You are reading the article How To Fix Windows 10 Stuck On Just A Moment Loop updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Fix Windows 10 Stuck On Just A Moment Loop
Is your PC stuck on Just a moment loop? Your Windows may have failed to install one or more updates properly and caused a system failure. Or a software you installed may have corrupted the system files. Or something may have corrupted your boot partition.
The simplest solution that you can do is to perform a restart of your PC. Windows should try to reload the required updates again. Hopefully, this should prevent the loop screen from appearing. But if it doesn’t work, you may have a real problem here.
Below, I have compiled a few approaches to help resolve the issue. I have arranged the methods in the order of severity of the issue. Make sure you start working from the first approach. Continue working your way down until the endless Windows 10 blue screen goes away.
Before diving into the actual steps, it is important to learn how to boot your Windows 10 into safe mode. Safe mode is a feature of Windows that boots Windows with the least number of required files. This means disabling any additional drivers, startup software, anti-virus programs, etc.
Safe Mode also restricts the use of certain applications so you cannot use it the same way as normal mode. It is merely for troubleshooting purposes. Once you are done using Safe Mode, you can just restart the computer and it will boot back to normal mode.
Use the following steps to log into Windows with safe mode enabled.
Start Windows in Safe Mode.
Press Win key + R to open the Run window.
Type sysdm.cpl and press OK to bring up a new window.
Go to the Advanced tab.
Under Start-up and Recovery, select Settings.
Uncheck the Automatically restart option.
Check the Write an event to the system log option.
Press OK.
Select Apply and OK to close the window.
Restart PC into normal mode.
Power off Windows by pressing the power button for 10 seconds.
Power it back on.
When the logo appears, hold the power button for another 10 seconds to power it off.
Repeat Steps 1-3 several times. You should see the Preparing Automatic Repair message on the Windows logo screen.
Under the Automatic Repair screen, select Advanced options.
Select Startup Settings.
Select Restart.
When Windows restarts, try with one of the following options disabled.
Driver signature enforcement by pressing 7 or F7
Early-launch anti-malware protection by pressing 8 or F8
Automatic restart on system failure by pressing 9 or F9
Continue on the boot process to see if you can get past the Please wait screen.
If unsuccessful, repeat the steps and try disabling the next option.
Repeat until you identify what caused the issue.
Power off Windows by pressing the power button for 10 seconds.
Power it back on.
When the logo appears, hold the power button for another 10 seconds to power it off.
Repeat Steps 1-3 several times. You should see the Preparing Automatic Repair message on the Windows logo screen.
Under the Automatic Repair screen, select Advanced options.
Select System Restore.
Select a restore point that you would like to restore to. All files and data that were created or modified past this restore point will be deleted. This will include apps as well as data.
You're reading How To Fix Windows 10 Stuck On Just A Moment Loop
Full Fix: Windows 10 Boot Loop After Update
Full Fix: Windows 10 Boot Loop After Update
987
Share
X
Many users have reported Boot loops after updating their Windows 10 PCs.
We’ve created the article below just for that’s the scenario, so go ahead and follow the steps.
We have an entire Boot Errors Hub filled with such similar articles, so visit that as well.
For other non-Boot-related error fixes, go to our Troubleshooting section.
Windows 10 was a fresh new iteration to the lineup of the Windows operating system for PC, laptops, and other systems.
Windows 10 came with some really nice features that were not only great for desktop users but, this time, Microsoft had actually found a proper way to integrate support for touch-based system on Windows 10, and both desktop, as well as touch experiences, were kept separate from each other this time which allowed users to use Windows 10 the way they want to use it.
But even Windows 10 wasn’t perfect at release. Several bugs made sure that people run into all sorts of issues from time to time.
But Microsoft has been quite active in releasing fixes related to these bugs. One such bug was of an update that made many PC and laptops go on a spin after the update was installed.
The systems on which the update was installed were facing issues related to the boot loop where the PC would keep rebooting and not really going past the boot process.
This made many systems useless and of course, people who were facing this problem were quite pissed. Let us see what caused this issue and how Microsoft managed to fix it.
Boot loop in Windows 10 can be quite problematic and prevent you from accessing Windows. Speaking of boot issues, here are some common issues that users reported:
Reboot loop Windows 10 – This is a relatively common problem, and it’s usually caused by a problematic update. If you’re having this issue, simply remove the problematic update and install it again.
Windows 10 boot loop after reset – Sometimes you might get stuck in boot loop due to your drivers. Outdated drivers can cause this problem, and in order to fix the issue, you need to update them and check if that helps.
Windows 10 continuous reboot – Sometimes this issue can occur if you’re having issues with damaged system files. However, you can fix that simply by running a couple of commands in Command Prompt.
Windows 10 boot loop automatic repair – Your BIOS settings can also cause this issue to appear. Several users reported that the Secure Boot feature caused this issue, and in order to fix it, you just need to disable this feature.
Windows 10 boot loop blue screen, black screen, BSOD – Sometimes a blue screen can appear and force your PC to restart. To fix that, you’ll need to write down the error message and do a bit of research to see how to properly fix the problem.
1. Use Command Prompt
C:
cd WindowsSystem32config
MD backup
copy *.* backup
cd regback
copy *.* ..
Sometimes you might encounter a boot loop due to corrupted system files. However, there’s a way to fix this issue. Windows makes a copy of certain system files, and if anything goes wrong, you can easily restore your system files.
When asked to overwrite the files, just press the A key and then press Enter. After the process is finished, type exit and the issue should be resolved.
2. Use Safe ModeIf you’re stuck in a boot loop on your PC, you might be able to solve the problem simply by using Safe Mode. As you know, Safe Mode is a special segment of Windows that runs with default settings, and in case you have a problem with Windows, Safe Mode is a perfect place to start troubleshooting.
Once you enter Safe Mode, check if the problem is still there. If the issue doesn’t appear in Safe Mode, you can use the Safe Mode in order to troubleshoot the issue further.
If you’re stuck in a boot loop, the problem might be your drivers. According to users, outdated drivers can cause this issue to appear, and in order to fix it, you need to update your drivers to the latest version.
The issue is usually caused by graphics card drivers, but your hard drive or SSD drivers can cause this issue as well.
Updating your drivers manually can be a tedious task, especially if you have to update multiple drivers. However, you can speed this up by using Outbyte Driver Updater.
More so, if you have drivers that are either broken or missing altogether, Outbyte Driver Updater will handle those as well thanks to the massive associated database that powers it.
All you need is a stable Internet connection, a system Restart once Outbyte Driver Updater does its job, and you’re done.
Expert tip:
4. Disconnect the unnecessary USB devicesWe all use all sorts of USB devices on our PCs, but sometimes these devices can cause a boot loop to occur. However, you can fix the problem simply by disconnecting unnecessary USB devices from your PC.
As a rule of thumb, you should keep only the default devices connected to your PC during the update process.
Devices such as external hard drives, Wi-Fi adapters and similar can cause this issue to appear, so be sure to disconnect them.
Several users reported that a USB dongle for wireless keyboard caused this issue to appear, but after disconnecting it, the issue was resolved completely.
Once the problematic device is disconnected, your PC should be able to boot and the problem with boot loop will be fixed.
5. Disable Secure Boot in BIOSIf you’re stuck in a boot loop after Windows Update, the problem might be your BIOS. The most common cause for this problem is a Secure Boot feature, and in order to fix the issue, you just need to find and disable this feature.
To do that, you just need to follow these steps:
After making these changes in BIOS, you should be able to boot to your PC.
6. Disable your Internet connectionAccording to users, sometimes you might get stuck in boot loop due to your Internet connection.
Sometimes the update process can fail, but if you’re connected to the Internet, your PC will try to download the update again causing you to get stuck in boot loop.
This can be a problem, but you can fix it simply by disabling your Internet connection. If you’re using an Ethernet connection, simply unplug the cable from your PC and try to boot your PC again.
In case you’re using a wireless network, simply turn off your router during the update process.
After you disable your Internet connection, the upgrade process will be completed and you’ll be able to boot to your system.
According to users, this issue appeared after installing a certain update. To fix the problem, you just need to find and remove the problematic update.
According to users, KB3081424 was the cause of this problem, but keep in mind that almost any other update can cause this problem to appear. If you’re having issues with the aforementioned update, simply install KB3081436 update and the problem will be resolved.
If you decide to remove an update, keep in mind that Windows 10 might try to install it again automatically. By default, Windows 10 will automatically install the missing updates, so be sure to block Windows from automatically installing the updates.
Being stuck in a boot loop can be a big problem, but we hope you managed to fix this issue using one of our solutions.
Was this page helpful?
x
Windows 11/10 Stuck On Please Wait Screen
If you start your Windows computer and it gets stuck on the “Please wait,” screen then here is how you can resolve the issue. After the computer starts, many system services start even before you log in to the computer. Services related to Network, User Interface, and more have to be ready by the time you reach your desktop.
How do you get past Windows stuck on Please wait screen?If you find that your computer screen is stuck on the Please wait screen, then here are some steps that will help you. On this screen, you will not be able to use ALT+CTRL+DEL, and so the only option you have is to remove peripheral devices, reboot the computer and follow these suggestions.
Force Automatic Startup Repair
Disable some Windows Services
Rollback Changes or perform System Restore.
1] Force Automatic Startup RepairIt would have been wise to use a Windows Bootable USB drive to boot into the safe mode, but assuming you don’t have access to any other computer, let’s force this.
First, disconnect external drives, peripherals, etc, wait for a minute and power on your system.
Now, force shutdown- and then power on – your computer three times in a row. You can do this by first turning on the computer and then immediately pressing the power button again, but this time, keep it pressed. It will turn off the computer. If you are using a desktop, you can also switch off from the power supply. Repeat this three times.
The next time you start the computer, it will begin the Automatic Startup Repair process, which will eventually launch the Advanced Recovery mode.
Go to Troubleshoot and then select Safe Mode.
2] Disable ServicesOnce the computer boots into Safe mode, you need to disable three services—
Windows Error Reporting Service,
Network List Service
Network Location Awareness.
To do this, open the Run prompt and type chúng tôi and then press the Enter key.
It will open the Windows Services Manager.
Locate the services we mentioned, and follow the steps for each of the services.
Stop it if the service is running
Change its Startup type to Disabled
Restart the computer.
3] Rollback Changes or perform System RestoreWhen you are back to the regular boot, the, Please wait screen should not hold for long, and you should get the log-in screen or the desktop if there is no password set.
While I wanted to suggest this earlier, now that you are here, you need to find the reason. If there was a change you made to the computer before the issue occurred, you might need to reverse it. If you can figure it out, it will be easy to fix the cause. If not, the best option is to restore your computer to its previous working state.
TIP: There are more suggestions here that will help you if your Windows is stuck on loading some screen.
Why does my Laptop keep saying please wait?If your laptop keeps saying Please wait – then the stuck screen can come due to corrupt Windows files. Windows files may get damaged due to viruses or any unwanted programs.
I hope this post was easy to understand and that you could pass the Windows 11/10 stuck on Please wait screen.
How To Fix A No Bootable Device Error On Windows 10
If you’ve started up your Windows PC and you’re faced with a “no bootable device” error, you might panic. While it could be a sign that your hard drive has failed, it could also point to a misconfigured boot order or corrupt system files, which can be fixed using certain Windows system commands like the System File Checker (SFC).
A “no bootable device” error can be problematic, but it can also be fixed by following some common troubleshooting steps. If you’re facing this error and you’re not sure how to fix it, the steps below should help you resolve the issue on Windows 10.
Table of Contents
Check Your Drive Boot OrderIn many cases, a “no bootable device” error is a sign that your PC can’t find the correct drive to boot up because the boot order, which determines which drives and devices it should load and in what order, is incorrectly configured. To fix this, you’ll need to enter your PC’s BIOS or UEFI settings menu.
Start by switching on your PC. As it begins to boot, you’ll need to press a certain key to interrupt the process and access your BIOS/UEFI settings menu. Check your PC or laptop’s manual for the correct key to press, or attempt common keys such as F1, F10, F12, and DEL.
The BIOS or UEFI settings menu will differ from device to device. Locate the device boot options in your menu and change the order using the on-screen instructions, making sure that your Windows system drive is in the first position.
With the boot order changed, follow the on-screen instructions to save your settings and reboot your PC. When your PC reboots, and assuming no other issues, your system drive will load first, allowing the Windows boot-up process to begin.
Check Your CablingIf there are other issues causing a “no bootable device” error, however, you’ll need to investigate further. If you have a desktop PC, for instance, you may need to open the case and check the cabling to ensure that your hard drive’s power and data cables are connected properly.
Before you close your case, however, you should also check for damage. A frayed or exposed cable may also stop your drive from working. Always replace damaged cabling when you spot it to prevent your drive from being damaged.
Scan for Corrupt System Files Using SFCIf your hard drive is connected properly, it could point to a corrupt Windows installation. You can check for corrupt system files using the System File Checker (SFC) tool.
As Windows can’t boot, however, you’ll need to create a Windows 10 installation USB stick (or DVD) first. This will give you access to a command prompt in the Windows installation menu, allowing you to run the SFC command to scan for corrupt files on your drive.
However, this will only work if your drive is detected by your PC in your BIOS/UEFI menu and by the Windows installation media. Otherwise, this step won’t work, and you’ll need to try another method.
To start, insert your Windows installation media and start up your PC. You may need to change the boot order (using the steps above) to ensure your USB or DVD media is selected first. Once the Windows installation screen appears, select the Shift + F10 keys to open a command prompt window.
In the command prompt window, type diskpart, then list volume. This will give you a list of available drives, as well as their drive letters. Make note of the drive letters assigned to the drive containing your existing Windows installation and to the smaller System Reserved partition.
SFC will check and attempt to repair any errors in your existing Windows installation. Once the process is complete, press the Close button in the top-right corner to close both the command prompt and Windows installation windows and restart your PC.
Repair Windows Bootloader (GPT or MBR) Using DiskpartOlder Windows installations used a Master Boot Record (MBR) to save hard drive partition information to your drive, giving your PC information on where to find and load Windows system files. If you’ve switched from MBR to GPT recently, you may have corrupted your bootloader.
As a PC’s BIOS/UEFI requires this information to boot Windows, you’ll need to repair or replace it first using the diskpart command. This carries extreme risk, however, and could cause you to lose all saved data on a drive. If you’re unsure what you’re doing, you’ll need to use another method to back up your drive first.
If you want to proceed, you’ll need Windows installation media on a USB drive or DVD first to be able to run this command on a drive that no longer boots.
To begin, insert your installation media and start your PC and change your boot order (using the steps above) to load the Windows installer. Once the installation menu appears, select the Shift + F10 keys to open a new command prompt window.
In the new command prompt window, type diskpart, then list disk. Identify whether or not you have an GPT or MBR bootloader by checking whether or not your system drive has an asterisk under the GPT column. If it does (or if the column is missing entirely), type sel disk 0 (replacing 0 with the correct volume disk number listed by the list disk command), then list volume. Make a note of the assigned drive letters at this point.
If you have an MBR bootloader, type exit to close diskpart, then run the following commands sequentially to repair your bootloader and restart your PC: bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd, shutdown /r. If the process is successful, your system drive should boot up correctly. If you see an access is denied warning, you’re probably trying to repair a MBR bootloader on a GPT drive.
If you have a GPT bootloader, select the 100MB System Reserved or (System EFI) partition by typing sel vol 0, replacing 0 with the correct volume number listed by the list volume command. Assign a new drive letter to that drive by typing assign letter Z: (replacing Z: with another available drive letter).
Once assigned, type exit to close diskpart, then run the following commands sequentially to repair the existing GPT bootloader, replacing drive letters with the letter you assigned previously: cd /d Z:efimicrosoftboot, attrib BCD -s -h -r, ren BCD chúng tôi bcdboot C:Windows /l en-us /s k: /f ALL. If the commands are successful, type shutdown /r to restart your PC.
If these steps don’t work, or if you’ve corrupted your bootloader entirely, you may need to wipe and reinstall Windows. This will place a new bootloader on your system drive, but you’ll probably lose any saved files in the process.
Maintaining a Windows 10 InstallationA “no bootable device” error on a Windows 10 PC can be a sign that urgent maintenance is required. Keeping your PC well maintained with regular system updates and a scheduled file backup can help you, especially if your hardware has failed and you need to reset Windows to factory settings.
How To Fix Microsoft Teams Stuck On A Blank White Or Black Screen.
If you are using Microsoft Teams at the moment and are having issues with blank white or blank black screens when performing certain actions like opening files or opening a window to share files. This article will show you several different things you can do to solve the problem and restore proper functionality back to.
Related: How to uninstall Windows 11 update KB5007297 because of bad performance.
Microsoft Teams is one of the most widely used pieces of software on the market, and one of Microsoft’s most frequently updated tools. It’s relatively easy to use and has just about every possible work-related feature you could possibly require. The only problem with Teams is that it has quite a few random problems that have a tendency to pop up semi-frequently.
Over the years we’ve covered just about every Microsoft Teams issue to date, all of which you can check out here. But today’s issue is an entirely new one for us so follow along as we show you several different things you can do to solve the annoying issue in Microsoft Teams that keeps displaying a blank white or black screen when performing certain actions like opening files, etc. Before you jump right in make sure you have at least restarted your computer. This will usually solve most Microsoft Teams issues, including connection issues.
How do you fix Microsoft Teams stuck on a blank white or black screen?
The quickest and easiest way to solve Microsoft Teams black and white screens when performing certain actions on Windows is to simply uninstall the Microsoft Teams app from your computer. Once you have uninstalled it, you’ll need to clear the Teams cache folder (which doesn’t remove when you uninstall the app). This will allow you to install Teams in an entirely fresh state. If you don’t manually wipe the cache you will almost always get the same error occurring again.
To clear your Microsoft Teams cache on Windows 10 you’ll need to do the following.
First, open the Run tool by pressing Windows Key + R.
Next copy and paste %appdata%MicrosoftteamsCache into the text box and press Enter. This will open a File Explorer window in the exact location of one of Teams caches. Press Ctrl+A to select everything within the location then press Delete to delete it all. Once you have deleted everything, do the same for all of the following locations:
%appdata%Microsoftteamsapplication cachecache
%appdata%Microsoftteamsblob_storage
%appdata%Microsoftteamsdatabases
%appdata%MicrosoftteamsGPUcache
%appdata%MicrosoftteamsIndexedDB
%appdata%MicrosoftteamsLocal Storage
%appdata%Microsoftteamstmp
Uninstall Microsoft Teams, clear the cache, then reinstall Teams to fix black and white screens.
If the above steps don’t work for you, you can try uninstalling Teams, clearing the cache, then reinstalling Teams on your computer.
To do this uninstall teams using your preferred uninstallation process, then navigate to the following location and Delete the Teams folder.
C:UsersusernameAppDataRoamingMicrosoft
Once you have removed the Teams folder, Restart your computer, then install the latest version of Microsoft Teams on your computer.
Once done, you should be able to sign in to your account without any issues. Just remember if you are in desperate need to make it to a meeting in time, I would suggest using the web version of Microsoft Teams until you have a few moments to fix the issue.
How To Fix No Sound On Windows 10 After A Recent Update.
If you have recently updated Windows 10 with cumulative update KB4468550 and are now missing all sound, this article will show you how to restore sound on your PC using some simple, easy to follow steps.
How to Fix Apps and Programs Not Showing in the Start Menu on Windows 10.
Update errors on Windows 10 aren’t anything new, with hundreds of different error messages stored in the Windows catalog waiting for the perfect time to flash across your screen. Although Windows 10 has had countless updates aimed at reducing the number of errors and bugs that appear, each and almost every new update seems to create a new problem.
Cumulative update KB4468550 is one such update that has caused some users to lose all sound on their system. The bug was simply caused by Microsoft forcing out an update with the wrong intel sound drivers, which caused a large percentage of users to lose all sound playback. Thankfully Microsoft has already released an update and fix for the problem, however, if it hasn’t worked or you don’t want to install another update that may cause issues, below you will find all the steps you need to follow to get sound working on your machine again. You can read the official Microsoft release regarding this issue below.
“An Intel audio driver was incorrectly pushed to devices via Windows Update for a short period of time earlier this week. After receiving reports from users that their audio no longer works, we immediately removed it and started investigating. If your audio broke recently, and you’re running Windows 10 version 1803 or above, please check to see if the incorrect driver was installed. To regain audio, we recommend you uninstall the driver.”
Related: How to Stop Frequently Visited Sites Showing in ‘Top Sites’ on Microsoft Edge.
How Do You Fix Sound Not Working on Windows 10 After the Latest Update?Even though Microsoft has released a patch for this careless fault, you may still want to manually fix the problem. You may also need to intervene if the patch doesn’t fix the issue on your machine. As the problem is simply an incorrect driver being installed on your system the fix is super simple. Uninstall the driver and install the correct one.
Next look at the parent device, which will most likely be called something similar to: ”Intel SST Audio Controller” (Intel Smart Sound Technology driver version 09.21.00.3755)
Once you have done that, close the Window and Restart your computer. When you start/sign back into Windows, the operating system will automatically download and install the correct driver.
Update the detailed information about How To Fix Windows 10 Stuck On Just A Moment Loop on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!