You are reading the article Fix Generic Usb Hub Missing Or Not Showing In Windows 11/10 updated in February 2024 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix Generic Usb Hub Missing Or Not Showing In Windows 11/10
For one reason or the other, the USB ports may stop working on your Windows 11 or Windows 10 computer, and you may notice that the Generic USB Hub device is missing or not showing in Device Manager – then this post provides the most suitable solutions affected PC users can apply to resolve the issue.What is Generic USB Hub in Device Manager?
The function of the Generic USB Hub in the Device Manager of your PC is to split a single USB port into several ports as large as four to seven different ports. With a Generic USB hub, PC users can connect your system to several devices at once. This feature saves users the stress of connecting and removing different devices. There are 3 common hub types viz;
These three hubs have different capabilities but serve the same purpose; which is to expand a single USB port so that you can connect more peripherals to your computer.Generic USB Hub missing or not showing in Device Manager
If the Generic USB Hub is missing or not showing in Device Manager in your Windows 11/10 system, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
Enable USB ports
Show Hidden Non-present devices
Update Generic USB Hub drivers
Reinstall Universal Serial Bus controllers drivers
Perform System Restore
Let’s take a look at the description of the process involved concerning each of the listed solutions.1] Enable USB ports
This solution requires you to enable USB ports via Group Policy Editor or from the UEFI or BIOS of your motherboard on your system.2] Show Hidden Non-present devices
The Generic USB Hub device can be hidden by accident, hence the issue in hand. In this case, to resolve the issue, you can make Device Manager show Hidden Non-present devices – you can do this via Command Prompt or chúng tôi GUI.
Try the next solution if the issue persists.3] Update Generic USB Hub drivers
You can manually update drivers via Device Manager (since the device is missing in Device Manager, you need to to make it show up on Device Manager first as shown in Solution 3 above) if you have already downloaded the .inf or .sys file for the driver, or you can update the driver via Command Prompt.
You can as well get the driver updates on the Optional Updates section under Windows Update or you may also download the latest version of the driver from the manufacturer’s website.
However, if the latest drivers are installed, you can rollback the driver or download and install an earlier version of the driver and see if that helps.
Related: How to manually install a Driver using a .INF File.4] Reinstall Universal Serial Bus controllers drivers
Using the WinX Menu, open Device Manager
Expand Universal Serial Bus controllers
Restart your computer
The required drivers will reinstall.
This takes care of any potential driver file corruption.5] Perform System Restore
You may be experiencing this issue due to a change that your system has gone through recently which you are totally unaware of. In this case, you can use System Restore (any changes like application installs, user preferences and anything else made after the restore point will be lost) to revert to a date where you’re certain that the Generic USB Hub was functioning normally.
To perform System Restore, do the following:
Press Windows key + R. to invoke the Run dialog.
In the Run dialog box, type rstrui and hit Enter to launch the System Restore Wizard.
At the next screen, check the box associated with Show more restore points.
Now, select a restore point prior to when you noticed the issue on your device.
At the next system startup, your older computer state will be enforced. The issue in hand should be resolved now. If not, you can reset the PC.How do I fix USB device not recognized in Windows 11?
The USB device not recognized error message occurs when the USB device has been damaged or the USB device driver has been corrupted. To fix this issue, first, restart your computer and then check if it helps. The next step is to update or reinstall your USB device driver. It is also possible that the USB port is not working. Connect your USB device to another USB port. If nothing works, your USB device has been damaged.
Hope this helps!
Related post: USB-C not working, charging or recognized.
You're reading Fix Generic Usb Hub Missing Or Not Showing In Windows 11/10
In Windows 11 or Windows 10, the Feedback Hub app lets PC users tell Microsoft about any problem while using the operating system on a device. Likewise, to help Microsoft improve the Windows experience, suggestions can be sent which is as easy as finding feedback similar to yours and upvoting it or adding your experience. This post provides the solutions if Feedback Hub is not opening or working on Windows 11/10.Feedback Hub not opening or working
If the Feedback Hub app is not opening or working on your Windows 11/10 computer, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
Run Windows Store Apps Troubleshooter
Re-register Feedback Hub app
Repair/Reset/Reinstall Feedback Hub app
Let’s take a look at the description of the process involved concerning each of the listed solutions.1] Initial checklist
Before you try the solutions below, you can do the following, and after each task see if Feedback Hub is now working normally without issues:2] Run Windows Store Apps Troubleshooter
Your first line of action to resolve the Feedback Hub app not opening or working on your Windows 11/10 computer can be to run the Windows Store Apps Troubleshooter and see if that helps.
To run Windows Store Apps Troubleshooter on your Windows 11 device, do the following:
Press Windows key + I to open Settings app.
Under the Other section, find Windows Store Apps.
Follow on-screen instructions and apply any recommended fixes.
To run the Windows Store Apps Troubleshooter on your Windows 10 PC, do the following:
Press Windows key + I to open Settings app.
Go to Update and Security.
Follow on-screen instructions and apply any recommended fixes.3] Re-register Feedback Hub app
To re-register the Feedback Hub app on your Windows 11/10 PC, do the following:
Press Windows key + X to open Power User Menu.
Tap A on the keyboard to launch PowerShell in admin/elevated mode.
In the PowerShell console, type or copy and paste in the command below and hit Enter.
After the command executes, restart your computer and on boot, try opening Feedback Hub and see if the error persists. If so, try the next solution.4] Repair/Reset/Reinstall Feedback Hub app
This solution requires you to Repair/Reset/Reinstall Feedback Hub app in that order and see if that helps. To repair or reset the Feedback Hub app, you can follow the instructions in the guide on how to Reset or Repair Microsoft Store apps via Windows Settings.
If this wasn’t helpful, you can uninstall the Feedback Hub app, then install the app via Microsoft Store.
Hope this helps!
Related post: Fix Xbox Insider Hub not working on Windows PCShould I Uninstall Feedback Hub?
In early versions of Windows 10, the Feedback Hub was strictly for members of the Windows Insider Program. But since then Microsoft has expanded this tool for use by anyone running Windows 10. Although it’s possible to uninstall this app, it’s recommended PC users keep the app on their system.How do I give feedback to Microsoft in Windows 11?
This largely depends on the app you’re using or having issues with. In Teams for Windows 11, do the following:
Open Microsoft Teams.
Select Settings and more.
Select Help. You have the option to: Suggest a feature or Give feedback.Should I disable Feedback Hub?
Feedback Hub is a Windows application that allows PC users to provide feedback, bug reports, and feature suggestions for the operating system. It is a great application in Windows operating system for troubleshooting issues. However, many users may seem not to need this feature on their system and want to disable it.
If the Windows Driver Foundation is missing or does not work properly on your Windows 11/10 computer you may experience several errors or system crashes. Some users have experienced that the keyboard and touchpad of their laptop stopped working all of a sudden. After investigating the cause of the issue, they came to know that the problem was occurring because the Windows Driver Foundation process was missing in their Windows 11/10 device. On viewing the error log in Event Viewer, they saw the “The DriverWUDFRd failed to load” error message.The DriverWUDFRd failed to load
This article covers the solutions that will help you fix the problems occurring due to the missing Windows Driver Foundation service on your Windows 11/10 computer.Windows Driver Foundation missing, failed to load or not working
One possible cause of this problem is the missing system files. Therefore, before you start trying the troubleshooting methods described below in this article, we suggest you run an SFC scan and DISM scan on your system. The System File Checker (SFC) is a utility in Windows operating system that helps users repair the corrupted system image files. The DISM (Deployment Image Servicing and Management) command also helps repair the corrupted system image files. You can run this command when the SFC command fails.
If the SFC and DISM scans do not solve your problem, go through the following fixes in order to get the issue fixed.
Update your device drivers
Uninstall and reinstall USB Controllers via the Device Manager
Add chúng tôi via Microsoft Register Server
Perform a System Restore
Repair Windows by using the Media Creation Tool
Let’s see all these solutions in detail.1] Update your device drivers
If you are getting the “The Driver WUDFRd failed” error, the issue might be with your device drivers. Hence, update your device drivers and see if it helps. You can use any of the following ways to update your device drivers.
Open your Windows 11/10 Settings and use Windows Optional Updates feature to update the device drivers.
Visit the official website of your problematic device manufacturer and download the latest version of your device driver. Now, run the installer file to install the driver manually.
Update your device driver from the Device Manager by following the steps written below:
Open the Device Manager.
Select Update driver.2] Uninstall and reinstall USB Controllers via the Device Manager
If the above method does not help you fix the issue, uninstall and reinstall the USB Controllers via the Device Manager. The steps for the same are written below:
Press the Win + X keys and select Device Manager.
When the Device Manager appears, expand the Universal Serial Bus Controllers node.
After uninstalling the driver, restart your computer.
After restarting your device, Windows will detect the hardware changes and install the missing USB Controller driver.3] Add chúng tôi via Microsoft Register Server
Another issue that the users are experiencing due to the missing Windows Driver Foundation is the missing chúng tôi One way to fix this problem is to Add chúng tôi via Microsoft Register Server. Microsoft Register Server is used to register the DLL files in Windows. You can use the regsvr32 command and see if it brings any changes.
Go through the below-written instructions:
Launch the Command Prompt as an administrator. Type the following commands and press Enter after entering each of these commands.regsvr32 /u wudfsvc.dll regsvr32 /i wudfsvc.dll
After the execution of the above commands, close the Command Prompt and restart your computer.
By default, all the system DLL files are located at the following location on a Windows computer:
If this method does not fix the missing DLL file error, you can copy the chúng tôi file from another healthy computer and paste it to the default location.4] Perform a System Restore
System Restore is a tool from Microsoft that helps users protect and repair their computers. It creates the restore points when the computer is in a healthy state. You can use these restore points to take back your computer to its previous healthy state. Restore your computer and see if it fixes the problem.5] Repair Windows using the Media Creation Tool
If none of the above solutions fixed your problem, you can use Media Creation Tool to repair your Windows computer.Where can I find Windows Driver Foundation?
Windows Driver Foundation is the former name of Windows Driver Framework. It is a service responsible for the overall stability of a system. To locate it, open the Services app on your Windows 11/10 system and then scroll down the list of services till you find the Windows Driver Foundation service.
WUDFHost is an executable file for the Windows Driver Foundation service. This executable file is located at the following path on your system:
C:WindowsSystem32What is Windows Driver Foundation (WUDFHost.exe) process?
Windows Driver Foundation is a set of libraries and tools that let you reduce the complexity while using drivers on your Windows PC. In other words, this process helps you continue using a stable system all the time. At times, users may face issues with the system, where the Windows Driver Foundation occupies a major chunk of the CPU usage. While it does not exactly restrict the functionalities of the CPU for most users, it certainly drains the battery and might cause freezing of the system at times, especially if the usage shoots up to 100%. Attempting to kill the process in the Task Manager doesn’t help because it is a system process.What is Windows Driver Frameworks (WDF)?
Windows Driver Frameworks (WDF) is a wrapper around Microsoft Windows Driver Model (WDM) interfaces. It is a set of libraries that you can use to write device drivers that run on the Windows operating system. WDF defines a single driver model that is supported by two frameworks: Kernel-Mode Driver Framework (KMDF) and User-Mode Driver Framework (UMDF).
Hope this helps.
Read next: Fix Windows Driver Foundation using high CPU.
In this article, we will talk about what you should do if USB ports are not working on your PC. USB ports on a computer allow users to connect different USB devices, like printers, keyboards, mice, etc. If the USB ports stop working, you will not be able to use any USB device. USB ports may stop working due to hardware and software issues.USB ports are not working in Windows 11/10
A USB port stops working if it is faulty or if its drivers are outdated or corrupted. Sometimes, the latest Windows Update causes issues on a computer. In addition to the hardware and software issues, a USB port may also stop working if you quickly and repeatedly insert and remove a USB device. This article provides some helpful suggestions that you can follow if your USB ports are not working.
Power Cycle your computer
Check the power output of USB ports
Run Hardware and Devices Troubleshooter
Disable Fast Startup
Scan for Hardware Changes in the Device Manager
Roll Back, or reinstall USB Controllers
Change the Power Management settings
Uninstall and reinstall the USB Root Hub
Update your chipset driver
Disable the Selective Suspend feature of Windows
Uninstall the recent Windows Update
Restore your system
Perform an In-place Upgrade
Let’s see all these fixes in detail.1] Power Cycle your computer
The first step that you should do is to power cycle your computer. The following steps will help you with that:
Turn off your PC.
Remove all the power cords. If you have a laptop, remove its battery after turning it off, and then remove all power cords.
Wait for a few minutes.
Laptop users can now insert the battery again.
Reconnect all the power cords.
Turn on your computer.
Now, check if the issue is fixed.2] Check the power output of USB ports
Most USB ports supply 5V of electricity with a maximum current of 0.5 A. If your USB ports are working, they supply power output. If a USB port is not supplying power, it may be damaged. Check the power output of your USB ports to know if they are damaged or not.
If your USB ports are not supplying power, you need to take your computer to the service center.3] Run Hardware and Devices Troubleshooter
The Hardware and Devices Troubleshooter helps Windows users fix hardware-related issues (if possible). In the previous step, if you find that your USB ports are not supplying power, run Hardware and Devices Troubleshooter before taking your laptop or desktop computer to the service center.
Fix: Generic USB Hub missing or not showing in Windows4] Disable Fast Startup
Fast Startup allows your computer to start faster than a normal startup. The Fast Startup does not completely shut down your computer. During the Fast Startup, the kernel session is not closed. Instead, it is hibernated. Windows does this by saving the kernel session and the device drivers (system information) to the hibernate file (hiberfil.sys). Due to this, sometimes, Fast Startup causes issues on a Windows computer. Check if the Fast Startup is enabled. If yes, disable it and restart your computer.
There are the following 4 ways to disable Fast Startup. You can use any of these methods.
The Control Panel
Group Policy Editor (does not work on Windows 11/10 Home edition)
Registry Editor5] Scan for Hardware Changes in the Device Manager
Some users have reported that the USB ports of their systems were delivering power but there was no connection. If this is the case with you, scan for hardware changes in the Device Manager. It will help.
Follow the steps written below:
Open the Device Manager.
The above action will help broken devices work again. Now, check if the issue is fixed.
Read: How to enable or disable CD/DVD ROM Drives, USB Drives or Ports in Windows6] Roll Back, or reinstall USB Controllers
A USB Controller manages the communication between a USB device and a computer. If the USB Controller gets corrupted, the USB ports may stop working. If the issue still persists, we suggest you roll back or reinstall the USB Controller driver.
Installing Windows Update also updates the device drivers (if an update for the same is available). If the issue started occurring after a Windows Update, it is possible that the USB Controller driver was also updated along with the Windows Update. In this case, the Roll Back option will be available in the Device Manager. Follow the steps below:
Open the Device Manager.
Expand the Universal Serial Bus controllers branch.7] Change the Power Management settings
If you are still facing the problem, changing the Power Management settings of the USB Root HUB and USB Controllers will fix the issue. The steps for the same are written below:
Open the Device Manager.
Expand the Universal Serial Bus Controllers node.
Open the properties of USB Host Controllers and go to the Power Management tab.
Uncheck the “Allow the computer to turn off this device to save power” option.
Disable this option for all USB Controllers and USB Root Hubs in the Device Manager. When this option is enabled, Windows disables the USB devices after some time of inactivity to save power. When you use that device, Windows activates that USB device again. Sometimes, Windows fails to activate the device connected to a particular USB port due to which, it seems that the USB port has stopped working.
Read: USB-C not working, charging or recognized on Windows8] Uninstall and reinstall the USB Root Hub 9] Update your chipset driver
A chipset driver tells Windows how to communicate with the motherboard and small subsystems on it. One possible cause of this issue is the corrupted chipset driver. Update your chipset driver and see if it helps.10] Disable Selective Suspend
Selective Suspend is a property by which Windows forces the connected USB device(s) to enter into a low power state. This happens when there is no bus activity on a particular USB port detected for some time. When you use your USB device, it starts working again. The purpose of Selective Suspend is to save power. If the above fixes did not resolve your issue, you need to disable the Selective Suspend feature. This action will affect all the USB host controllers and all the USB devices. After disabling Selective Suspend, all the USB devices continue to use power. Moreover, the “Allow the computer to turn off this device to save power” checkbox may be greyed out under the Power Management tab.
To disable Selective Suspend, you have to modify your Registry. Be careful while modifying the Registry, as any mistake can lead to serious errors in your system. Therefore, follow the steps explained below carefully and make sure that you modify or change the right registry key.
Before you proceed, we recommend you create a System Restore Point and backup your Registry.HKEY_LOCAL_MACHINESystemCurrentControlSetServicesUSB
Read: Free USB Repair Tools for Windows 11/10 PC.11] Uninstall the recent Windows Update
If your system’s USB ports stopped working after installing a Windows Update, you can uninstall that update. Windows 10 users can uninstall Windows Update via the Control Panel. After Windows 11 2023 Update, it is not possible to uninstall the Windows Updates via the Control Panel. Hence, you have to use the Settings app for this purpose.12] Restore your system
You can use the System Restore tool to take your system to the state before the issue started occurring. But this is only possible if a Restore Point was created. When you run the System Restore tool to restore your system, Windows shows you all the restore points created on your device along with the date. You can select any of these restore points. In your case, you have to select that restore point that was created before the issue started occurring.13] Perform an In-place Upgrade
In-place Upgrade is the process of installing the Windows operating system over the existing Windows OS without uninstalling it. Using the In-place Upgrade, you can repair your system. Though an In-place Upgrade does not erase data, it will be good if you back up your data.
Read: USB 3.0 External Hard Drive not recognized in Windows.How do I get Windows 11 to recognize my USB device?
If Windows 11 is not recognizing your USB device, the first thing that you should do is restart your computer and see if it helps. In addition, the other things that you can do to get your USB ports to work again are running Hardware and Devices Troubleshooter, disabling Fast Startup, rolling back or reinstalling the USB Controllers, updating the chipset driver, disabling the Selective Suspend feature, etc. In this article, we have explained some working solutions to fix this problem.Why do my USB ports suddenly stop working?
Quickly and repeatedly inserting and removing a USB device can make a USB port unresponsive. When a USB port is in this state, it doesn’t recognize the connected USB device due to which the USB device does not work. Other causes of this issue are the Selective Suspend feature of Windows, corrupted or outdated USB and chipset drivers, corrupted system files, damaged hardware, etc. Refer to the solutions explained in this article to know how to fix this problem.
I hope the solutions provided in this post helped you fix the issue.
Read next: Fix Generic USB Hub missing or not showing in Windows.
SD Card Not Showing up on Windows 11: How to Fix it
Several users have reported that for them their Windows 11 PC isn’t recognizing or reading the inserted SD card.
There are several factors that could be the reason behind this issue such as the presence of viruses or malware, corrupt SD card system files, outdated SD Card drivers, etc.
You can follow this guide and apply the solutions, one by one and possibly resolve the issue on your Windows 11 PC.
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
readers this month.
You insert the SD card into the built-in or external card reader only to find that your Windows 11 PC isn’t reading or recognizing it.
SD cards are your best companions when you want to store some important data, such as photos, videos, documents, etc. as a backup so that you have a copy of them if things on your PC go south.
While there are USBs and HDDs available, not everyone invests in them, as most modern-day devices, including smartphones and cameras, come with an SD card slot.
It can be frustrating when the SD card of your phone or camera, when inserted into the card reader of your Windows 11 PC, doesn’t show up and you are unable to transfer files from it.
There are multiple reasons why your Windows 11 PC is not reading the SD card. Well, that is exactly what we are going to discuss in this guide.
Here, we will list down some of the best solutions that will help you fix the Windows 11 not reading SD card issue. Let us get right into it.What are the reasons my Windows 11 PC is not reading the inserted SD card?
If you are experiencing this problem, then, for better or worse, you are not alone. There are multiple user reports on official Microsoft forums indicating that many users are facing similar issues on their Windows 11 PCs.
Just like every other Windows 11 problem, your PC not reading the inserted SD card could arise due to multiple reasons, some of which are listed below:
Your external SD card reader is not properly connected to your PC.
The external SD card is damaged.
The in-built SD card reader has damaged pins.
The SD card you are using is corrupt.
The SD card is infected by a virus or malware.
You are not using an updated device driver.
Proper drivers are missing on your PC.
The drive letter is missing from the SD card.
The Write Protection switch is not disabled.
Presence of bad sectors on your PC.
The SD card that you are using is physically damaged.
The above list includes possibly all the common reasons why you are experiencing Windows 11 not reading SD cards.
The good thing about this is that there are a bunch of solutions that we have listed in this guide that will help you possibly fix the problem at hand.How can I resolve the Windows 11 not reading SD card problem? 1. Clean SD card and re-insert
If the SD card that you have isn’t clean and contains dust or small debris, it won’t be recognized by your PC.
The reason is pretty simple, the pins of your SD card and the card reader you are using will not properly connect, thereby not establishing a proper connection.
The dust would lead to poor connection, and even if your Windows 11 PC is reading the SD card, your will experience multiple other problems.2. Try on another PC
Windows 11 not reading SD card problem could be because of the interface or support problems. If your SD card is not recognized by your PC, chances are that your PC doesn’t support the interface of the SD card.
We would suggest you try inserting or using it with another PC, and if it detects your card, then you can carry on with your tasks. Unfortunately, if this doesn’t help then you can check out the next solution.3. Download the latest drivers
Alternatively, you can also use a trusted third-party tool, called Outbyte Driver Updater. It is a one-stop solution for all your driver-related needs. The app interface is clean and easy to understand.
Other features of Outbyte Driver Updater include fixing errors related to faulty or broken driver files, updating old device drivers, locating missing drivers, etc.
⇒ Get Outbyte Driver Updater4. Change the drive letter of the SD Card
After assigning the drive letter to your SD card using the Disk Management tool, you can now check whether your unrecognized SD card is showing up on File Explorer or not.
If everything worked well, then with the set drive letter, the SD card will appear in the File Explorer along with other disk drives on your Windows 11 PC.5. Run CHKDSK to fix corrupt files
CHKDSK utility scans for any errors in the file system and automatically fixes any logical system file errors if found.
There are chances that due to a corrupt system file, the SD card isn’t recognized by your Windows 11 PC. So, to fix this, simply run the CHKDSK command and see if this fixes the issue or not.6. Ensure your card reader supports the SD card
One of the main causes that Windows 11 is not reading SD card issues pops up is because users insert an SD card that is not supported by the card reader.
High-capacity SD cards, such as SDHC or SDXC cards, require modern SD card readers that support them. Make sure that you have an SD card reader that supports the card format that you are inserting into.7. Format SD card
Once you format your SD card, it should be recognized by your Windows 11 PC. Formatting heals the corrupt sector of your SD card, which could have been causing issues.8. Disable Write Protection
Write Protection switch or feature is available on SD cards to prevent deletion of the data stored or addition of new data on it.
Usually, SD cards come with a physical Write Protection switch located on their sides. If the SD card has a button, then you should slide it to the OFF position.
In case your SD card does not come with a Write Protection switch, then you can follow the above steps and disable Write Protection for your card.9. Scan your PC for viruses or malware
You can make use of the Windows Security Defender to scan your Windows 11 PC for viruses or malware. But there are multiple third-party antivirus applications that you can install and scan your PC for viruses.
For instance, ESET internet security is one of the best antivirus software that you can use. It comes with payment protection, firewall, parental control, anti-phishing, multilayered protection, and more.
But the above steps would give you an idea of how you can perform a scan to check for any viruses or malware present on your PC.How can I avoid the SD card from getting corrupt or being undetected in Windows 11?
There is a good chance that if your SD card is worn out, or not used properly, then you will come across Windows 11 not reading SD card problem, now and then.
While you can always buy a new SD card and get on with your task, we have a few tips for you that you can apply to your existing SD cards and make them fit to be used for a long time.
Keep your SD card away from moisture or places where there is a chance that water might slip in.
Prevent exposing the SD card to extreme heat or freezing temperatures.
Ensure to keep the pins of the SD card protected. You can make use of a pouch, case, or plastic cap that usually comes with the SD card to store them.
After every data transfer session, ensure you take out the SD card properly from the card reader.
Avoid using your SD cards on a virus or malware-infected PC. Perform a quick scan often to detect viruses and fix them.
Still experiencing troubles? Fix them with this tool:
Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!
Was this page helpful?
Start a conversation
Is the Facebook lock profile option not working, showing, or available?
Facebook first introduced the ability to lock your profile in May 2023.
The feature allows users to safeguard their information on the platform.
When someone locks their profile, their information will not be shown to people who are not on their friend list.
Facebook mentioned that the feature is meant to be the successor of the “Profile Picture Guard” feature.
Ankhi Das, the public security director of Facebook India mentioned that they are aware of the concerns of people in India.
The “Lock Profile” feature gives people more control and ensures their privacy.
However, not every country has the feature.
In this guide, you’ll learn why is the Facebook lock profile option not working or showing and how to fix it.Why is the Facebook lock profile option not working?
The Facebook lock profile option is not working because it is not available everywhere right now.
According to Facebook, you can only lock your profile in certain countries.
The lock profile option was first introduced in India as a privacy feature.
As of early 2023, it’s known to be available in 7 more countries.
This includes Egypt, Iraq, Morocco, Saudi Arabia, Sudan, and Turkey.
Unfortunately, if you’re not located in one of those countries, the lock profile option will not work for you.
Hence, you need to wait until the option is released in your country.
Alternatively, you can control your privacy settings.
For example, if you don’t want people to see your posts, you can limit them by enabling “Limit Past Posts”.
By enabling “Limit Past Posts”, your posts will only be visible to your friends.Why is the Facebook lock profile option not showing?
The Facebook lock profile option is not showing because it’s not available in your country yet.
According to Facebook, the option is only available in certain countries.
The known countries are Egypt, Iraq, Morocco, Saudi Arabia, Sudan, and Turkey.
If you see a lock icon on someone’s profile, it means that they’ve chosen to lock their profile.
This will show a limited view of their profile to the public.
You can do the same by locking your own Facebook profile.
Unfortunately, if you don’t have the option, you need to wait until Facebook releases it to your country.
Otherwise, you can make use of Facebook’s other privacy options.How to fix Facebook lock profile not working
To fix the Facebook lock profile option not working, you need to wait until Facebook releases the option to your country.
Alternatively, you can make use of Facebook’s other privacy options.
As of early 2023, the ability to lock your Facebook profile is only available in certain countries.
The option is not released globally yet.
Hence, you need to wait until Facebook releases the feature globally.
Currently, it’s not known when Facebook will do this, so you need to be patient and check back for updates.
If you don’t want to wait, you can control your privacy via your privacy settings.
There are multiple privacy settings that you can enable or change.
For example, if you don’t want the public to see your posts, you can change who you share your posts, photos, and other information.
You can also turn on Profile Review, Tag Review, and Profile Picture Guard.
Profile Picture Guard will prevent users from copying, sharing, or downloading your profile picture.In which countries Facebook profile lock is available?
The Facebook profile lock is available in Egypt, Iraq, Morocco, Saudi Arabia, Sudan, and Turkey.
Only the users in those countries are able to lock their Facebook profiles.
Hence, most users do not have the ability to lock their Facebook profiles yet.
If you’re one of those users, you need to wait until the feature is launched in your country.
Currently, there is no information about when Facebook might launch it globally.Conclusion
The lock profile option on Facebook is similar to setting your Instagram account to private.
As of early 2023, it’s not known why Facebook hasn’t released the lock profile option globally yet.
You can check if you have the option by opening the Facebook app, going to your profile, and tapping on the three dots.
Unfortunately, if you’re living in a country that does not have the option, you won’t be able to lock your Facebook profile.
As mentioned in the guide, you can only wait for Facebook to release the option or make use of other privacy settings.
The “Audience and visibility” section allows you to control who can see your posts, stories, and profile.Further reading
How to Find Recently Watched Videos on Facebook
How to Change Your Background or Theme on Messenger
160+ Best, Nice, and Good Facebook Comments
Update the detailed information about Fix Generic Usb Hub Missing Or Not Showing In Windows 11/10 on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!