You are reading the article How To Fix When Printer Is Printing Crooked ? updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Fix When Printer Is Printing Crooked ?
The problem why is my printer printing crooked may be related to the wrongly configured cartridge alignment.
It is really annoying to get stuck with the printing issue amidst your work!
The printer driver may need a reinstallation, and this has solved the problem for most of the users.
In today’s article, I am going to discuss about the easy fixes to this problem.
Always check the alignment of the paper tray. Sometimes the paper tray may fit loose, and some piece of paper may create the trouble.
Have a clean paper tray free of dust before you proceed to repair the printer.
When you are facing printer not printing straight issue, first verify whether the problem is taking place while you copy from ADF or while printing.
To verify this, follow the steps mentioned below:
Step 1: First start by printing a test print. If you find that the print is not distorted, make one copy. In the ADF set the test print face up.
Step 2: Make some adjustments of the paper guides so that it is fitted to the width of the print.
This will make the document straight.
Step 3: First start by pressing copy mode and then Colour start.
Step 4: While feeding avoid pulling the document and avoid using wrinkled, folded, or pasted documents, and check that the documents are properly dry that is written with ink.
Step 5: Check that the paper is according to the recommended specification and it is installed properly.
Step 6: Pull the paper tray out and the back paper guide is adjusted properly.
Check if the problem is sorted out. Else move on to the next workarounds.
If the alignment is mis-configured, then it is likely that you may face trouble while printing.
Check that the paper tray is properly aligned. With the help of the Tools menu, you may easily realign the cartridge.
But before doing so, remove the duplexer and then reinsert it to check so that there is no paper jam.
Follow the steps mentioned below:
Step 1: While you remove the duplexer from the printer check that the paper is stuck nowhere.
Step 2: While reinserting, check that it is placed properly. Make sure to clean off the dust from the duplexer.
Step 3: Hit the wrench icon or the Setup button on your printer.
Step 4: Now go to the tools option and select it. You may use your right arrow key for reaching the Align Printer option.
Step 5: Hit the Ok button and select the option. When the message Aligning cartridges pops up, you need to wait patiently for a couple of minutes.
Step 6: When the process gets completed, the printing process will start automatically. Now print a document and check if this has done any improvement.
Now try to print any document on your printer and check for any improvements.
If you are having a third-party cartridge, it may cause some trouble with your HP printer.
It may also raise the printer printing crooked issue. Make sure to use the original version of HP ink cartridges to avoid these sorts of trouble.
You can search with your model from the search box provided by the HP website for finding a compatible ink cartridge for your printer.
Beware of some fake HP ink cartridges and always make sure to scan the QR code provided.
You can also verify on the HP verification page by entering the serial number given on the label of your printer. Hope it will solve your problem.
Always make sure to check that the printer is properly calibrated.
The printer will not give the desired result if it is not calibrated. Align its printhead and check whether this resolves the problem with black ink printing for you.
Besides the Hewlett-Packard printer comes with the option or tool to calibrate them properly.
After selecting the option provided, you can start to calibrate the printer and start printing an alignment page. Go through the printer’s manual for the details.
While checking the manual never forget to check the warranty period of your HP printer.
In case you find that it is under the warranty period, you can return the printer as well.
This is another common technique to fix the printer not printing straight issue. The printer driver may be outdated and behaves abnormally.
Sometimes the bugged drivers also give you headaches. Uninstalling and reinstalling the same may fix the problem instantly.
I am mentioning the process to uninstall and reinstall the printer driver. Follow the steps mentioned below:
Step 1: Go to the search menu and type Device. Now this will open your Device Manager.
Step 2: Expand the Device Manager and search for the Print Queues option.
Step 4: When the printer driver gets uninstalled give your system a fresh restart.
Step 5: After this Windows is going to install the printer driver automatically after a fresh reboot.
Step 6: In case you fail to detect the problematic printer driver, go to your Device Manager, and from there, move on to the Actions section. Now select the Scan For Hardware Changes option.
Always make sure to have the latest version of the drivers otherwise that will give you other issues too.
So, I hope this article has helped you with some feasible solutions to solve the much annoying why is my printer printing crooked issue.
You can also shoot us a mail at your convenience. We are always eager to hear from you.
You're reading How To Fix When Printer Is Printing Crooked ?
How To Fix Printer That Prints Blurry
How to Fix Printer that Prints Blurry [Canon, HP, Epson] Find out why your printer prints blurry and how you can solve this problem in just a few steps
870
Share
X
If you’re printing something after a long while, you might get blurry images.
This problem can appear because of many reasons but the main causes are the printer driver or the lack of ink.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
There are times when your printer might be printing blurry images. This happens to be a common phenomenon with all printers and is more likely to happen after you start using your printer after a long gap of time.
I changed my ink cartridges and now the printing is blurry and shadowed, despite running the alignment process NUMEROUS times. How do I get my the text to be crisp and clean again?
Why is my printer printing blurry?Nothing to worry though as the issue can be remedied easily. In fact, all printers come with a built-in mechanism to deal with just such a scenario. Read on to find out the solution to the problem!
What can I do if my printer is not printing clearly?Often, your computer system might not be able to update the generic drivers for your hardware and peripherals correctly. There are vital differences between a generic driver and a manufacturer’s driver. Finding the correct driver versions for every hardware component can become tiresome.
That’s why a dependable updater can help you find and update your drivers automatically. We strongly suggest the Outbyte Driver Updater, and here’s how to do it:
Download and install the Outbyte Driver Updater app.
Launch the software and wait for the app to detect all incompatible drivers.
Now, it will show you a list of all outdated drivers to select the ones to Update or Ignore.
Restart your PC to ensure the applied changes.
Outbyte Driver Updater
Maintain your device healthy by letting OutByte Driver Updater find the latest driver options.
Free trial Download now
Disclaimer: You may need to upgrade the app from the free version to perform specific actions.
2. Check the ink levelsA good first step for you to do will be to see if the printer has enough ink in its repository.
Printers of every kind allow the users to check the ink level, which can be either via PC or straight off from the printer device itself.
Since this process is different for every printer, be sure to check the user manual for specific instructions.
The associated printer app should have the necessary information and will let you know if the ink levels are within normal limits.
If the printer cannot print B&W without color ink, you can check our guide and find out how to fix the problem.
3. Clean the print head nozzlesThis again is something that needs to be done periodically as the nozzles often tend to get choked, more so if the printer has been sitting idle for a considerable period of time.
That is also precisely the reason the printer also comes with a self-cleaning operation to clean choked nozzles.
However, all printers have their own unique ways to initiate the cleaning process, so be sure to check out your printer manual.
However, a general rule of thumb is that the process can be started from within the maintenance section.
Also, it might be necessary for the cleaning operation to be performed multiple times for a good and thorough cleaning job.
4. Check the alignmentThe alignment of the print cartridges or toners can also be equally important in determining the quality of the print. So, check to see if the alignment is perfect for the type of print you need.
If need be, perform the alignment operation multiple times until the desired result is obtained.
Refer to the company manual for steps on this though this is another option that is usually found in the maintenance section.
5. Settings issueMost printers allow the user to set the quality of the print. Those can vary from draft quality to anything resembling the best quality.
Changing the setting to that which offers the highest quality of prints can also solve the issue of blurry prints.
6. Use the right paperPoor quality of paper used for printing can also lead to blurry prints.
That makes it important that you use paper of the right quality that can be the best match for your printer, or for that matter, the type of ink that the printer uses.
Using the right-sized paper is equally important for getting the best quality prints each time.
However, if your printer is still printing blurry, there might be something wrong with the hardware itself. In that case, it’s best to contact the official repair center.
Was this page helpful?
x
Start a conversation
How To Fix Delay Or Lag When Typing In Windows
Having characters appear on the screen seconds after you press them on the keyboard can slow you down and reduce your productivity. Many factors make typing feel out of sync on Windows devices. A slow computer, faulty USB ports, outdated keyboard drivers, and misconfigured keyboard settings are a few of the reasons for keyboard lag.
Let’s explore ten troubleshooting steps that can fix keyboard delay when typing.
Table of Contents
Close Unused AppsYour keyboard’s response time may begin to lag when your computer is running slow. More precisely, when it’s low on core system resources (CPU and/or RAM). Close unused applications and check if that improves the keyboard input speed.
You can also reference this guide on boosting Windows’ speed to learn why your PC slows down and how to fix performance issues.
Troubleshoot the Keyboard ConnectionIf you’re using a wired external keyboard, make sure the cable is tightly plugged into your PC’s USB port. Unplug the keyboard and plug it back into the port, or switch the keyboard to a different USB port. You could also use the keyboard on another computer. If the typing delay persists, the keyboard is probably faulty.
Other USB accessories can also interfere with your keyboard connection and cause it to lag. Unplug other USB devices connected to your PC and check if that fixes delays in typing speed.
For wireless keyboards, ensure the USB receiver/dongle is plugged correctly into your computer. If you have connected it to a USB hub, plug it directly into your computer. Additionally, check that the keyboard’s battery isn’t low. Otherwise, plug the keyboard into a power source or replace its batteries.
Also, ensure the keyboard is near the dongle/receiver or your computer. This also applies to Bluetooth-powered keyboards. Using a wireless keyboard several yards away from your PC could lead to input delay.
Disable Filter KeysDo you often press a key multiple times before your PC receives the input? Does your computer fail to register keystrokes when you press a key briefly? You might have activated “Filter Keys” by accident; holding the right Shift key for 8 seconds enables the feature. Filter Keys prevent unwanted keystrokes by decreasing the keyboard input speed.
Microsoft designed the Filter Keys functionality to make typing easier for users with neurological disabilities like hand tremors or stiffness. If Filter Keys is active on your computer, turn it off and check if that normalizes the keyboard response speed.
1. Open the Windows Settings menu select Ease of Access.
2. Scroll through the sidebar and select Keyboard.
3. In the keyboard settings menu, toggle off Filter Keys and uncheck “Allow the shortcut key to start Filter Keys.”
Alternatively, launch the Control Panel, select Ease of Access Center, and select Make the computer easier to use.
Run Windows Hardware TroubleshooterWindows can fix itself sometimes depending on the nature of the problem. Windows 10 ships with a built-in troubleshooting tool that can diagnose and fix delays in typing with your PC’s keyboard. Use this tool to resolve problems with a particular key or the entire keyboard.
Wait for the troubleshooting to scan your computer—that could take about 1-5 minutes—and follow the instructions on the next page. Try the next recommendation if the troubleshooter doesn’t detect any problem with your keyboard.
Reboot Your ComputerClose all apps and documents (so you don’t lose unsaved changes) and restart your computer. If you’re using an external or wireless keyboard, disconnect it from your PC before performing a reboot. Plug or reconnect the keyboard when your PC comes back on and see if that resolves the typing delay.
Update Keyboard DriverDevice drivers determine how the internal and external hardware components of your PC (e.g. display, keyboard, speakers, disk drives, etc.) communicate with Windows. A device may malfunction if its driver is outdated.
If your keyboard delays the input of keystrokes when typing, head to the Windows Device Manager and check if the keyboard driver is updated.
3. Select Search automatically for updated driver software.
Connect your PC to the internet for the best result. Wait till Windows completes the check and install any available driver update. If Windows says you have the latest driver version, uninstall the driver (see the steps below) and try again.
Reinstall Keyboard DriverYou may experience delays when typing if your PC’s keyboard driver is corrupt or incompatible with the keyboard. Fix this by uninstalling the driver; Windows will install a fresh copy afterward.
2. Select Uninstall on the confirmation prompt to proceed.
3. To reinstall the keyboard driver, select Action on the Device Manager’s menu bar and select Scan for hardware changes.
Rebooting your PC will also reinstall the keyboard driver.
Modify Keyboard PropertiesOne good thing about Windows is that it offers extensive customization options. If the delay occurs when you hold a key or press it multiple times, follow the steps below to adjust your keyboard’s “Character repeat settings.”
1. Press Windows key + R to launch the Windows Run box.
3. Adjust the “Repeat delay” or “Repeat rate” slider to fix the delay when typing. Before you do so, here’s what both options mean:
Repeat delay: This describes how long you have to hold down a key before Windows repeats the input on your screen.
Repeat rate: This option describes the speed at which you want Windows to repeat the keystroke input when you hold a key.
To fix keyboard delay when typing, increase the “Repeat rate” (from Slow to Fast) and shorten the “Repeat delay” (from Long to Short). Note that fast repeat rate and short repeat delay could also lead to unintentional duplication of keystrokes. Experiment with these options until you find the perfect balance.
Troubleshoot Wi-Fi InterferenceYou may experience lag when typing on a wireless keyboard if your Wi-Fi router is close to your computer. That’s because the signal from your router may interfere with the Bluetooth keyboard’s signal. To prevent this, you can either disable Wi-Fi or move your PC away from the router. That fixed the issue for some Windows 10 users.
Perform a Clean RebootSeveral system (and third-party) apps and services start up automatically when you boot your computer. While some of these services help your PC function, they can sometimes slow down your PC and other apps.
A clean boot will load Windows with only essential apps, drivers, and programs. That may resolve the conflict and help you determine if an app or service is responsible for the lag when typing. Refer to this guide on performing a clean boot in Windows 10 to learn more.
Check for Dirt and Hardware DamagesYour keyboard may fail to register key presses if there’s dirt, dust, or other foreign material stuck underneath the keys. The problem could also be due to physical damage to the keyboard or your PC’s memory module.
Clean the keyboard, and if you can, take out your PC’s memory module and plug them back in properly. We recommend taking your computer to an authorized service center to get these done. Don’t try to do it yourself so you don’t further damage the keyboard and other device components.
Enjoy Lag-Free TypingShould the keyboard delay persist, try resetting the keyboard’s settings to factory default. You could also try performing a system restore if the problem started after installing a new driver, OS update, or third-party software.
Fix Canon Printer Error 5C20 On Windows Pc
A lot of users when trying to print something or run maintenance are seeing Error Code 5C20. Users are hearing peculiar sounds when trying to do the task, and then after probing a bit they see the error code in question. If your Canon Printer is showing Error 5C20 on your computer, then try the solutions mentioned in this article to resolve the issue.
What is Canon Printer Error 5C20?Usually, we can say that Error 5C20 is a hardware error. Your Logic board is at fault here, the rollers and the carriage are not able to move. Obviously, it is not intentional are occur because of some glitch. However, they can be resolved and we will see how.
Also, the issue can also occur because of some software glitch. There can be something wrong with the printer driver installed on your system or some files that are related to the printer that can go corrupt. There is a way by which you can resolve all of this easily and we are going to talk about this in detail hereinafter. So, without wasting any time let us hop into it.
Fix Canon Printer Error 5C20 on Windows PCBefore starting the troubleshooting, it is recommended to update the Windows. This is something that works for many of us when we stumble upon error such as the one in question. Updating the OS will also update the driver including the Printer driver, and if the issue is because of a bug, then it will resolve it for you.
If you want to fix Canon Printer’s Error 5C20, then try the following solutions to resolve the issue.
Restart your Canon Printer
Check the Print Head of your Printer
Run Printer Troubleshooter
Reinstall Printer Driver
Check the Belt
Let us talk about them in detail.
1] Restart your Canon PrinterWe should start troubleshooting by restarting the Canon Printer. This is something that has worked for many users and has helped them. We are going to do that and see if that works. Follow the given steps to do the same.
Power off the Canon Printer.
Unplug the printer and wait for half a second.
Plug the printer and power it on.
Finally, try printing something or doing what you were doing when this message appeared in the first. Hopefully, it will work for you.
2] Check the Print Head of your PrinterUsers seeing the error code in question has also complained that the Printer starts making peculiar rattling noises. We are going to check the Print head and see if that works. Follow the given steps to check the condition of a potential reason.
Power off your Printer.
Remove the cover panel.
Now, pull out the lever, which should be orange or grey in colour.
Remove the ink cartridges and check if there is some issue there. Even if there is no issue with the Print Head, you should still clean the area.
Finally, turn on your Printer, connect your computer and see if that helps.
3] Run Printer TroubleshooterWindows has the feature that allows it to resolve some printer-related issues. We are going to deploy it and see if they are able it fix the problem. Following are the steps to run the Printer troubleshooter.
Windows 11
Open Settings.
Select System.
Windows 10
Open Settings.
Select Update & Security.
Wait for the process to complete and see if it helps.
4] Reinstall Printer DriverAs mentioned earlier, the Printer Driver can get corrupted. What you do is remove the driver and when you reattach it next time, your computer will directly detect and reinstall the driver. Follow the given steps to uninstall the Printer Driver.
Disconnect your computer from the Printer.
Open Device Manager.
Expand Printer queues.
Then restart your computer, reattach the printer and see if that works. If that doe not, then you need to download the Printer driver and install it.
5] Check the BeltThe belt that controls the cartridge and makes it go back and forth can cause the issue in question. If you want to find the belt, just look behind the cartridge carriage. To access it, just remove that carriage and see if it is placed correctly. Just hover your hand over the wheel and see if it is in its place. Hopefully, it will work for you.
Hopefully, these solutions will help you in resolving the Canon Printer error.
How do I reset my Canon mx920 printer?If you think that resetting the printer will resolve the issue, then you are right. You can hold on to the power button, wait for 10-20 second, and power it back on. However, we would recommend you to check the first solution (mentioned hereinafter) to restart the printer and hopefully, it will work for you.
Also Check:
How To Access A Web Page When It Is Down
Have you ever tried to access a website only to get the error message “Service is Unavailable?” It can be very frustrating, especially when you are in urgent need of information that you had earlier found on that website. The good news is nothing vanishes completely from the Internet. So whether a website has been down for some minutes or inaccessible for months, there are some ways that you can still view its content.
If you are trying to access a website and it won’t load but others can access it, it could be due to a number of reasons. The first thing to do is determine which end is the issue. Here are three possibilities:
Your ISP (Internet Service Provider)
Your terminal
The website servers could be down
If the issue is with the website servers, there is nothing more you can do but wait. However, you can still view your recently opened pages through the various options described below.
How to access a web page when it’s down Option 1: Google cached pagesGoogle makes a cached version of every web page you visit, and if the site is inaccessible, Google lets you access the cached version of that page instead. So if you are trying to access a website that isn’t available from Google search, you can easily access its cached copy. All you have to do is type the site’s URL prepended with “cache:” in the Google search box. It should like this:
With this method you will also be able to see the date and time when Google created the cached copy.
Option 2: Internet Archives Wayward MachineAnother place you can find old versions of web pages is the Internet Archives Wayback Machine. While the Wayback Machine might not display as much as you would find in Google’s cache, it does allow you to go further in time to see how a website looked years ago.
To use this tool, simply head over to the Internet Archives Wayback Machine page. Enter the URL of the website you want to view or the address of a web page you want to visit and hit enter.
The more popular the site is, the higher the number of archived pages that this tool will provide. With this tool you can access a website if it’s down at the moment. However, if you are interested in fresh content, the Wayback Machine won’t help.
ConclusionWith the cached version, you won’t be able to access a web page as you could if it were up. However, if you are looking for an old post and the site is inaccessible, a cached copy of the page can prove to be very useful. But if the website is blocked, you may have to get your hands a little dirty. Check out our article on how to access blocked websites.
Kenneth Kimari
Kenn is a tech enthusiast by passion, Windows blogger by choice, and a massive coffee imbiber. He likes watching sci-fi movies in his free time and tearing gadgets apart so he can fix them.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
5 Ways To Fix Printer In Error State On Windows Pc
5 Ways to Fix Printer in Error State on Windows PC Find out what experts recommend as a fix
5
Share
X
The printing process is blocked by a system issue, prompting the
Printer in an error
state
message
.
To get your printer out of the error state, the first solution is to change the port settings.
Specific software conflicts are not to be excluded from the culprits’ list, so make sure you check that out as well.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
The printer plays a critical role for users who require taking a physical copy of their documents, pictures, or other forms of data. But, some Windows users encountered the Printer in an error state notification when trying to use it.
This prevents you from executing the print job or accessing the printer in general. And this is quite infuriating for many, having a printer right beside you and being unable to use it.
As is the case with any issue, the Printer in an error state problem too can be easily fixed. But before we head to that, let’s find out why you are encountering it in the first place.
What causes the printer to be in an error state?There are various reasons why you may be encountering the error, and here are the most common ones:
System permission settings: If the required permissions have not been provided, the printer is bound to throw errors from time to time.
Incorrect or corrupted drivers: Many reported that it was the wrong or corrupt driver that caused the error. One user had the message show up after installing the HP drivers for a Canon printer.
System conflicts: Arises due to misconfigured settings or conflicting hardware and software.
Issues with the printer itself: This includes problems like printer low on/out of paper, paper jams, or low on ink, amongst others.
Hardware-related issues: Check the cables, and look for damaged printer ports and internal debris.
Connectivity issues: Reconnect the printer, verify compatibility, and check for installed drivers.
Also, here are some of the printers you are likely to encounter the issue with:
Xerox Printer in error state
Brother Printer in error state
Canon Printer in error state
Epson Printer in error state
Epos Now printer in error state
Rollo Printer in error state
HP Printer in error state
In order to help you to fix the Printer in an error state issue, we compiled a list of solutions that worked for most users.
These solutions will fix printer in error state in Windows 10 and 11 as well as devices like HP, Canon, and Epson.
How can I fix Printer in error state message? 1. Make ports settings changesOnce done, reboot the computer for the changes to come into effect, and verify if the Printer in an error state message disappears.
2. Make sure that your printer is OnlineTip
You might also be interested in discovering some of the best printer management software to optimize performance.
After changing the status, verify if the Printer in an error state problem is fixed. In case you still see the notification, head to the next solution.
3. Reinstall the printer driverYou may update the outdated driver manually, but we trust that using the automatic technique will save you time and provide reliable results.
Great program for keeping your drivers in check with its various helpful features.
Free Trial Download now
4. Set the Print Spooler service run automaticallyExpert tip:
If the previous methods didn’t work, you should install the latest Windows Update since it is, most likely, incompatibility to be blamed here. After you are done installing the latest version of the OS, the Printer in an error state problem will be fixed for good.
Because most of today’s modern cross printers have wireless capabilities, they become an attack gateway and are vulnerable to viruses and malware.
In this regard, we strongly recommend that you choose a reliable antivirus program that you can use to secure your printer and, ultimately, your activities.
How can I fix Printer in error state on Windows 11?The solutions for Printer in an error state in Windows 10 and 11 remain pretty much the same. So we recommend you first try the ones listed in the previous section.
Printer troubleshooter
Also, run the built-in Printer troubleshooter as it automatically identifies the underlying cause and suggests a solution for it.
In addition to these, you may update the printer driver and make sure to verify that the right one is installed. Also, look for programs that may create conflicts with the functioning of the printer and remove all such apps.
And if none of these work, there’s always the option to perform a system restore, in case the printer worked fine until a few days ago. Just make sure to choose a restore point created before the problem first occurred.
By now, you would have gotten a hang of the Printer in an error state problem and the solutions for both Windows 10 and 11.
Also, learn what to do if you see the Error printing message while using the printer. For those of you looking to purchase a new one, find out the best printers compatible with Windows 11.
Was this page helpful?
x
Update the detailed information about How To Fix When Printer Is Printing Crooked ? on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!