Trending March 2024 # Fix: ‘Ink May Have Run Out’ Error Message For Canon Printers # Suggested April 2024 # Top 6 Popular

You are reading the article Fix: ‘Ink May Have Run Out’ Error Message For Canon Printers updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Fix: ‘Ink May Have Run Out’ Error Message For Canon Printers

Fix: ‘Ink may have run out’ error message for Canon printers






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Are you getting an “Ink may have run out” error message when printing with a Canon printer? If so, that’s not entirely surprising as Canon printers report low ink levels regularly than other alternatives. The printers stop printing when the error message appears. They report low ink with the following error message:

Colour/Color CL-41/CL-51

However, the ink cartridge usually hasn’t really run out. In fact, sometimes you might be surprised with a Canon printer reporting low ink after recently adding a fresh cartridge. That’s largely due to how the Canon printers estimate their ink levels. They don’t have any way of detecting fresh ink, so instead the cartridge just monitors how many pages you’ve printed and the average page coverage. Consequently, Canon printers’ ink level estimates are usually at least a little short of the actual mark.

Press the Stop/Reset/Resume Button

The primary fix for the “Ink may have run out” error is straightforward. As the error message states, you should press and hold the Stop/Rest/Resume button on your printer for about five to 10 seconds. The specific button you need to press varies from model to model, but all the buttons have exactly the same symbol. The symbol is an upside down triangle within a circle like the one shown below.

When you press and hold the button, the ink error message will close. Then the printer will resume printing as before. So don’t press the Cancel Printing button.

Don’t Print With Remanufactured ink Cartridges

Note that remanufactured cartridges can also cause the ink error. A remanufactured ink cartridge is otherwise a recycled one refilled with ink. They also have monitoring chips that were only intended for one-time use. Thus, that monitoring chip can also throw your printer’s ink level estimates for a newly installed cartridge as it’s set to empty. As such, don’t install remanufactured ink cartridges; and print with new OEM ones instead.

Check the Ink Cartridge’s Printer Compatibility

Also consider checking the cartridge’s compatibility. To make sure your Canon printer has a compatible ink cartridge, check out this website page. There you can find compatible cartridges for Canon printers by selecting a series model number from one of the drop-down menus. Then press the Go button to open a PDF that lists compatible ink cartridges for Canon printers. Install a compatible ink cartridge if your printer currently has an incompatible one.

So you can fix this ink error with the press of a button! To ensure it doesn’t become a recurring issue, make sure your printer’s printing with compatible OEM ink cartridges. Check out this Windows Report article for further Canon printer tips.

Was this page helpful?


Start a conversation

You're reading Fix: ‘Ink May Have Run Out’ Error Message For Canon Printers

Fix Canon Printer Error 5C20 On Windows Pc

A lot of users when trying to print something or run maintenance are seeing Error Code 5C20. Users are hearing peculiar sounds when trying to do the task, and then after probing a bit they see the error code in question. If your Canon Printer is showing Error 5C20 on your computer, then try the solutions mentioned in this article to resolve the issue.

What is Canon Printer Error 5C20?

Usually, we can say that Error 5C20 is a hardware error. Your Logic board is at fault here, the rollers and the carriage are not able to move. Obviously, it is not intentional are occur because of some glitch. However, they can be resolved and we will see how.

Also, the issue can also occur because of some software glitch. There can be something wrong with the printer driver installed on your system or some files that are related to the printer that can go corrupt. There is a way by which you can resolve all of this easily and we are going to talk about this in detail hereinafter. So, without wasting any time let us hop into it.

Fix Canon Printer Error 5C20 on Windows PC

Before starting the troubleshooting, it is recommended to update the Windows. This is something that works for many of us when we stumble upon error such as the one in question. Updating the OS will also update the driver including the Printer driver, and if the issue is because of a bug, then it will resolve it for you.

If you want to fix Canon Printer’s Error 5C20, then try the following solutions to resolve the issue.

Restart your Canon Printer

Check the Print Head of your Printer

Run Printer Troubleshooter

Reinstall Printer Driver

Check the Belt

Let us talk about them in detail.

1] Restart your Canon Printer

We should start troubleshooting by restarting the Canon Printer. This is something that has worked for many users and has helped them. We are going to do that and see if that works. Follow the given steps to do the same.

Power off the Canon Printer.

Unplug the printer and wait for half a second.

Plug the printer and power it on.

Finally, try printing something or doing what you were doing when this message appeared in the first. Hopefully, it will work for you.

2] Check the Print Head of your Printer

Users seeing the error code in question has also complained that the Printer starts making peculiar rattling noises. We are going to check the Print head and see if that works. Follow the given steps to check the condition of a potential reason.

Power off your Printer.

Remove the cover panel.

Now, pull out the lever, which should be orange or grey in colour.

Remove the ink cartridges and check if there is some issue there. Even if there is no issue with the Print Head, you should still clean the area.

Finally, turn on your Printer, connect your computer and see if that helps.

3] Run Printer Troubleshooter

Windows has the feature that allows it to resolve some printer-related issues. We are going to deploy it and see if they are able it fix the problem. Following are the steps to run the Printer troubleshooter.

Windows 11

Open Settings.

Select System.

Windows 10

Open Settings.

Select Update & Security.

Wait for the process to complete and see if it helps.

4] Reinstall Printer Driver

As mentioned earlier, the Printer Driver can get corrupted. What you do is remove the driver and when you reattach it next time, your computer will directly detect and reinstall the driver. Follow the given steps to uninstall the Printer Driver.

Disconnect your computer from the Printer.

Open Device Manager.

Expand Printer queues.

Then restart your computer, reattach the printer and see if that works. If that doe not, then you need to download the Printer driver and install it.

5] Check the Belt

The belt that controls the cartridge and makes it go back and forth can cause the issue in question. If you want to find the belt, just look behind the cartridge carriage. To access it, just remove that carriage and see if it is placed correctly. Just hover your hand over the wheel and see if it is in its place. Hopefully, it will work for you.

Hopefully, these solutions will help you in resolving the Canon Printer error.

How do I reset my Canon mx920 printer?

If you think that resetting the printer will resolve the issue, then you are right. You can hold on to the power button, wait for 10-20 second, and power it back on. However, we would recommend you to check the first solution (mentioned hereinafter) to restart the printer and hopefully, it will work for you.

Also Check: 

Mixing Volcanic Ash With Meteorites May Have Jump

What is life? It’s a fuzzy concept without a single answer. If you asked a philosopher, they might quote Plato and tell you it’s the ability to support yourself and reproduce, though that would make sterile donkeys non-living objects. Ask a biologist and they’ll likely hit you with a textbook definition of life as organized matter with genes—as diverse as a paramecium and an elephant.  

Oliver Trapp, a professor of chemistry at the Ludwig Maximilian University of Munich in Germany, offers a different description. He says life is a “self-sustainable reaction network,” in which organisms have the processes necessary to survive and adapt. This is in line with the definition NASA uses when looking for extraterrestrial life. Having a clear idea of what makes up life, and the conditions needed to sustain it, helps astronomers get a better picture of what to look for when searching for life on other planets. 

Specifically, they could look for the environments that have collected the essential ingredients. Prerequisites to making life, based on what happened during early Earth, are materials for organic chemical reactions. In a new study published today in Scientific Reports, Trapp and his colleagues simulated how our planet received the supplies for life-producing chemical reactions 4.4 billion years ago. They suggest that no special or lucky conditions were necessary. Instead, life on Earth was created from volcanic particles and iron-rich meteorites. These carried the building blocks essential to living things: amino acids, lipids, nucleosides, and sugars.

[Related: Here’s how life on Earth might have formed out of thin air and water]

“Understanding the origins of biology is one of the greatest unsolved scientific questions. It has important implications for understanding how common life may be beyond Earth and for understanding humanity’s place in the universe,” says Henderson (Jim) Cleaves, a chemistry professor at Tokyo Institute of Technology and president of the International Society for the Study of the Origins of Life, who was not involved in the study.

Previous theories suggested that Earth’s volcanoes were the starting points. Lava shaped the continents, and volcanic gases helped create oceans and atmosphere. Early Earth may have had another important boost, too, in the form of chemical-rich meteors falling from the sky. 

Trapp’s new study suggests it was the iron from fallen asteroids that helped convert atmospheric carbon dioxide into organic molecules such as hydrocarbons, aldehydes, and alcohol. “The meteorites entered the dense atmosphere, heated up and then you have this ablation of nanoparticles,” he explains. The natural minerals found on volcanoes would have helped support these chemical reactions.

To determine the interplay of space rocks and Earthly eruptions, the authors simulated the conditions of our young planet in the lab. They purchased chunks of two iron and stony meteorites and dissolved them in acid to create a solution, and soaked in crushed samples of volcanic ash and minerals assumed to have been present billions of years ago. The result was a model of meteorites crash landing on volcanic islands. The team also simulated atmospheric conditions on early Earth by combining carbon dioxide gas with hydrogen gas or water under a high-pressure and high-heat system. 

[Related: A new finding raises an old question: Where and when did life begin?]

Observing the reactions in this pressurized model, the team noticed an increase in the production of aldehydes, formaldehydes, alcohol, hydrocarbons, and acetaldehyde. These organic compounds would then be used in further chemical reactions to make amino acids, lipids, DNA, and RNA molecules. “Even at lower temperatures, the particles were highly reactive and quite robust,” Trapp says. The authors suggest that as Earth’s atmosphere cooled down and became more reactive, it was probably easier for iron to speed along the conversion of carbon dioxide into oxygen-containing organic compounds. 

“It is very interesting to see a demonstration of how micrometeorites could have contributed to prebiotic organic synthesis during their infall,” notes Cleaves. While he says the work provides ample evidence for this theory of how life first emerged, he warns this simulation is dependent on the composition of the early atmosphere. It’s unclear if those conditions existed exactly how the lab simulated them, he says.

Trapp says the findings are a start to uncover what makes up life. As long as the right materials are present, the conditions to sustain living things may not be unique to Earth. This could help space explorers decide if a planet is worth exploring. For example, inactive volcanoes have already been spotted in other places like Jupiter’s moon Io and Europa—a strong contender for extraterrestrial life since it holds a liquid water ocean underneath its icy surface.  

Alternatively, these simulations could rule out otherwise promising worlds. “If a planet is cooling down too quickly and no longer able to convert carbon dioxide into organic compounds, this process would completely stop and essentially cause life to die.” Even if we do stumble on a planet with the optimal environment for life, whether we actually find aliens is another matter entirely.

Meteors May Have Brought Vitamin B To Earth

Made in Space

Karen Smith crushing meteorites with a mortar and pestle in Goddard’s Astrobiology Analytical Laboratory to prepare them for analysis. Vitamin B3 was found in all eight meteorites analyzed in the study.

Did life here begin…out there? We don’t yet know and may never. But there is compelling evidence that I might not be sitting here writing this today, or you reading it, if not for meteorite-enabled distribution of a simple vitamin billions of years ago.

Scientists funded by NASA’s Goddard Space Flight Center have found vitamin B3, a.k.a. niacin, in a group of eight ancient, carbon-rich meteorites. And the more pristine a meteorite is, the more B3 it contains.

The amount of niacin in the eight meteorites ranged from 30 to 600 parts per billion.

The finding suggests that a lot of the Earth’s initial niacin supply may have originated in space, during the cosmic events that created the Solar System, and been brought to earth by meteorites. Once here, natural processes like erosion degraded the meteorites, leeching that B3 into the environment.

Why is this a clue to the origins of life on Earth? Well, niacin, also called nicotinic acid, is a precursor to an amine called nicotinamide adenine dinuclotide (NAD). Amines are substances that are key to the formation of amino acids, which in turn are building blocks for molecular proteins. Molecular proteins are crucial to the functions that comprise living organisms, essentially the chemical bits within our cells that act upon the other, relatively inert bits.

The researchers are careful not to overstate the case, which was published this week in the journal Geochimica et Cosmochimica Acta. “It is always difficult to put a value on the connection between meteorites and the origin of life,” says lead researcher Karen Smith of Penn State, in an article on the NASA website. “For example, earlier work has shown that vitamin B3 could have been produced non-biologically on ancient Earth, but it’s possible that an added source of vitamin B3 could have been helpful.”

However, Smith and her colleagues also also found niacin isomers—related substances with the same chemical formula as niacin but with atoms attached in different formations—in the meteorites, at similar concentrations to the niacin. These variants are not used in or created by living processes, so are very unlikely to exist in the meteorites if the B3 they contain came from exposure to Earth-bound life.

5 Best Thermal Printers For Shipping Labels

5 best thermal printers for shipping labels




Working in retail (and not only) more often than not requires you to keep track of what comes in and what goes out, and at the moment there’s no better way to do that than by using thermal printers fit for creating barcodes and shipping labels.

Panduit LS8E, ROLLO Label Printer, and Zebra – ZD410 are all equally-viable choices when it comes to finding the best thermal label printer that can help you organize and keep track of your merchandise once and for all.

Note: Deals are subject to change. Keep in mind that the price tag often varies. We recommend going on the vendor’s website to check the price. Some products may be out of stock by the time you’ve made your purchasing decision. So, hurry up and hit the buy button.

Compact size and bargain price

Can create labels from Word, Excel and Google Contacts

Prints crystal-clear barcodes and graphics

Compatible with Windows 7 or later and Mac OS X v10.8 or later

Some users complain that this device jams a lot

Check price

DYMO LabelWriter 450 is one of the most accessible (money-wise) thermal printers that can help you print barcodes and shipping labels with minimum efforts.

This device is fit for a lot of activities, ranging from labeling, shipping, filing and barcode creation to effortless home and office organization.

Compatible with Windows (XP or newer), and Mac (10.9 or newer)

Features overheating protection

150mm/s high-speed printing speed

Comes with a compact design

Some users complain about frequent jamming

Check price

This device is compatible with Amazon, eBay, FedEx, Shopify, UPS, Etsy and USPS, and other similar popular services.

It also features a built-in label identifier, which only requires you to insert the label so that the device can fetch it and feed it to the printer.

High speed printing at 150mm/s

Compatible with any Thermal Direct Labels

Compatible with Windows (XP and newer), and Mac (10.9 and newer)

Compact design

Not enough instructions for certain situations or issues

Check price

ROLLO Label Printer is a thermal printer that can be safely used for creating labels and barcodes and generally for keeping track of your merchandise or inventory through means of labeling your possessions in a seamless manner.

Expert tip:

More so, it can print at a speed of 150mm/s, so you don’t have to wait around a lot for labels to be printed.

Can be used wirelessly

Max print speed of 6 in/sec

Compact design

Easy to use

Customers complain that it’s difficult to set up

Check price

Zebra – ZD410 is a direct thermal desktop printer that can generate labels, barcodes, receipts, tags, and even wrist bands, without the slightest effort.

This device can be connected via USB, BTLE or USB host, depending on your needs.

Its software counterpart, ZEBRA DESIGNER, allows you to use premade labels and barcode templates, but you can also use it to create your own.

Many formatting options

Sign & label printing software

Labels are printed quickly

Includes a built-in cutter

Consumables for the unit can be expensive

Check price

Panduit LS8E is a complete kit that can help you solve your organizing issues by letting you print labels and barcodes quickly and without requiring either ink or toner; printing is done via heated printing pins on heat-sensitive paper.

The kit includes the actual device, but also one pack of self-laminated labels, a case, a quick reference card, the operator’s manual and various other accessories.

If you manage your own small business, run a shop, or just need a way to quickly and effectively keep track of your office or home inventory, you might want to consider turning to thermal printers for label and barcode creation.

Zebra – ZD410, ROLLO Label Printer and DYMO LabelWriter 450 are some of the best thermal printers that can help you with the tasks mentioned above in a seamless manner.

Still experiencing issues?

Was this page helpful?


Start a conversation

Rural America May Miss Out On Early Covid

Coke County, Texas, a rural area with a population of less than 3,500 people, didn’t report its first case of COVID-19 until early May. Now, it ranks second in the state in infection rates. Yet when Texas began distributing coronavirus vaccines this week, Coke County didn’t get any. Not a single rural county in Texas did.

Texas isn’t an outlier. Many rural areas haven’t seen COVID-19 vaccines yet, and rural health officials worry that states won’t send them their fair share any time soon. There are significant challenges in distributing vaccines to rural areas, but some states’ preliminary plans for vaccine distribution didn’t even mention these communities at all. “We understand there’s not enough vaccine to go around and that those are hard decisions,” says John Henderson, the CEO and President of the Texas Organization of Rural & Community Hospitals. “But any distribution plan that excludes rural is a mistake.”

One of the challenges facing less densely populated regions is that the Pfizer/BioNTech vaccine—the only one that is currently available—requires ultra cold storage at minus 70 degrees Celsius. Most rural hospitals don’t have specialty freezers that can maintain this temperature. Some urban hospitals have bought extra freezers to hold more vaccines, but their rural counterparts often can’t afford to buy one to begin with. When they can, it may not make a difference. Several rural Texas hospitals bought the specialty freezers in the hopes that it would increase their chances of making it onto the state’s distribution list, but they were excluded this week regardless.

In reality, though, freezers likely won’t be the reason these more remote outposts don’t get vaccines. The doses can be stored in their shipping container with dry ice for 15 days, then five days in a normal refrigerator before spoiling. “Nobody’s going to wait two weeks to give the vaccine,” Henderson says, so a lack of freezers should not prevent rural hospitals from getting the Pfizer vaccine.

A bigger issue is that rural hospitals are often small with few employees, but Pfizer sends its packages in trays with 975 doses. Henderson suspects that Texas didn’t consider sending doses to any hospitals with less than that number of frontline workers, which automatically ruled out almost all of those in rural counties. However, small size doesn’t have to exclude rural hospitals, Henderson says—neighboring rural counties could easily team up to split those doses.

Other states have come up with a more centralized approach to break up the large packages. Wisconsin is using a so-called hub and spoke model. Boxes go to a few large hospital hubs, and those hubs ship the required doses to smaller urban and rural clinics. “If Pfizer had been more flexible about sending their product in smaller doses, that would reduce the complexity of the work of people sorting at the hubs,” says Tim Size, the Executive Director of the Rural Wisconsin Health Cooperative. Still, the hub and spoke approach lets rural hospitals get the vaccines they need.

The easiest solution to the issues rural communities are facing may be to wait. Experts expect the Food and Drug Administration will grant Moderna’s vaccine emergency authorization by the end of the week. Their product can be stored at regular freezer temperatures and comes in packages of 100 doses, which is much more compatible with rural healthcare. The Texas Department of State Health Services said that when the Moderna vaccine becomes available, they will make the distribution plan more inclusive of rural areas.

Still, some frontline workers may not be able to get vaccinated at their own remote health clinics because they’re too small to warrant a shipment.”We literally have clinics in communities where there’s only one provider of any type in their area,” says Bill Finerfrock, the Executive Director of the National Association of Rural Health Clinics. These providers will have to travel, in some cases for hours, to more populated regions to get vaccinated.

Months from now, when the general population can start getting the shot, rural clinics may have trouble vaccinating everyone in their community—especially clinics with a solo provider who still needs to provide care for sick patients. “If they are full-time trying to do vaccine integration, that means they’re not able to see patients for the things that would normally be coming into the clinic with,” Finerfrock says. Some clinics are asking providers to come out of retirement or are reaching out to educational institutions for volunteers to help vaccinate their patients.

Although rural clinics anticipate challenges meeting demand for the vaccine, a lack of demand might be just as big of a problem. More rural Americans are hesitant about getting the COVID-19 vaccine—35 percent say they probably or definitely won’t get the shot compared to 27 percent of the general public, according to a recent survey from the Kaiser Family Foundation. “Given how politicized masking was, there’s some good evidence that’s spilling over into how many people are willing to trust science, to trust the manufacturers, to trust the federal and state government around the vaccine,” Size says.

Even some healthcare workers are reluctant. In the far west and north of Texas, “a significant number of frontline clinical staff have said that they’re going to pass,” Henderson says. However, most people he hears from are eager to get the vaccine as quickly as possible. “That’s good,” he says, “because the vaccine is our way out of this thing.”

Update the detailed information about Fix: ‘Ink May Have Run Out’ Error Message For Canon Printers on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!