You are reading the article Install Lewa Os On Xperia Arc updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Install Lewa Os On Xperia Arc
LeWa OS is a new Android 2.3.7 Gingerbread based custom ROM that mixes features from both CM7 and MIUI ROM, for a new and unique experience. With a UI like MIUI, but with CM7.2 features like the inbuilt theme engine, along with fast performance, LeWa OS is a ROM you should definitely try out.
The ROM is stable for everyday use, but is in its early stages, so there are a few issues in it, so unexpected bugs can crop up at any time.
Let’s take a look at how you can install LeWa OS ROM on your Sony Xperia Arc.
This ROM and the guide below are compatible only and only with the Sony Xperia Arc, model number LT15i. It’s not compatible with any other device and may render an incompatible device unusable. Check your device model in Settings » About phone.
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.
Developers → festa20/waynekirby/FreeXperia Team
Torch force closes
A ICS lock screen theme from the online LeWa sever in the themes app
Lock screen is odd at the bottom when you pull it to the bottom of the screen (You’ll know if you try it)
How to Install LeWa OS ROM on Xperia Arc
Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.
Important! Your Xperia Arc must have an unlocked bootloader. You can unlock your bootloader officially → here.
Install ADB on your computer using the guide → here. This is required to flash the requisite kernel on your phone. (Skip if you already have ADB installed on your PC).
Download the latest version of the ROM from the official development page.
Transfer the 2 zip files downloaded in step 4 and 5 to the SD card on your phone.
Extract the Fastboot.zip file to the C: drive on your computer to get a folder named Fastboot with four files inside it.
Now, connect your phone to the computer in fastboot mode. To do this, first plug the USB cable to PC, then pick up your phone and hold the Menu key (key at the bottom right on your Arc), and then, while holding the Menu key, connect the USB cable to your phone.
Open Command Prompt on your computer from Start » All Programs » Accessories.
Now, in Command Prompt, type the following commands to flash the kernel, pressing Enter after each command (Check the screenshot after step 13.2 for reference).
Once the kernel is flashed, you will get a “finished”/OKAY message in the command prompt window. Disconnect the phone from your computer.
Turn on the phone. The screen will turn on and show you the kernel logo. As soon as the blue LED lights up, start pressing the Volume Down button on your phone continuously until you boot into recovery. In recovery, use Volume buttons to navigate and Home button to select options.
Select install zip from sdcard, then select choose zip from sdcard. Scroll to the ROM file on the sdcard and select it.
Now, repeat step 16, but this time, select the LewaOs_Gapps.zip file. Select Yes on next screen to confirm installation of the Google apps package.
After the installation is complete, select go back then select reboot system now to reboot the phone and boot up into LeWa OS ROM.
You're reading Install Lewa Os On Xperia Arc
Unlocking the bootloader allows you to put custom ROMs, kernels and boot images on your Xperia Z3 which cannot be done otherwise. Say you want to install an AOSP based ROM on your Xperia Z3 which need to change the boot image on the device to be compatible with the AOSP code then it can only be done by unlocking the bootloader on your device.
Generally, rooting and custom recovery installation also requires an unlocked bootloader, but thanks to the developer community at work for Xperia Z3 that root is often achieved even without unlocking the bootloader.
Also thanks to Sony for having their entire range of Xperia devices released since 2011 to be bootloader unlockable. Not every Android manufacturer does that, at-least not so easy.
The bootloader unlocking process on Xperia Z3 is fairly simple. And with our step by step instructions with screenshots below, even noob users will be able to do it easily.
Two methods of unlocking the Bootloader on Xperia Z3
There are two methods you could choose from to unlock the bootloader on your Sony Xperia Z3
Unofficially using Flashtool: You can unlock the bootloader on your device using a program called Flashtool. Getting the bootloader unlocked through flashtool is very quick compared to Sony’s official way of doing it. And on a plus note you also save yourself from letting Sony know that you tried to unlock your device’s bootloader (which voids warranty)
Officially from Sony’s website: You can follow Sony’s official way of unlocking the bootloader which is also simple and easy to follow, but not as friendly as Flashtool. In the official method you’ve to get the bootloader unlock key from Sony’s website, which lets the manufacturer know that you intended to unlock your device’s bootloader (which voids warranty) by provding them your phone’s IMEI number to get the key.
Below are full step by step installation instructions for both the methods discussed above. So proceed with whatever method you think is best. In our opinion, go with the Flashtool method. It’s much easier to unlock bootloader using Flashtool.
You’ll void the warranty of your Sony Xperia Z3 by unlocking its bootloader.
Back up your important data!
Every single file on your device will be deleted once you unlock the bootloader. So make sure you back up all your important data before proceeding with the guide given below and also make sure to move your back up files to your PC or Cloud storage because even any backup file kept on the phone will be deleted.
Check out the link below if you need any help with backing up your device.
Method 1 – Unlock Bootloader using Flashtool
Flashtool is a multi utility program for Xperia devices that does a lot of tasks in much easier ways compared to Sony’s official ways. Here in this guide we’ll be using flashtool only for the purpose of unlocking the bootloader.
Download and install Flashtool
Install Flashtool to the directory of your choice
Note: If you’re running a 64-bit windows installation then make sure you start the chúng tôi file
Instructions for unlocking bootloader using Flashtool
You’ll see a window asking you to connect your device in Flashmode. You can ignore the animated instruction on the screen as it’s not meant for the current generation of Xperia devices, instead follow the instructions given below to connect your Xperia Z3 to your PC in Flashmode
Switch off your phone
Now while holding down the Volume Down key on your phone connect it to PC using a USB cable
Your device should now be connected in Flashmode and Flashtool should show a ‘Device selector’ pop-up window
Select ‘Sony Xperia Z3’ from the list of devices in the ‘Device selector’ window
Method 2 – Unlock bootloader using Sony’s website
Unlocking bootloader using Sony’s website would require you to first get the unlock from Sony’s website and then run a couple of fastboot commands using command prompt on your PC.
Getting the bootloader unlock key from Sony’s website
└ You also check the IMEI number from ‘About device’ under Settings on your Xperia Z3. And you can also look for the IMEI number on the packaging box of the device, just make that you’ve have the original box.
Check for new mail on the E-mail address you provided in the form above with the subject line ‘Your requested unlock boot loader key’. Open the mail and you’ll see your bootloader unlock key.
Save your bootloader unlock key in your Notepad, a text file or anywhere you could remember and refer back quickly.
Unlocking bootloader using the Unlock Key
Now we’ll run some fastboot commands on your PC and for that you’ll need to download some fastboot files on your computer. Below is the download link:
Extract the fastboot file you downloaded from the link above and open the folder where you extract it
Now connect your phone in fastboot mode
Switch off your phone
Hold the Volume UP key on your phone and connect it to PC using a USB cable
On the command prompt window we opened in Step 2 type the command given below and hit enter. This is to verify that your device has connected properly (check the screenshot below for reference) fastboot.exe -i 0x0fce getvar version
Now you’re going to run the main bootloader unlock code. So make sure you’ve backed up your important data on the phone because once you unlock the bootloader every single file on your phone will be deleted
Paste/write the following command in the command prompt window. Do NOT hit enter yet
fastboot.exe -i 0x0fce oem unlock 0xKEY
Replace the last word in the command (KEY) with your bootloader unlock key that you received from Sony via E-mail. Your command should look like this fastboot.exe -i 0x0fce oem unlock 0x636FF374683A24EF
Important note! The key used in the command above is for illustration purpose only. You must NOT use this key. Every single device has its own unique bootloader unlocking key.
Hit enter once you’ve put your unique bootloader unlock key in place
When it comes to media streaming, there’s no better player than Kodi. It can stream everything from your boxset collection to live TV – a far cry from its humble beginnings on the original Xbox. As it’s cross-platform, you’ll have no problem installing it on your Linux PC.
Some Linux repositories already include Kodi as part of their software packages but not all. Here’s how to install Kodi on some of the most popular Linux distros.Ubuntu and Installing Kodi
Recent versions of Ubuntu have included Kodi as part of Ubuntu’s default software repositories. This means you can install it straight from the terminal without needing to add a new software repository first. All you have to do is open a terminal window and type:
If you’re looking for the most recent Kodi releases, you might want to install Kodi from the Team Kodi repositories instead. To do that, type:
If you’d rather get the most cutting edge version of Kodi (like beta releases or nightly builds), you’ll need the developer repositories.
Follow the instructions above and replace “ppa:team-xbmc/ppa” with either “ppa:team-xbmc/unstable” for beta releases or “ppa:team-xbmc/xbmc-nightly” for nightly builds with the most up-to-date fixes and features.
You can follow these instructions for other flavors of Ubuntu too, like Kubuntu, as well as distributions like Linux Mint.
If you’d rather install using a GUI, you can install Kodi from a snap package using the Ubuntu software catalog. Simply open the applications menu (bottom left) and type Kodi. You should see Kodi listed a result at the top. Hit it and it’ll take you to the software catalog.Debian and Installing Kodi
Ubuntu is based on Debian, so the instructions for installing on Debian are pretty similar. The simplest method is to use the Kodi version in the main Debian repository, assuming you’re running Stretch (Debian version 9) and above. Open a terminal and type:
These instructions will also work for Raspbian, the Debian-based distro for the Raspberry Pi.Fedora and Installing Kodi
Unlike Debian and Ubuntu, there’s no version of Kodi available for Fedora from an “official” repository. You’ll need to add the RPM Fusion repository first. To do that, open a terminal and type:
Locate the “SELINUX=enable” parameter and swap “enable” to “permissive.” Save, exit, and reboot once you’re done. With RPM Fusion available and SELinux set, you can now install Kodi. Type:
This will install Kodi using the latest available package.Arch and Installing Kodi
The Arch philosophy is all about customizing your Linux distribution to suit your needs. You won’t need to delve into the depths of Arch to install Kodi, however. Open your terminal and type:pacman
This will install the latest version of Kodi onto your Arch-running device. An extensive Kodi article on the Arch Wiki offers support and optimization tips for Kodi on Arch, as well as instructions for compiling Kodi yourself, should you need it.Stream Better with Kodi on Linux
With Kodi installed, you can start to move on to installing the best Kodi add-ons to transform it into the only media center you’ll ever need. The open-source, collaborative nature of its development has won Kodi plenty of fans, but there are some good Kodi alternatives to consider if it isn’t for you.
Ben is a UK based tech writer with a passion for gadgets, gaming, and general geekiness.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
With Git, developers can collaborate on projects and track their progress without interfering with each other.
This facilitates collaboration within a project and helps prevent confusion or code clashes among team members. An evolving project is tracked and saved as snapshots, effectively keeping a history of its development.
It is possible for users to communicate through the system once they install the software on their machines. Developers could collaborate over a centralized source (e.g., GitHub) where they can push and pull changes.
In this tutorial, I’ll show you how to install Git on a Mac.What is Git?
It is a version control technology that acts as a tracker for tracking changes. Git can be used to track changes made to source code files. It operates as a complete file-based system without the need for additional software. By using this technology, files can be reverted to their earlier versions. If you’re looking for a system that can easily recover files that have been deleted, then it’s a smart choice.
Another way of describing it is as a file change tracking system that can track even coded lines. You can use it to remove the files that have been added. A folder is created at the beginning of the process when utilizing this system. This folder contains all the details about the file. Using this folder, you can easily store data, which makes it easier to track any file. The Git folder is also referred to as a ‘repository’ in this system.Advantages of Git Processing is Fast
In comparison with other software or apps, it runs more quickly. With high speed, both server and local operations can be performed easily.Flexible
This system has flexible workflow operations. From the options available, one can select the workflow that suits one’s needs.Merging is Easy
It is possible to merge another code into the system. Developers can interact and contribute to each other’s work through this platform. During the merging process, there is no need to follow a lengthy procedure.Keeping it Simple and Fast
Connecting to the central server is not necessary. Having the local copy on the developer’s machine allows all the operations to be performed very quickly.Branching is Easy
It is easy and cheap to merge Git branches. A new branch is created every time you make a small change to your code.How to install Git on Mac?
Git can also be installed via the terminal using a few simple commands.Option 1: Install Git using the Mac Installer
Step 1. Open a browser and navigate to Git’s official website.
Step 2. When you enter the page, you will see the version number and a download button.
Step 5. Set up Git according to the setup guide. Version control systems should be left in their default settings if you are new to them.
Step 6. When prompted, enter your password when installing the program.Option 2: Install Git with Homebrew
Homebrew simplifies the installation of software on Apple’s operating system (macOS) using a free, open-source software package management system. It can be used to install any type of package you will need in the future, not just Git. It is extremely useful because of this.
Installing Homebrew does not require any applications or anything else. To install Homebrew, simply open the terminal and run these commands
Note − Your password will be requested once you enter the command.
As soon as that is complete, you can install Git in your terminal by using the command below$ brew install git
Upon successful installation, your Mac will have Git installed. You can verify by running the following command$ Git --version
One of the more underappreciated and unheard-of tools in the Microsoft Office suite is Microsoft Access. For those unaware, Access is a database management system that uses Microsoft’s Jet Database Engine. Databases created using this application are stored in their unique format, thus making them not readily accessible to everyone. While it is very easy to set this tool up on a Windows computer, the case is not the same on Macs.
Officially speaking, Microsoft Access is not available on the macOS. However, you can use a virtual machine on your Mac and run the tool’s Windows version there. Today, we will be discussing how you can install MS Access on Mac using a tool named VirtualBox.How to install Microsoft Access on Mac
For some, it can be a little confusing to understand what virtual machines like VirtualBox do. Essentially, these tools help you run different operating systems on top of existing operating systems, blend platforms that don’t coexist readily. Here, we will use VirtualBox to run Windows inside Mac and then run Access on that virtualized version of Windows.
Readers should note that all utilities of MS Office, except for Access, have official Mac versions of them. You don’t have to follow this process to run PowerPoint, or Excel on Mac, for example. Let’s begin!
First things first, you’re going to have to download a .iso file of Windows from chúng tôi An ISO file helps you create a bootable installation media or a virtual machine, as we will be doing here. Fill out the details i.e., the version of the OS, the language you prefer, bit version, etc., and confirm your download.
Here, type out a name to your virtual machine, select the version of your OS, and allocate the appropriate RAM space for it. Fill out the credentials of the hard disk drive you will be using for this process.
After that, you have to set up Windows on VirtualBox as you would do on a normal PC. Fill out all the details you’re instructed to and select the OS edition you want to install.
Your computer will boot once and that can take some time, depending on the specifications of your Mac, but after that, you’ll have to enter your Microsoft account’s credentials. Do so, wait a while and you’ll finally see an interface the same as in any Windows computer.
The process is pretty straightforward thereon out. Simply download Microsoft Office on your Windows now and open Access there.
If you feel that Windows is lagging on your VirtualBox setup, you can visit the Windows settings and check if there are any pending updates.
We hope that this post clarified all your doubts about VirtualBox on Mac and how you can use it with ease.
Read: How to download Microsoft Word, Excel, PowerPoint on MacCan you install Microsoft Access on a Mac?
No, Office for the MAC doesn’t include Access, and the only way to install Microsoft Access on a Mac is to use a Virtual Machine.Does Office 365 have Access for Mac?
No. Unfortunately, Microsoft Access is available only for Windows PCs. But you can use a virtual machine to run it.
The intelligent voice assistant app – S Voice – that debuted on the Galaxy S3, while useful sometimes, is more of a gimmick than anything else. Google Now – introduced on Android 4.1 Jelly Bean – does a much better job of voice recognition based search as well as providing info on traffic, movie show times, weather, sports, etc automatically through information cards, as well as allowing offline voice dictation.
Now, those having a T-Mobile Galaxy S3 can disable S Voice on their device and install and make Google Now default instead of S Voice, thanks to a hack, so that whenever they double-tap the home button, Google Now will come up instead of S Voice. The guide below will walk you through the steps required to do so.
So, continue reading to find out how you can install Google Now on the T-Mobile Galaxy S3 and replace S Voice.
How to Install Google Now on T-Mobile Galaxy S3 and Replace S Voice
Part I: Installing Google Now
Make sure you have ClockworkMod recovery or TWRP recovery installed on the phone. You can use this guide to install ClockworkMod recovery.
Download Google Now. There are two versions – Online/Offline and Online-only. The online/offline version will install files required for offline voice typing/dictation, while the online-only version will not do so and will hence always require you to have a data connection. So choose any of them and download the necessary file.
Online/Offline version: Download Link
Online-only version: Download Link
Copy the file you downloaded in step 2 to the internal SD card on your phone.
In recovery, use the volume buttons to scroll up/down and the home button to select an option.
Select install zip from sdcard, then select choose zip from sdcard. Scroll to the Google Now file on the SD card (copied in step 3) and select it. Confirm installation by selecting Yes on the next screen.
After the installation is complete, go back to the main recovery menu and select reboot system now to reboot the phone.
One the phone boots up, make sure you have an app named “Google” in the apps drawer. This is the shortcut to run Google Now, but the procedure is not yet over, so continue on to the next part where we’ll enable Google Now.
Part II: Activating Google Now
Make sure you have Latitude installed on the phone. If you have Google’s Maps app installed, then Latitude should be installed as well. If not, install Maps from the Play Store.
Now, Google Now is activated on your phone. You can stop following the procedure here, but if you want to replace S Voice with Google Now when the home key is pressed twice, continue on to the third part.
Part III: Replacing S Voice with Google Now
Open S Voice on the phone, go into its settings, and uncheck the “Launch S Voice” option.
Download the “Home2 Shortcut” app from the Play Store → here (or from your phone’s Play Store app).
Now, double press the home button and the Google Now app will start up.
Reboot the phone.
That’s it, Google Now is now installed on your phone and will also come up whenever you double press the home button (if you followed Part III). Do let us know how it works!
Update the detailed information about Install Lewa Os On Xperia Arc on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!