page:
192.168.0.1 192.168.1.1After that, you need to sign in with your username and password for your router to access its main settings. So, do that and navigate to the Wireless Security section.
Next, enter a new password in the respective field and then press the Save button to save changes.
Now, try entering the newly generated password as the security key for your WiFi and see if the “The network security key isn’t correct” error is resolved or not.
See: Windows can’t get the Network Settings from the router.
3] Disable and then enable your network deviceYou can try disabling and then re-enabling your network device, and then see if the error is fixed. There might be some glitch with your networking device. In that case, this workaround has been proven to be effective. So, apply it and check if it helps. Here are the steps to do that:
First, open the Settings app using the Win+I hotkey.
Now, from the context menu, choose the Enable option.
You should now be able to set up your wireless connection.
Read: The Sign-in method you’re trying to use isn’t allowed.
4] Use Network ResetUse the Network Reset feature and see if it helps.
5] Set up a new network connection Why isn’t my network security key correct?The password of a network connection is the network security key that is used to set up and connect to a WiFi network on a device. It is case-sensitive. So, make sure you have entered the exact password for your WiFi with uppercase, lowercase, numeric, and special characters. Else, the network security key will be incorrect and you won’t be able to connect to a wireless network connection.
How do I reset my network key?To reset your network key, open the router settings in a web browser and sign in with your login credentials. After that, go to the Wireless Security settings section and you can then change the password to reset your network key.
Now read: Fix Network Security Key Mismatch error on Windows.
How To Block Telemetry In Windows 7 And Protect Your Privacy
How to block telemetry in Windows 7 and protect your privacy
6
Share
X
X
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
0
readers this month.
Whether you like it or hate it, Microsoft does not explicitly tell you what kind of information it collects as part of the Windows 7 and 8.1 telemetry, though the company makes you aware of it.
More to the point, Redmond does not reveal the data included in the telemetry that its servers extract from your PC.
Fortunately, some resourceful users managed to come up with a series of quick solutions to limit Microsoft’s data collection and transfer practices.
In this article, we’re going to tell you what you can do to try to block telemetry in Windows 7 and 8.1.
However, we can’t give any assurance that Microsoft will no longer be able to gather data from your computer after you have made the recommended changes.
Remember to back up your data first before performing the procedures.
Looking for the best backup software? Here are our top picks.
How do I turn off Microsoft Telemetry in Windows 7?We’ll list the detailed instructions below.
1. Remove telemetry and diagnostic data updatesFirst off, these are the telemetry-related Windows updates:
KB971033: Description of the update for Windows Activation Technologies
KB2952664: Compatibility update for keeping Windows up-to-date in Windows 7
KB2976978: Compatibility update for keeping Windows up-to-date in Windows 8.1 and Windows 8
KB2977759: Compatibility update for Windows 7 RTM
KB2990214: Update that enables you to upgrade from Windows 7 to a later version of Windows
KB3021917: Update to Windows 7 SP1 for performance improvements
KB3022345: Update for customer experience and diagnostic telemetry
KB3035583: Update installs Get Windows 10 app in Windows 8.1 and Windows 7 SP1
KB3044374: Update that enables you to upgrade from Windows 8.1 to Windows 10
KB3068708: Update for customer experience and diagnostic telemetry
KB3075249: Update that adds telemetry points to chúng tôi in Windows 8.1 and Windows 7
KB3080149: Update for customer experience and diagnostic telemetry
KB3123862: Updated capabilities to upgrade Windows 8.1 and Windows 7
Many users believe the role of these updates is to simply snoop on them, although no clear confirmation is available yet.
Expert tip:
Repeat the command and replace the number after “kb:” with the serial number of the update that you want to get rid of. Example: wusa/uninstall/kb:KB2952664/quiet/norestart.
It is worth pointing out that you must also hide the update that you have uninstalled, otherwise Windows will restore that update once it scans your system for patches.
Should I install all Windows 7 updates? Generally, you should, but find out more from our detailed article!
2. Remove the diagnostic tracking serviceWhile the diagnostic tracking service might have already been removed from your system, it pays to be extra cautious and check for its existence.
The following commands help to see whether the telemetry service is still present in your PC. First, launch an elevated command prompt and run these commands:
sc stop Diagtrack: it stops the Diagtrack service.
sc delete Diagtrack: this command deletes the Diagtrack service.
3. Run this script to block Windows 7 telemetryIf you’re looking for a quick solution, there is a special script that you can use and run on your Windows 7 computer. This script will disable most of the telemetry tools that Microsoft installed on your device.
For more information, you can check out this GitHub page and get the script from there.
4. Disable Windows Customer Experience Improvement ProgramOne way to manually block telemetry is to disable the Windows Customer Experience Improvement Program, also known as CEIP. To disable it, do the following:
Select Customer Experience Improvement Program settings in the Related settings
Now you need to disable telemetry tasks from Task Scheduler. To do that, follow these steps:
In the right pane, disable AITAgent and ProgramDataUpdater tasks.
In the right pane, disable Consolidator, KernelCeipTask, and UsbCeip tasks.
Bear in mind that this method won’t disable all telemetry settings, but it should disable most of them.
Do you know of other methods to block telemetry in Windows 7 and 8.1? Let us know!
RELATED STORIES YOU NEED TO CHECK OUT:Was this page helpful?
x
Start a conversation
How To Merge Folders In Windows 11/10
Merge Folders in Windows 11/10 and Remove Duplicate FoldersThere are two scenarios that we need to take into consideration while merging folders. They are.
When both the folders are of different name
When both the folders have the same name
Let us look talk about them one by one.
1] When both the folders are of different nameIf you want to Merge Folders and Remove Duplicate Folders and they have the same, all you have to copy and paste. Just follow the prescribed steps to do the same.
Open File Explorer.
Go to either of the two folders.
Select all of its content, you can use the keyboard shortcut Ctrl + A.
Hit Ctrl + C to copy all the content that you selected earlier.
Now, navigate to the other folder.
If it says that you have duplicate files, either Skip them or Replace them.
Once your computer is done pasting, two folders will be merged. It’s quite easy and will take no time.
Read: Folder Merge Conflict in Windows: Enable, Disable
2] When both the folders have the same nameIf both the folders you wanted to merge have the same name, you just need to copy the folders into the same location. You will be asked to select one of the following three options.
Replace the files in the destination
Skip these files
Let me decide for each file
You should choose “Let me decide for each file” and then manually select the files you want to merge. This should do the job for you.
However, you can also use the previous method here as that will do the job for you as well, this is just a bit quicker. Also a pro-tip, if you want to merge two folders, just rename one of them and make sure both of them have the same name. Windows will automatically give you an option to merge folders.
Also Read: No Duplicate Warning when Copying or Moving Files and Folders
How do I combine folders into one?To combine two folders into one, all you have to do is copy all of the content of one folder into another. You can check the aforementioned guide to know how to do the same as we go into the details there and talked about some other methods to merge folders.
Read: How to split & merge ZIP folders on Windows
How do I merge files in Windows?Different types of files get merged differently. Hereinafter are some of the common file types along with the procedure to merge them.
Merge PDF FilesThere are various online tools that can assist you in merging two files into one. For simplicity, we have mentioned some free websites to Merge PDF files below.
You can easily use any of the aforementioned sites to merge the files. Just go to the site, select the file you want to merge, and follow the on-screen instructions to do the same.
Merge Document FilesYou can easily merge document files using MS Word. Follow the prescribed steps to do the same.
Open Microsoft Word and open a new Blank Document.
Go to the Insert tab.
Select the files you want to merge. Press and hold Ctrl to select multiple documents.
That’s how you can merge document files. You can also just copy and paste the files if they are short, this is just an easier and quicker option.
Related: Free Duplicate File Finder and Remover Software for Windows.
Merge Text files copy *.txt newfile.txtMake sure to replace newfile.txt with the name of the merged file. This will do the job for you.
Use free software to merge folders and files
WinMerge: It can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle.
Folder Merger: It is a tool to merge the contents of different folders into a single folder while keeping its folder structure.
That should do the job for you.
Read: How to combine Outlook Inbox of multiple accounts.
How To Use Emojis In Windows 11 Or Windows 10
No chat conversation is complete without colorful and interesting Emojis or Emoticons. While almost every platform and device has its own set of funny and exciting emojis, Windows users are still using the keyboard keys Colon ‘:’ and simple bracket ‘)’ to make emoticons like :), :(, :P, 😀 and a few more.
Most of the Windows 11/10 users are unaware of the fact that they can actually use funny emoticons like the middle finger, a receptionist, a dancing girl, a fairy, a Santa Claus, an angel, and so on. Yes, now that almost every Windows PC is running the latest Windows 10 operating system, you can spruce up your chat conversations, your status updates on a social networking website, your emails, or any other documents with these tiny comical characters. In this post, we will learn about how to use Emojis in Windows 11 and Windows 10.
Microsoft has refurbished its Emoji panel for Windows 11 PCs. Emojis, we all know is the best way to express your emotions and feelings. A simple and boring conversation can be made interesting with the use of correct Emojis but yeah, if not used correctly or if you are not really aware of what each Emoji actually means, it could lead to an argument too. Well, we are not here to discuss the meanings of the Emojis but to learn how to use the new set of Emojis just released by Microsoft on your Windows 11 PC.
How to get new Emojis in Windows 11Before we proceed on how to use the Emojis, let me first tell you how to get these Emojis on your PC. Many people I know are still unaware of the fact that we can actually use Emojis on our Windows PC.
To get the Emojis panel on your PC, press the Win+Period key on your keyboard. By period key, I mean the ‘full-stop’ key placed just before the question mark key on your keyboard. If you still can’t see the updated panel, you must have not downloaded and installed the latest update for Windows 11.
Press Win+I to open the Settings, go to Windows Update, and see if your PC is up to date or not. The new Emoji panel comes with an optional update.
What’s New in Emojis in Windows 11?This is how the new Emoji Panel looks in Windows 11 PCs. There are four different sections, Emojis, GIFs, Kamojis, and Symbols. To use these emojis, open any text command, like the Notepad, Email, Blogpost, a Word Document, etc, and press Win+Period keys on your keyboard. The new Emoji Panel in Windows 11 looks modern and goes well with the modern design of the latest operating system. The emojis are fluent and 2D for Windows 11 and 3D for the apps like Skype and Microsoft Teams. Microsoft has made it clear that Windows 10 PCs will not be getting these new emojis.
As you open the Emojis panel, you will first see the recently used Emojis. There is a small arrow in the right corner which takes you to a whole lot of Emojis available in the panel. It’s a long list including, emojis, faces, animals, etc.
🌺💕🎶🤷♀️🤑😭🥶🥸☠️🙉🐴🦍👅👩🏽❤️👨🏿👩👩👦👩🏻🤝👨🏻🧑🏿🤝🧑🏿
You will almost every emojis available on your Smartphones and various chatting applications.
GIFs in Emojis PanelThe second section contains the GIFs. You will find almost every popular GIF here in this section right from celebratory GIFs, smiling, laughing, applauding, or crying GIFs. There is also a search option in the top ribbon of this panel wherein you can search for the GIF for a particular reaction. Also, there are some trending categories like Happy Turkey Day, Happy Thanksgiving Day GIFs, etc. You can now use these GIFs to make your conversations interesting. Needless to say that the GIFs add a humorous touch to your emotions and reactions.
Just like the Emojis, go to the place where you want to paste the GIF, press the Win+Period key on the keyboard, and select the GIF you want. These GIFs are powered by Tenor.
KamojisKamojis are Japanese text-based emojis that include various characters. There are categories like Classic Ascii Emoticons, Happy, Sad, Greetings, and more. Same as the emojis and GIFs, simply select the emoticon you want and it gets pasted.
(●’◡’●) (❁´◡`❁) (⓿_⓿) ლ(╹◡╹ლ).
SymbolsThe last section includes the symbols like currency symbols, general punctuations, math symbols, Latin symbols, geometric symbols, supplemental symbols, and language symbols.
Search for Emojis in Windows 11There is also a Search option given in the top ribbon in the Emoji Panel. You can just type in what emoticon you are looking for and the particular section and category will be opened. So, yes this new Emoji Panel in Windows 11 is pretty quick and easy to use and also has quite a lot of options to make our conversations quirky and interesting.
How to use Emojis in Windows 10UPDATE: You can now also use the Emoji Panel in Windows 10.
To use Emojis on your Windows 10 PC, you actually have to skip your keyboard and use the on-screen touch keyboard. When we say on-screen keyboard, we are not really talking about the regular keyboard desktop app, we are talking about the touch keyboard, there is a difference.
These tiny comical characters are categorized into various categories like emoticons, facial emojis, party pops, eatables, symbols, love, automobiles and more.
Please note, that the emojis appear differently across programs. For example, they came up colorful in my FB status update but black-and-white in MS Word and Notepad. I don’t know if there is some way out to get these colorful emojis as it is.
So, finally, Windows users now have a way to use the emojis in their Windows 10 PC. The set of emojis includes almost every popular emoticon. Now you don’t need to go to the third party app or websites to copy the emoticons.
TIP: You can also make your own Emoji.
Does Windows 11 have different emojis?A new optional update for Windows 11 has started rolling out earlier this week that brings the new set of Emojis to your Windows 11 PC. The emojis are available in 2D for Windows 11 but for the apps like Skype and MS Teams, you can use them in 3D too.
How do you type emojis on Windows 11?Go to any of your text windows and press the Win+Period key (.) placed right before the question-mark key on your keyboard. Select the emoji you want to paste and you are done. Overall, the new Emoji Panel in Windows 11 is quite interesting and we love it. Would love to know your thoughts about the same.
Have fun! 🙂
Update the detailed information about Block Untrusted Fonts To Keep Your Network Safe In Windows 11/10 on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!