You are reading the article How To Dual Boot Windows 10 And Ubuntu updated in March 2024 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Dual Boot Windows 10 And Ubuntu
Many people want to dual boot Windows 10, especially the latest version with alternative operating systems such as Ubuntu. However, dual booting, partitioning and configuring multiple operating systems can be difficult. That’s why we’ve decided to make this guide: a complete tutorial on how to dual boot Windows 10 and Ubuntu.
Note: this tutorial assumes that you have a computer already running Windows 10 and that you want to install Ubuntu alongside Windows 10.Windows 10 Anniversary Update
Windows 10 anniversary is an update that commemorates the release of Windows 10. Installing it doesn’t require any extra steps. Just make sure that updates are enabled. With updates enabled, Windows will automatically download these new updates and install them to the system.Making the USB disk
Ubuntu must be put on a USB disk (or DVD). Putting Ubuntu on a USB drive is easy and just requires downloading some software. Start off by heading to this website and downloading Etcher. Etcher is a cross-platform USB and SD card-imaging program that is easy to use and perfect for this kind of thing.
After a bit of time, Etcher will say that the process is finished. Keep the USB drive in, and reboot into your PC’s BIOS to configure it to load the newly-created flash drive.BIOS
In order for Ubuntu to load the live USB disc, some things need to be done. First, find out what key is needed to load your computer’s BIOS (some are Del, some are F2). As each computer is vastly different, the keys to do this vary. That’s why it is best to do a Google search and figure out this information on your own.
Once in the BIOS, look for (and disable) secure boot if present in the BIOS and save the settings. Then, with secure boot disabled, find the boot order settings and change it so that the PC will try to boot from the Ubuntu USB stick before anything else.
Note: if your PC does not support USB in the BIOS, you will need to either update it or burn Ubuntu to a DVD.Installing Ubuntu
What follows is a process in which Ubuntu asks the user to enter a timezone, username, and password. With all that information entered, the installation will begin. This will take some time. When it is completed, a message will appear letting the user know that the installation is complete.
When you reboot, you’ll be able to select from either Ubuntu or Windows 10 AU by using the up and down keys on the keyboard and pressing the enter key to select.Conclusion
Derrik Diener is a freelance technology blogger.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
You're reading How To Dual Boot Windows 10 And Ubuntu
If you use any of the programs listed below, you will want to have a version of Windows running on your computer even if you prefer and use Linux for other functions. This article will help you dual boot Linux Mint and Windows on one PC.
Table of ContentsWindows vs Linux Programs
Not all Windows and apps run on Linux such as:
Final Cut Pro
In some instances, Linux offers a workaround called Wine (Windows emulator). However, it is often unreliable, buggy, and doesn’t always work.
Game developers can choose to use Linux or Windows. 90% of game buyers prefer to use Windows because there are more games developed for Windows.Windows 7 vs Windows 10
Upgrading to the latest version of the Windows OS might seem obvious. However, there are many differences between Windows 7 and Windows 10 that might cause you to want to have both installed on your computer.Windows Media Center (WMC)
Users of Windows 7 enjoy the Windows Media Center. Microsoft did release an updated version of WMC but is not included in Windows 10.Gaming and Compatibility
Popular applications such as Google Chrome, Stream, Photoshop, and other mainstream apps will continue to work correctly in Windows 10.
However, there are some programs, proprietary in-house software, and third-party apps that work better on Windows 7, including software for point-of-sale management and printing mailing labels.Multiple Operating Systems on Your Computer
Although most computers come with one operating system, you can install more than one OS on a single machine. Switch between different operating systems when you boot your computer and select the one you want to use from the menu provided.
The only restriction you have in how many systems you boot on your computer is the amount of storage space available, and the time it will take you to set it up.
This process is called multi-booting. When you install two OSs, it’s called dual-booting and this is described below.How To Set Up a Dual-Boot System
Before you get started:
Back up your data to an external drive in case something goes wrong
Make sure you have a recovery of the live disk for Windows
In case your boot fails, have a boot repair disk availableInstall Windows First
Windows doesn’t have a boot menu and does not look for other operating systems on your computer before loading. When installed, Windows will overwrite any boot sequence you might already have installed.
On the other hand, Linux Mint will first look to see if you have other operating systems loaded on your computer. It will build a menu where you can choose which system you want to boot.
The following steps will show you how to dual boot Linux Mint where Windows has already been installed.Create a Bootable Drive For Linux
First, download the Linux ISO (disk image) from the website. Choose any mirror, preferably one that is closest to your country. Then download the file for an installer tool such as Universal USB Installer to create a Live USB from the ISO you just downloaded.
You now have both the ISO and the software to burn the ISO to the USB. Plug in your USB and run Universal USB Installer. Select Linux Mint for the distribution.Create a Space for Linux Mint
Prepare your disk by making a new partition. You can either split an existing partition or create a new one.
To create a new partition, you can use a third-party app or a disk management tool such as Paragon Partition Manager.Booting From Windows 10
From the start menu, type partition to bring up the Disk Management utility.Reboot Your Computer
Plug the live disk or USB into your computer and restart it.
Press the F12, F1, or F10 function key while it is booting to get to the boot menu (which key will vary depending upon your computer.)
Choose the option to boot from USB or Removable Media.Start The Installation
You will be asked to select your language, select a keyboard layout, and then prompted to install third-party software.
Doing this will ensure that all the software that is required for any proprietary hardware you might have, such as multimedia codecs, will work.Choose Installation Type
In the next step, you will be asked to choose the type of installation.
Don’t select Erase disk and install Linux Mint. This will destroy everything else on your hard drive and install only Mint.
Choose Install Linux Mint alongside Windows Boot Manager. The next step is to select how much space you want to allocate for Windows and Linux Mint.
While the installation is processing, you will see a slideshow. When the installation is complete, you will be asked if you want to Continue Testing (continue using the test environment) or Restart Now.Test To See If Dual Boot Is Working
Put in your password and see the Welcome to Linux Mint screen.
Choose your settings such as System Snapshots, Driver Manager and Multimedia Codecs.
For more details on how to customize a distro and other aspects of it, watch Linux Mint 19.1 “Tessa” Cinnamon Edition Review.Testing Windows
Setting up a dual boot with Linux Mint and Windows 10 is simple. If you want to add Ubuntu or another version of Windows, use the same process outlined above.
Security is a major concern for everyone these days. When it comes to operating systems, we know better how quickly they get attacked by viruses and malware. And more popular the operating system, the more the people who want to attack it.Secure Boot, Trusted Boot, Measured Boot
Microsoft has made some bold claims regarding security and data management on Windows, and so I decided to study them a bit, and I must say that I am impressed. First, let us see what is understood by Secure Boot, Trusted Boot, and Measured Boot in Windows 11/10/8.1/8.
Secure Boot: PCs with UEFI firmware and a Trusted Platform Module (TPM) can be configured to load only trusted operating system boot loaders.
Trusted Boot: Windows OS checks the integrity of every component of the startup process before loading it.
Measured Boot: The PC’s firmware logs the boot process, and Windows can send it to a trusted server that can objectively assess the PC’s health.
Using the Measured Boot, Windows can further validate the boot process beyond Secure Boot. The start-up processes are now signed, protected, and measured. They are then stored in the TPM chip to prevent rootkit or malware infection. For TPM-based systems, Windows will perform a comprehensive chain of measurements during the boot process, called measured boot, which can be used to validate the boot process to prevent rootkits and other malware.
Windows has taken an innovative approach to address the issue of the insecure boot, which prevailed for a long time. Power attackers and virus developers prefer customizing viruses and designing them to attack the PC right at the time of boot. It is probably because boot time is when security is at its weakest, and antivirus and firewall do not guard the system.Let’s take a few minutes and go over some common scenarios we face today:
Antivirus starts functioning way after boot completes.
Unsigned applications (chat apps, etc.) begin to appear before you start your work.
All the unwanted application ultimately slows down your PC, thus adding more to the pain.
It is a universal temptation to get things done in a matter of seconds. Well, Microsoft has guaranteed it with a fast boot time of around eight seconds and with much more security as well, this time.
Fix: Secure Boot State Unsupported error in Windows 11Let’s check out what Windows does with its Measured Boot:
Secure boot stops malware in its tracks and makes Windows significantly more resistant to attacks. In the worst case, if the virus has already made it into your PC, Windows will block its spread and actions until the operating system is loaded, and antivirus takes guard.
If at any moment during boot, Windows finds un-trusted applications trying to load, Windows will block its actions. Read Early-Launch Anti-Malware (ELAM) technology.
Windows allows antivirus and firewalls to load up early during boot time to assure protection up-front.
And finally, Windows, if it detects any registry errors or driver errors, it will fix it automatically.
Windows 10 thus has the power and ability to protect your PC from malware and malicious programs right from the boot-time.
Check if your PC supports UEFI or BIOS.
Full Fix: Windows 10 Boot Loop After Update
Many users have reported Boot loops after updating their Windows 10 PCs.
We’ve created the article below just for that’s the scenario, so go ahead and follow the steps.
We have an entire Boot Errors Hub filled with such similar articles, so visit that as well.
For other non-Boot-related error fixes, go to our Troubleshooting section.
Windows 10 was a fresh new iteration to the lineup of the Windows operating system for PC, laptops, and other systems.
Windows 10 came with some really nice features that were not only great for desktop users but, this time, Microsoft had actually found a proper way to integrate support for touch-based system on Windows 10, and both desktop, as well as touch experiences, were kept separate from each other this time which allowed users to use Windows 10 the way they want to use it.
But even Windows 10 wasn’t perfect at release. Several bugs made sure that people run into all sorts of issues from time to time.
But Microsoft has been quite active in releasing fixes related to these bugs. One such bug was of an update that made many PC and laptops go on a spin after the update was installed.
The systems on which the update was installed were facing issues related to the boot loop where the PC would keep rebooting and not really going past the boot process.
This made many systems useless and of course, people who were facing this problem were quite pissed. Let us see what caused this issue and how Microsoft managed to fix it.
Boot loop in Windows 10 can be quite problematic and prevent you from accessing Windows. Speaking of boot issues, here are some common issues that users reported:
Reboot loop Windows 10 – This is a relatively common problem, and it’s usually caused by a problematic update. If you’re having this issue, simply remove the problematic update and install it again.
Windows 10 boot loop after reset – Sometimes you might get stuck in boot loop due to your drivers. Outdated drivers can cause this problem, and in order to fix the issue, you need to update them and check if that helps.
Windows 10 continuous reboot – Sometimes this issue can occur if you’re having issues with damaged system files. However, you can fix that simply by running a couple of commands in Command Prompt.
Windows 10 boot loop automatic repair – Your BIOS settings can also cause this issue to appear. Several users reported that the Secure Boot feature caused this issue, and in order to fix it, you just need to disable this feature.
Windows 10 boot loop blue screen, black screen, BSOD – Sometimes a blue screen can appear and force your PC to restart. To fix that, you’ll need to write down the error message and do a bit of research to see how to properly fix the problem.1. Use Command Prompt
copy *.* backup
copy *.* ..
Sometimes you might encounter a boot loop due to corrupted system files. However, there’s a way to fix this issue. Windows makes a copy of certain system files, and if anything goes wrong, you can easily restore your system files.
When asked to overwrite the files, just press the A key and then press Enter. After the process is finished, type exit and the issue should be resolved.2. Use Safe Mode
If you’re stuck in a boot loop on your PC, you might be able to solve the problem simply by using Safe Mode. As you know, Safe Mode is a special segment of Windows that runs with default settings, and in case you have a problem with Windows, Safe Mode is a perfect place to start troubleshooting.
Once you enter Safe Mode, check if the problem is still there. If the issue doesn’t appear in Safe Mode, you can use the Safe Mode in order to troubleshoot the issue further.
If you’re stuck in a boot loop, the problem might be your drivers. According to users, outdated drivers can cause this issue to appear, and in order to fix it, you need to update your drivers to the latest version.
The issue is usually caused by graphics card drivers, but your hard drive or SSD drivers can cause this issue as well.
Updating your drivers manually can be a tedious task, especially if you have to update multiple drivers. However, you can speed this up by using Outbyte Driver Updater.
More so, if you have drivers that are either broken or missing altogether, Outbyte Driver Updater will handle those as well thanks to the massive associated database that powers it.
All you need is a stable Internet connection, a system Restart once Outbyte Driver Updater does its job, and you’re done.
Expert tip:4. Disconnect the unnecessary USB devices
We all use all sorts of USB devices on our PCs, but sometimes these devices can cause a boot loop to occur. However, you can fix the problem simply by disconnecting unnecessary USB devices from your PC.
As a rule of thumb, you should keep only the default devices connected to your PC during the update process.
Devices such as external hard drives, Wi-Fi adapters and similar can cause this issue to appear, so be sure to disconnect them.
Several users reported that a USB dongle for wireless keyboard caused this issue to appear, but after disconnecting it, the issue was resolved completely.
Once the problematic device is disconnected, your PC should be able to boot and the problem with boot loop will be fixed.5. Disable Secure Boot in BIOS
If you’re stuck in a boot loop after Windows Update, the problem might be your BIOS. The most common cause for this problem is a Secure Boot feature, and in order to fix the issue, you just need to find and disable this feature.
To do that, you just need to follow these steps:
After making these changes in BIOS, you should be able to boot to your PC.6. Disable your Internet connection
According to users, sometimes you might get stuck in boot loop due to your Internet connection.
Sometimes the update process can fail, but if you’re connected to the Internet, your PC will try to download the update again causing you to get stuck in boot loop.
This can be a problem, but you can fix it simply by disabling your Internet connection. If you’re using an Ethernet connection, simply unplug the cable from your PC and try to boot your PC again.
In case you’re using a wireless network, simply turn off your router during the update process.
After you disable your Internet connection, the upgrade process will be completed and you’ll be able to boot to your system.
According to users, this issue appeared after installing a certain update. To fix the problem, you just need to find and remove the problematic update.
According to users, KB3081424 was the cause of this problem, but keep in mind that almost any other update can cause this problem to appear. If you’re having issues with the aforementioned update, simply install KB3081436 update and the problem will be resolved.
If you decide to remove an update, keep in mind that Windows 10 might try to install it again automatically. By default, Windows 10 will automatically install the missing updates, so be sure to block Windows from automatically installing the updates.
Being stuck in a boot loop can be a big problem, but we hope you managed to fix this issue using one of our solutions.
Was this page helpful?
Most people are looking for ways to remove as many programs from the Windows startup process as possible to speed things up. If you are in the other boat though and would like to add something to the Windows startup, be it a program, file or folder, this guide will show you how to add anything you like to the boot process.
How to Move the Show Desktop Icon in Windows 10.
There a plenty of programs and apps that like to set themselves to start on boot, even if they don’t really have much to offer you by doing so. Apart from firewalls, antivirus and such programs as daemon tools, you probably have no need for much else. However, if there is something you would like to add to the boot process but can’t find an option in the setting of the serivce, you can manually add it. Apps, folder, files, and programs are all possible to add.How to Add Anything to the Windows Startup Process.
The process might seem a little complicated to start but it’s actually quite easy so don’t get intimidated by the process.
Starting the process you will need to press Window Key + R to open the Run tool.
Next, type shell:startup into the box, then press enter. This will open the Startup Folder for Windows.
Inside this folder Create a Shortcut for any folder, file, app or .exe file. This will make them automatically launch when Windows boots. You can also drag and drop shortcuts from other places into this folder if you wish.
Note: If you would like to make Windows Store apps launch at startup, you’ll need to follow a slightly different path, which you can find out about here.How to Create Shortcuts to Place into the Startup Folder on Windows 10.
Making an program or folder shortcut to place in the Windows startup folder might be new for you so this is the full method you can follow to make sure the shortcut you create works properly. The first thing you are going to have to do is open the Startup Folder in a new window. Next, you are going to have to navigate to the location of the item you wish to create a shortcut for (in a separate window).
Using the right mouse button, hold and drag the item into the Startup Folder, when you have the item over the window you can release the right mouse button to drop the file into place. On release, a pop-up menu will ask you if you wish to create a shortcut here, obviously, you will need to choose Yes. Congratulations, you have successfully created a shortcut for the Startup Folder.
Since late 2009, talk of how Google’s Chrome OS is being positioned to “take on” Microsoft Windows has been promoted by individuals who I believe have no idea what they’re talking about.
By Google’s own admission, Chrome OS is being designed for near exclusive use on netbook computers, due to its minimalist nature. And as we know, netbooks make up a small piece of the collective PC market. This clearly leaves out of desktops and laptops, which will remain dominated by the Windows OS (near term, at least).
Or perhaps instead there’s yet another alternative target that Google has yet to reveal?
In this article I’ll explore all these possibilities and share some of my own thoughts as I see the future of Chrome OS moving forward. I will discuss how Ubuntu, Windows and yes, even OS X might play into Google’s long term game plan.
Is Chrome OS Linux or not?
In order for there to be a any correlation between Ubuntu and Chrome OS, we need to determine how similar Linux and Chrome OS actually are. Chrome OS is indeed based on the Linux kernel. The Chrome OS project has also benefited greatly from code provided by Moblin and Ubuntu as well.
So given that Linux is basically a kernel, then it’s safe to point out that Chrome OS is indeed based on Linux.
Like Linux distributions such as Red Hat and SuSE, Chrome OS has a development base and what will likely become a main user base. The development base would be the open source project known as Chromium OS while the future user base is expected to be what we call Chrome OS.
The differences between the two is that the latter has yet to be put out there for testing, while Chromium OS is available for developers to get their feet wet with the code provided.
In short, they’re essentially one in the same, each holding its Linux roots close to its core.
Chrome OS isn’t competing with Windows
Google isn’t trying to compete with Windows or Ubuntu. To Google, the desktop operating system is merely a means to an end.
While Microsoft seeks out market share for their operating system and other software, Google is looking to continue to build presence on as many platforms as possible. This effort includes (of course) their own Chrome OS, in addition to Windows, OS X and other Linux distributions.
But perhaps the biggest thing keeping Chrome OS from being an issue for Ubuntu — or even Windows for that matter — is the fact that you won’t be able to install it yourself. According to my research, it will be available pre-installed only.
Will Chrome OS become a boon to other Linux distributions?
I believe Chrome OS is a benefit for other Linux distributions thanks to the likelihood of contributed code. Despite this, however, the idea that Google is getting people to give alternative operating systems a second look is merely happenstance and luck for those who want to see the Linux gain on the Windows OS.
No, I think that Google is utilizing Linux code to build its Chrome OS project, then promote what I believe to be an tool that could gain major traction: A Google Chrome Webstore for desktop computing.
Update the detailed information about How To Dual Boot Windows 10 And Ubuntu on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!