Trending March 2024 # How To Build A Simple One Horse Barn: 12 Steps (With Pictures) # Suggested April 2024 # Top 4 Popular

You are reading the article How To Build A Simple One Horse Barn: 12 Steps (With Pictures) updated in March 2024 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Build A Simple One Horse Barn: 12 Steps (With Pictures)

Understand that building a pole barn is straight forward and pretty much as simple as it gets. It is built with poles that are 4 x 4-inches (10.16 x 10.16 cm). These protected posts, or utility poles, are set in a grid 8 feet (2.44 meters) apart.

The barn, depending on your location, can be enclosed on 3 sides (or with half of the front covered).

Another choice is to open it on the side, facing the sun in winter. This way you will have prevailing winds for summer cooling of the horse.

Make the roof from fiberglass or sheet metal. Both of these come in varying lengths and are 26 inches (10.14 cm) wide. The wall cladding is the same material used for the roof.

Advertisement

Start building the pole barn by laying out the location of the posts on the ground that drains well and is relatively flat. Make sure you keep the posts square to each other when you lay out the post locations. Remember, it is in 8-foot (2.44 meter) grids. You will need 6 post locations for an 8 x 16-foot (2.44 x 4.88-meter) shed.

Set the treated 4 x 4-inch (10.16 X 10.16 cm) wood posts into place, bracing them to keep them plumb. Pour a premixed sack of concrete into the hole around the post, up at least 1 foot (. 3 meters). Wait a couple of days for the concrete to set and then backfill the remainder of the way with dirt dug from the holes.

Tamp down the dirt as you backfill. Keep checking as you go to ensure your post is square. Use a string line run on the back and front to keep the center post in-line.

Use 2 x 4-inch (5.08 x 10.16 cm) wood grits, or lattice board, 2 feet (.61 meters) apart from the bottom of the skirt board to the top of the wall on 3 sides.

Opt for 2 x 6-inch (5.08 x 15.24 cm) treated wood board all around the outside of the pole barn for the roof frame to sit on the top grit.

Set the stringer top edge (on the side wall section) 6 feet (1.83 meters) from the ground. Now raise the front end up to the 8-foot (2.44 meters) mark on the front.

Cut the post off flush with the roof stringers.

Add another 2 x 4-inch (5.08 x 10.16 cm) grit on the side level with the one you placed against the bottom of the stringer at the back.

Fasten metal hurricane hold-down straps to the posts and to the rafters to prevent high wind gusts from pulling the roof off of the support posts.

The holes are pre-drilled and use special #12 2-inch (2.12 cm) metallic steel hex drill-point roofing screws.

Cut to fit using a circular saw fitted with a metal cutoff blade on the sloped sides.

Finish with preformed foam sealer strips that fit between the roofing and joist. Add doors to the front, if needed, by building a 2 x 4-foot (.61 x 1.22-meter) frame. Use the same sheet metal as the roof and walls, and hang it from the post.

Advertisement

You're reading How To Build A Simple One Horse Barn: 12 Steps (With Pictures)

How To Date An Aries Female: 12 Steps (With Pictures)

Aries is a male cardinal sign – ruled by the planet Mars, the symbol of war.[1] You are dealing with a fearless leader. She is a woman who refuses to play by the usual female rules. She doesn’t care what people think, and she won’t be a stickler for tradition. She won’t behave like those other girly submissive women! Because she’s ruled by a male sign, it really is essential when dating that she make the first move.

An Aries woman will let you know right off the bat if she’s attracted to you sexually, whether with her words or body language. Aries in general are unskilled at keeping secrets, no matter how hard they try. It’s likely that if an Aries woman likes you, you’ll know. You may sometimes come across an Aries woman who seems shy; open up to her and she will unfold before you.

Don’t be shy when asking for a date. When approaching her for a date, be confident, make eye contact, and smile. Aries women tend to be unorthodox in their interests, so don’t be shy. Come right out and suggest rock climbing, or roller skating, or sneaking unseen into the movies. And listen when she makes her own suggestions, which are bound to lead you to unexpected places!

Advertisement

Talk about your future aspirations. Aries women are very loyal friends and companions, and if they think your goals are worthwhile, they love to help out, if they can.

Nurture a strong element of friendship and spontaneity when you are together, and keep things fun and interesting by trying new things together, working on something together, or engaging in friendly competition. Stifle any jealous tendencies you may have, because if you try to come between her and her friends, your relationship will be over before it begins. Aries women don’t have time for those who try to order her around.

These women are very sentimental and sensitive, even if they appear rude. Understand their complicated emotions that are tied and mixed up in their minds. These women are far from cold if that is what you think about them; it is due to the fact they take time to accept changes. In fact, these women are warmhearted, extremely loyal, and affectionate.

Know that Aries women are supportive. If she is initially approached correctly, she can be very friendly, helpful and loyal. At some point of time she might be the only person you could turn to in all situations. She is someone whom you could totally depend on and rely on even in the worst possible times of your life. She might be the only person you might think of in such situations that will not let you down. The Aries will always defend the underdog, with heroic courage. There need be no others on her side. She’ll fearlessly tell anyone what she really thinks – and this includes gun-wielding maniacs. She will also be the person who will feel your pain and share your happiness. Aries empathize with and actively support those who are struggling to survive, but they have little time for whiners, complainers and unjustified depressives.

Never underestimate her in any way, and certainly never to her face. She is made up of strong substance. She is stronger than you, and if you need her, just call her; she will come. She will not give up easily and she will only relax when she has achieved what she had set her mind on. Don’t doubt her or take away her liberty and freedom, and she will respect your trust and faith in her and will remain loyal and confident in you. She will do nothing that might harm the confidence you have in her.

Never take this woman for granted. She will not like it, and will rebel against you. She must get the respect she deserves. Make her feel special. Make her feel the importance she has in your life. Cook her favorite meals if you can. Sing or send her songs or write romantic love letters. Poems are also not a bad idea. Try to make her feel special and you will always have her. Above all, fight for her, especially when she is at her weakest, and you will never lose her.

Know how an Aries woman will behave. She will appreciate everything that you have done for her, and will do anything to maintain the love and trust in a relationship she decides to pursue. An Aries woman is a woman of actions. She also sticks to what she says and does not change irrespective of time or season. She might exhibit small amounts of anger, but don’t take this seriously, as it may be due to her professional life – she is very driven. It could also be a natural sign of frustration, because she is missing something or someone in her life. Instead, show her love and affection, and most of all, friendship at this time, and she will always remain loyal and grateful.

Know that you may not end up “caring” for her. Very few can be trusted to care for an Aries woman. Perhaps it’s a Leo male who takes her into his pride. Maybe she’ll fall for some deep Scorpio eyes (yes, Scorpio can get the better of Aries). But be sure that even if your Aries woman is bossy by day, she may be submissive at night. Are you really strong enough, confident enough to handle this fiery and fearless female? Here’s a hint: if you have to ask her to let you be the boss for a while, it means she is the dominant one.

Advertisement

How To Build A Simple Calculator App – Full Tutorial With Code

Much like developing any non-trivial program, there is more than one way to do it, and if you get ten different programmers, you might get ten different ways of writing a calculator (unless they all happen to be Android Authority readers *wink*). The complete source for the calculator app written below is available on github for use, reuse and modification as much as you like.

Creating the project

For our sample calculator, we will setup our project to use data binding. Using data binding in this app simply helps us refer to our widgets (Buttons, EditText and TextView) directly, rather than finding them with findViewById() methods. To enable data binding, you must add the following line to your app build.gradle file.

Code

android { ... dataBinding.enabled = true

To enable data binding in our activity_main.xml file requires one last change. Wrap the generated root tag (in our case it was a RelativeLayout) within a layout tag, making the layout tag the new root tag.

...

Code

public class MainActivity extends AppCompatActivity { private ActivityMainBinding binding; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); binding = DataBindingUtil.setContentView(this, R.layout.activity_main); } } Understanding the layout widgets

There are four main items in our calculator app. These are:

RelativeLayout – this item governs how the other items are laid out, or displayed on the screen. The RelativeLayout is used to position child elements in relation to each other, or to itself.

TextView – this item is used to display text. Users are not expected to interact with this item. The result of computations are displayed using a TextView.

android:id="@+id/activity_main" android:layout_width="match_parent" android:layout_height="match_parent" android:paddingBottom="@dimen/activity_vertical_margin" android:paddingLeft="@dimen/activity_horizontal_margin" android:paddingRight="@dimen/activity_horizontal_margin" android:paddingTop="@dimen/activity_vertical_margin" <TextView android:id="@+id/infoTextView" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginBottom="30dp" <EditText android:id="@+id/editText" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_below="@id/infoTextView" android:enabled="false" android:gravity="bottom" android:lines="2" android:maxLines="2" <Button android:id="@+id/buttonSeven" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_below="@id/editText" android:text="7" <Button android:id="@+id/buttonEight" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_below="@id/editText" android:layout_toRightOf="@id/buttonSeven" android:text="8" <Button android:id="@+id/buttonNine" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_below="@id/editText" android:layout_toRightOf="@id/buttonEight" android:text="9" ... ... <Button android:id="@+id/buttonDot" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_below="@id/buttonOne" android:text="." <Button android:id="@+id/buttonZero" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignRight="@id/buttonEight" android:layout_below="@id/buttonTwo" android:text="0" <Button android:id="@+id/buttonEqual" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignRight="@id/buttonNine" android:layout_below="@id/buttonThree" android:text="=" <Button android:id="@+id/buttonDivide" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignTop="@id/buttonNine" android:layout_toRightOf="@id/buttonNine" android:text="/" <Button android:id="@+id/buttonMultiply" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignTop="@id/buttonSix" android:layout_toRightOf="@id/buttonSix" android:text="*" <Button android:id="@+id/buttonSubtract" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignTop="@id/buttonThree" android:layout_toRightOf="@id/buttonThree" android:text="-" <Button android:id="@+id/buttonAdd" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignTop="@id/buttonEqual" android:layout_toRightOf="@id/buttonEqual" android:text="+" <Button android:id="@+id/buttonClear" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignRight="@id/buttonAdd" android:layout_below="@id/buttonAdd" android:layout_marginTop="@dimen/activity_vertical_margin" android:text="C"

Our calculator has two values, valueOne and valueTwo. These values hold the numbers to be operated on. Both values are of type double, so they can hold numbers with and without decimals. We set valueOne to the special Double value NaN (not a number) for reasons that will be clearer below.

Code

private double valueOne = Double.NaN; private double valueTwo;

This simple calculator can only perform operations of either addition, subtraction, multiplication or division. So we define four static chars to represent these operations, and a CURRENT_ACTION variable, which holds the next operation we intend to perform.

Code

private static final char ADDITION = '+'; private static final char SUBTRACTION = '-'; private static final char MULTIPLICATION = '*'; private static final char DIVISION = '/'; private char CURRENT_ACTION;

Finally, we use the DecimalFormat class to format the output of our calculator. The decimal format constructor permits displaying up to ten decimal places.

@Override binding.editText.setText(binding.editText.getText() + "0"); }

Code

private void computeCalculation() { if(!Double.isNaN(valueOne)) { valueTwo = Double.parseDouble(binding.editText.getText().toString()); binding.editText.setText(null); if(CURRENT_ACTION == ADDITION) valueOne = this.valueOne + valueTwo; else if(CURRENT_ACTION == SUBTRACTION) valueOne = this.valueOne - valueTwo; else if(CURRENT_ACTION == MULTIPLICATION) valueOne = this.valueOne * valueTwo; else if(CURRENT_ACTION == DIVISION) valueOne = this.valueOne / valueTwo; } else { try { valueOne = Double.parseDouble(binding.editText.getText().toString()); } catch (Exception e){} } }

For every operator, we call computeCalculation() first, then set CURRENT_ACTION to the selected operator, while for the equals ‘=’ operator, we call computeCalculation(), then clear the contents of both valueOne and CURRENT_ACTION.

@Override computeCalculation(); CURRENT_ACTION = ADDITION; binding.infoTextView.setText(decimalFormat.format(valueOne) + "+"); binding.editText.setText(null); } }); @Override computeCalculation(); CURRENT_ACTION = SUBTRACTION; binding.infoTextView.setText(decimalFormat.format(valueOne) + "-"); binding.editText.setText(null); } }); @Override computeCalculation(); CURRENT_ACTION = MULTIPLICATION; binding.infoTextView.setText(decimalFormat.format(valueOne) + "*"); binding.editText.setText(null); } }); @Override computeCalculation(); CURRENT_ACTION = DIVISION; binding.infoTextView.setText(decimalFormat.format(valueOne) + "/"); binding.editText.setText(null); } }); @Override computeCalculation(); binding.infoTextView.setText(binding.infoTextView.getText().toString() + decimalFormat.format(valueTwo) + " = " + decimalFormat.format(valueOne)); valueOne = Double.NaN; CURRENT_ACTION = '0'; } });

Congratulations! You have completed your simple calculator Android app.

Finally

How To Build A Yu Gi Oh! Deck That Suits You: 12 Steps

Decide your playing style. This is important, as it determines how people would look at you as a duelist. Are you a rash duelist who would rapidly summon, attack and activate cards? Or are you the deep thinker who would analyze your hand and field before making a move? Or maybe the duelist that would remove cards from play so your opponent cannot use them again? Considering these would help you choose a deck archetype.

The best decks focus around an archetype – a group of cards with similar names and mechanics who support each other. Decks focusing around an attribute or type aren’t very good. Neither are most decks with multiple archetypes, though some mesh well.

There are many different archetypes, and each has many different styles of being used. For example, the main strategy of a Monarch deck is to keep tribute summoning more powerful monsters, and to activate effects while doing so, but that is only one of the archetypes. There are many more to discover.

Advertisement

Choose your monsters. Each deck should have around 12-18 monsters, but the number will vary depending on the deck you play. Use low-level effect monsters that support your archetype and have helpful effects in your deck. Most decks do not use normal monsters, since they do nothing on their own, but they have some good support and are included in decks built around them.

LV 1-4: Around 12

LV 5-6: Around 2

LV 7s and higher: Never more than 2, depending on the deck. Some decks can and need to be all high-level monsters. These decks are usually able to summon their monsters some other way than tributing. For example, decks like Malefics and Infernoids can special summon all of their high level monsters. For many other decks, especially ones that rely on the extra deck, it is not recommended to include any high level monsters that you can’t special summon.

Choose your spells. Most decks will have around 12-15 spells. Around 1/3 of these spells should be for monster support/combos. The rest would be attributed to favorites and staples. Add them into your list once you’ve decided. Make sure you have good spells for S/T destruction, monster protection, and monster destruction.

If you’re running a high monster count, such as in Dragon Rulers or Mermails, 3-6 traps should be enough. Some decks run no traps, and do fine. A good choice for a deck that relies solely on monsters would be Royal Decree.

Fill out your Extra Deck. Most decks can use Xyz monsters. If your deck includes at least 3 easily summoned monsters of a certain level, you can add a couple of Xyz monsters of that Rank. Synchro and Fusion monsters are more specialized – Synchro monsters can be added if you have at least one tuner, and Fusion monsters are only used in specialized decks built around them.

Lay out your cards and make sure that they work together well. It’s no use if you have cards that do not work together well. List the cards that you need to improve your deck and make it your business to buy those cards. Watch the cards your common opponents play. Also add some generic cards in your side deck that you can use later on, in between duels. Try looking up your deck type online to get tips or ideas from other people’s decks.

Buy cards. Now that you have planned out the deck you want, you can go out and get the cards you will need for it. Structure decks and Starter decks are good ways to start off. They are pre-built, and contain cards that fit together and good support, but could take some improvement. Booster packs have a variety of random cards, which won’t necessarily work with your deck, but you could get some really good cards. You can also trade with friends and people at your local card shops, or buy singles online. If you are looking for a specific card, it will always be easier and cheaper to buy it individually rather than go hunting in booster packs for it.

Start playing with your deck. Play against friends and local players to learn the strengths and weaknesses of your deck. After a few games, you will have a better idea of how your deck runs, and may need to take out some cards that don’t work for you. No deck is perfect, so you will always be modifying and improving your deck.

Remember to never use forbidden cards in tournaments. You could use them when dueling with a friend but he/she might not accept the offer.

Update your deck! Wait for the newest booster packs to release and if the new cards suit your needs, buy a couple of packs to test your luck. Also, research older cards that will be good in your deck.

Advertisement

How To Tell If A Hard Drive Is Bad: 9 Steps (With Pictures)

Find out when it’s going to fail before it fails. That’s not always possible, and sometimes a hard drive will just die—but it’s still important to keep an eye on the symptoms of an imminent hard drive so you have the chance to back-up your data and get professional help. Hard drives are incredibly sensitive bits of hardware, so don’t try to crack it open and have a look inside unless you know what you’re doing. And most definitely ensure that if you do crack it open, the platters don’t get exposed to the open air—hard drives can only be opened in Class 100 clean rooms or they’re pretty much instantly destroyed by dust. It’s a lot easier (and cheaper) to back-up than to get your data recovered. Once you detect any of the signs of failure you need to ensure that you have a back-up and if not, make one. Then when the drive dies, you can claim your warranty if you still have it, or buy a new drive, and be on your way. Recovery can cost thousands and thousands of dollars, with no guarantee the data will all be recovered; it sure is a ridiculous amount to pay, but there’s not much you can do but shop around and find the best price. The cost of transferring a back-up onto a brand new drive is much cheaper than having a recovery specialist do the same for you.

Listen for strange noises: Sometimes hearing strange grinding and thrashing noises means your drive is beyond repair—for instance, if you’ve had a head crash, it very often is. Or it could just be that the motor has failed or your hard drive is grinding away because of noisy bearings. If you’re hearing strange noises then act very quickly—you probably don’t have much time.

Advertisement

Watch for disappearing data and disk errors: Your computer won’t let you save a document? Or you’re sure that you had a file on your desktop yesterday that’s nowhere to be seen today? Programs that always worked suddenly stop working, asking where a file it depends on is stored? These are all potential signs that your hard drive is on its way out. Of course, it could be that your kids moved your files for fun or a virus is eating through them, but disappearing data is never a good sign for your drive if you can rule out those alternative causes.

Your computer stops recognizing your drive: This may seem obvious, but if your computer no longer recognizes your drive chances are there’s a problem with it, not the computer. Test it in a friend’s computer and see if your hard drive is recognized by it. Often, this will be a logical failure—unless you can hear strange noises that indicate a severe mechanical or head problem.

Computer Crashes: Does your computer regularly blue-screen or suddenly reboot? Does it crash often, especially when booting your operating system? If your computer is crashing, especially at times when the computers is accessing files (such as during the boot sequence), it may indicate a problem with your drive.

Really Slow Access Times: It shouldn’t take half an hour to open a folder in Windows Explorer, or two hours to empty the trash. People have come across this problem plenty of times over the years, and it’s always followed by a failing hard drive within a month or two.

If your computer crashes or can’t find a file that was there not long ago it can mean that your hard-drive is on its way out, but it could also be that there is a simple file-system error in the disks’ formatting. These types of error can usually (but not always) be fixed by using the chkdsk function that comes as standard in nearly all Windows installations. To correct a file-system error on drive C:, open a command-prompt while running your computer as an administrator if necessary – if using Windows Vista or later – and type “chkdsk C: /f”. (If you want chkdsk to check for data file errors too you can add another parameter: “chkdsk C: /f /r”.)

Advertisement

How To Do A Backbend (With Pictures)

Article Summary

X

Doing a backbend is a great way to get a deep stretch in your back, but it takes some time and effort to work up to this graceful pose. Before you start, warm up your muscles for a few minutes by doing some light cardio, such as jogging or jumping jacks. Next, do some gentle stretches, making sure to focus on your wrists, ankles, and back. One of the easiest ways to get into a backbend position is to do a bridge. Lie down on your back with your feet on the floor and your knees bent. Place your hands next to your head on either side with your palms flat on the floor. Your fingers should face your shoulders and your elbows should be sticking straight up towards the ceiling. Then, push up through your shoulders to lift your torso off the ground. You might not be able to get very far off the ground at first, but that’s okay. It will get easier with practice. You can also build up to it by just lifting your hips off the floor at first. As you get stronger, move to doing a full-body bridge. Another way to ease into a full back bend is by practicing the bend against a wall. Stand 1 or 2 steps away from a wall, with your back to the wall and your feet shoulder-width apart. Put your palms on your butt and push your hips forward to bend your back. Then, stretch your arms over your head with your palms facing back and lean backwards until you can put your hands on the wall. Walk your hands down the wall as far as you can, breathing deeply and evenly the whole time. Once you’ve reached your comfortable limit, walk your arms back up the wall and slowly straighten up from the hips. Then, gently bend forward and touch your toes to stretch out your back. Keep repeating your wall backbend, getting a little further from the wall each time. Eventually, you should be able to drop into a full backbend without using a wall—but you might want to ask a friend to support you while you do it. Have them put one hand on your lower back and one on your stomach as you go into a backbend from a standing position. Push your hips forward, tilt your chin up, then reach your hands up and back behind your head. Bend backwards until your palms are resting on the floor. Ask your spotter to boost you back up again by placing both hands on your upper back. Keep practicing until you feel ready to do it on your own. To get back up from a back bend, start by gently rocking back and forth on your hands and feet. Tuck your chin against your chest, then thrust up and forward with your chest and rock onto your feet. Carefully push yourself up into a standing position with your hands. You can also get out of the bend by gently lowering yourself toward the ground. As you’re doing a backbend, remember to keep breathing and listen to your body. Always stop if you feel pain—a backbend shouldn’t hurt. For tips on how to stand back up from your back bend, read on!

Did this summary help you?

Update the detailed information about How To Build A Simple One Horse Barn: 12 Steps (With Pictures) on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!