You are reading the article Latest Twrp Recovery For Metropcs Galaxy S3 (Android 4.4 Compatible!) updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Latest Twrp Recovery For Metropcs Galaxy S3 (Android 4.4 Compatible!)
Even though MetroPCS variant of Galaxy S3 is somewhat lesser known than it’s brothers, it shares the same development base (kinda).
Recently, Team Win has pushed an update for their famous and most user friendly recovery which promises to be scarce of the recovery in-compatibility issue with KitKat ROMs.
The latest version of TWRP Recovery will be fully functional with all the Android 4.4 ROMs like CyanogenMod 11, OmniRom, SLimKat, etc. They should now not give the ‘set metadata recursive’ error.
At the time of posting, the latest version of TWRP for the MetroPCS Galaxy S3 SCH-R350, is 2.6.3.0.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page!
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SCH-R530!
Note that this post is intended only for MetroPCS carrier of SCH-R530 model and not for Cricket and US Cellular carriers.
Please know that this page is meant only for Samsung Galaxy S3, model no. SCH-R530. Please DO NOT try the procedures given here on other variants of the Galaxy S3: GT-I9300/GT-I9305, or the S4 sets at US Cellular, Verizon, Sprint, and others who have different model no.
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install TWRP Recovery on your MetroPCS Galaxy S3 in order to avoid any complications later, and have a smooth and successful process.
BACK UP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
INSTALL GALAXY S3 DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash TWRP Recovery on your Samsung Galaxy S3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 on your computer.
► SAMSUNG GALAXY S3 DRIVERS INSTALLATION GUIDE
CHARGE YOUR DEVICESIf your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.
OTHER THINGS TO TAKE CARE OF:└ Use original USB cable to connect your phone to PC.
└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.
EXAMPLE VIDEO
If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.
Btw, the video below shows installing the the CWM (Yes, not TWRP) recovery on Samsung Galaxy S3, but as the process is exactly same, it doesn’t matter.
GUIDE: SAMSUNG GALAXY S3 TWRP RECOVERY
DOWNLOADS
Download the file given below and save them in a separate folder on your computer (just to keep things tidy, that is).
File name: samsung-galaxy-s3-metropcs-twrp-odin.zip (7.2 MB)
STEP-BY-STEP GUIDE
Extract/Unzip the TWRP Recovery file, samsung-galaxy-s3-metropcs-twrp-odin.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
Odin3 v3.09.exe
Odin3.ini
openrecovery-twrp-2.6.3.0-d2mtr.tar
Disconnect the Galaxy S3 from PC if it is connected.
Boot your MetroPCS Galaxy S3 into Download Mode: (The image below of Galaxy Note 2 would help)
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some
troubleshooting tips
:
Make sure you have installed driver for Galaxy S3 as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the recovery file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Feedback Us!
It was easy, right? Let us know what you plan to do now, with latest TWRP Recovery installed. Looking to install Android 4.4 KitKat maybe, eh?
Suggestions are most welcomed!
You're reading Latest Twrp Recovery For Metropcs Galaxy S3 (Android 4.4 Compatible!)
Android 5.1.1 Twrp Recovery For Sprint Galaxy S6 Edge
Cheers Sprint S6 Edge users! The much coveted TWRP recovery is finally available for your device, and it’s fully working on 5.1.1 update on Sprint S6 Edge. Even the latest OFE update is not an issue.
This trips KNOX! Installing the TWRP recovery will void your device’s warranty, as it will trip the KNOX flag you see in Odin/download mode, from 0x0 to 0x1. But if you want TWRP recovery, and easy root solution, and Xposed and Titanium backup, then go for it! Credit for the working 5.1.1 TWRP recovery goes to ram9200, thanks a lot!
Installing the TWRP on 5.1.1 update on your S6 Edge at Sprint is easy. It involves one simple flash from Odin PC software. With TWRP recovery, you can create full nandroid backup of your device, so that in case you mess up with the device, you can always restore the backup to get back to exact state of the phone at the time of backup.
It’s good to see TWRP getting released for 5.1.1 update now. Btw, we already had TWRP for international Galaxy S6 and S6 Edge variants, G925F and G925i, and the T-Mobile Galaxy S6 Edge.
If your Sprint S6 Edge is still running Android 5.0 build, then get TWRP here.
Supported devices
SPRINT GALAXY S6 EDGE, model no. SM-G925P
Don’t try on any other Galaxy S6 or S6 Edge set!
Don’t try on any other device whatsoever!
Instructions
Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Download the Odin software and TWRP recovery file from above.
Disable Reactivation lock. This is very important! For this:
Enable OEM Unlocking. It’s important and you need this to be able to flash anything on your S6/S6 Edge (not all S6 sets have this, btw) using Odin software after Android 5.1.1 update. Do this:
Go back to settings, and tap on ‘Developer options’.
Now, find the ‘OEM unlocking’ option, and use its toggle button to enable it. → If you don’t find this option, then that’s okay, no need to worry about it, just proceed to next step. Because, only some devices, mainly the sets in USA, have got it. It’s good to not have it anyway.
Disconnect your Sprint S6 Edge from PC if it is connected.
Boot Sprint S6 Edge into download mode:
Power off your Sprint S6 Edge. Wait 6-7 seconds after screen goes off.
Press and hold the three buttons Volume down + Power + Home together until you see warning screen.
Press Volume Up to continue to download mode.
Extract the Odin file. You should get this file, Odin3 chúng tôi (other files could be hidden, hence not visible).
Connect your Galaxy S6 Edge to PC now using USB cable. Odin should recognize your S6 Edge. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).
If Odin gets stuck at setup connection, then you need to do steps 4 to 10 again. For this, close Odin, disconnect your S6 Edge, remove battery, insert it back after 5-6 seconds and then start from step 6 again.
That’s it. You can press and hold Power + Home + Volume up buttons together after hitting the START button above, so that it reboots you directly into TWRP recovery, and you can confirm the installation. Anyway, when you device is on, simply power it off, and then use this combination to boot into recovery mode and check it out.
Twrp Recovery For Samsung Galaxy Light Sgh
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: INSTALL TWRP ON SAMSUNG GALAXY LIGHT SGH-T399
Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
Please know that this page is meant only for Samsung Galaxy Light. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully flash recovery on your Samsung Galaxy Light.
In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.
► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the files given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).
TWRP RECOVERY TAR FILEFor latest version of the file, check the original development page →
ODIN ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the TWRP Recovery, which might delete internal sd card too, your files will remain safe on PC.
Extract
/Unzip the Odin
zip file
, Latest Odin_ v3.09.zip on your computer (using 7-zip free software, preferably) to get the following files:
Odin3 v3.09.exe
Odin3.ini
Odin3 v3.09.exe
Odin3.ini
openrecovery-twrp-2.7.1.0-gardaltetmo.tar.md5
Disconnect the Galaxy Light from PC if it is connected.
Boot your Galaxy Light SGH-T399 into Download Mode:
Power off your phone first. Wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Light as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot your phone and PC and then try again.
Load the recovery file in .tar form into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps. (Step 7 and Step 8)
When you get PASS! message, your device will restart automatically. You can then disconnect your phone from PC.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Light from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Light from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.
NOTE: It may happen that your phone doesn’t automatically boot into recovery. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:
Pull out the battery and re-insert it.
Boot your Galaxy Light into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.
FEEDBACK US!
Your suggestions and queries, if any, are most welcomed!
Get Sprint Galaxy S3 Android 4.4 Kitkat Update With Baked Kitkat Rom
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings.Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SPH-L710!
Please know that this page is meant only for Sprint Galaxy S3. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY
Skip this step if you already have latest version of CWM or TWRP recovery installed on your device.
Make sure that you’ve latest version of the recovery installed on your device.
► LATEST CWM RECOVERY INSTALLATION GUIDE
► LATEST TWRP RECOVERY INSTALLATION GUIDE
Older versions of CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the file given below and transfer it to a separate folder on your phone and remember the location.
ROM FILEFor latest version of the ROM, check the original page →
GAPPS FILEBe sure to transfer the ROM and Gapps files you downloaded above to your phone and remember the location of the files.
You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.
We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.
GUIDE FOR FLASHING ROM IN CWM RECOVERY
Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:
Power off your device and wait for 4-5 seconds after lights go off.
└ In recovery, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For this:
Go to Backup And Restore » Backup.
Perform a full clean-up of the device (this will delete all apps and their settings and game progress). For this:
Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).
Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.
First Install the ROM file:
Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file.
└ Make sure to first flash the ROM file and then the Gapps file.
Reboot your device. For this, go back to the main menu of recovery and select reboot system now.
That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
GUIDE FOR TWRP RECOVERY USERS
Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:
Power off your device and wait for 4-5 seconds after lights go off.
Hold the Volume Up + Home + Power button together, release it as soon as you see the Samsung logo. Then your device will reboot into recovery mode.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For this:
Go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.
Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:
Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).
First Install the ROM file:
└ Make sure to first flash the ROM file and then the Gapps file.
Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
FEEDBACK US!
Your suggestions and queries, if any, are most welcomed!
Twrp Recovery V2.8.7.0 For Android One Sprout Devices!
The latest TWRP recovery v2.8.7.0 is now available for Android One devices, whose codename is Sprout. TWRP team introduced some really good features with the version 2.8.7.0, including recovery’s ability to detect a completely unmodified system, and allows you to mount the system as Read-only. This is helpful, as you can create a backup of stock system now, completely in unmodified form, and restore it later on to make your device compatible with OTA updates.
You need to unlock your Android One device in order to to be able to install TWRP recovery. If you haven’t already, then don’t worry as we have covered that in our guide below.
With TWRP, you can easily root your Android One device. All you need to do to root is flash the SuperSU file using TWRP, and that would be it.
How to Install TWRP Recovery on Android One
→ If you have a CWM/TWRP recovery currently installed on your Android One (Sprout) device, you can simply flash the above zip from that recovery, and the latest TWRP v2.8.7.0 will be installed on your device. In this case, don’t follow the guide below.
Supported devices
Android One devices, code name SPROUT
Don’t try this one any other device!
Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
Install ADB and Fastboot drivers.
On your device, enable USB debugging. For this:
Go back to Settings, then choose ‘Developer options’. Find the ‘USB debugging’ option and use its toggle button to enable it. Accept warning by tapping on OK button.
If you don’t get this, it means drivers aren’t installed properly. So, search for and install the drivers of your device manufacturer. Here are drivers for Micromax Android One device. Keep the device connected to PC.
Download the TWRP recovery file (TWRP-2.8.7.0_Sprout-M8.zip) from above.
Extract the zip file to get chúng tôi file.
Now, open command window in the folder in which you have the chúng tôi file. For this:
You will see a command window open up, with location directed to folder where you have the TWRP’s chúng tôi file.
With device connected to PC, boot your device into bootloader mode. For this, run the following command. (You can copy paste the command, and then hit enter key to run it.) adb reboot bootloader
Test whether fastboot is working alright. In the command window by running the following command. fastboot devices
→ Upon this, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.
If your device is not bootloader locked, then do this to unlock bootloader of it. Skip this step if shows unlocked at the bottom of bootloader mode screen.
Run the following command first. fastboot oem unlock
Now, look at device’s screen, and press Volume up button to choose Yes. (Upon doing this, your device’s all apps and data will be deleted.)
Flash TWRP recovery v2.8.7.0 now. Use the following command for that. fastboot flash recovery recovery.img
When done simply reboot your device using the following command. fastboot reboot
If you wish to check out the new TWRP recovery, v2.8.7.0, then with device connected to PC, run the following command. adb reboot recovery
[Optional] You will see TWRP recovery, v2.8.7.0. Now, you should create a full backup of your phone, including system partition. In TWRP, tap on Backup, and then select all partitions. Then do the swipe action at bottom to start the backup process. When done, restart your device.
Have fun flashing custom ROMs, creating nandroid backup, etc. stuff. You can use TWRP recovery to transfer files too, just keep that USB debugging option enabled, as we did in the step no. 3 above.
In case you flash something wrong on your device, and it hangs on boot logo or animation, resulting into bootloop, then you use TWRP recovery to set things right. Just download any custom ROM for your device, and after rebooting to TWRP, transfer it to your device. Then use Install option in recovery to flash the ROM. This will install a working ROM fully, and make your device reboot properly.
Happy flashing!
Here Is Latest Lg Optimus G Twrp Recovery V2.8.7.0
If you are still rocking an Optimus G Android phone from LG, then you are gonna feel a little bit of proud today that your device is still so loved by developers. How else does the original G — from which awesome devices like LG G3 and G4 descend — still get latest and greatest version of TWRP recovery? Well, you have to, have to thank for this.
TWRP recovery’s latest version v2.8.7.0 is much sought after, not only because of great features it adds to our favorite custom recovery, but also because of its sole feature of keeping system mounted as read-only — provided it does gets system as read-only — until we ask the recovery to make system read-write. This allows one to create a backup of stock system, and make device quickly compatible with OTA updates which require stock system, when restored.
While Optimus G is a pretty old device now — more than 3 years if you were wondering — the fact that it got the latest version of TWRP also shows how popular device has been its faithfuls, and developers alike. Btw, once you have TWRP recovery, it gets darn easier to root your device using SuperSU.
Over CWM, we would prefer TWRP recovery anytime. As it’s way easy to use, and packs in lots of extra cool features. Yep, Philz recovery provides ample competition, which is good, but having latest TWRP beats every other recovery out there.
The TWRP is compatible with both E975 and F180x devices (F180, F180S, F180K and F180L). Hence, don’t try this one any other Optimus G devices than E975 and F180x.
How to Install TWRP Recovery on LG Optimus G
Supported devices
LG Optimus G, model no. E975 and F180x (F180, F180S, F180K and F180L)
Don’t try this one any other device!
Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
Install ADB and Fastboot drivers.
Install LG Optimus G drivers. (G4’s drivers are latest, hence linked here.)
On your device, enable USB debugging. For this:
Go back to Settings, then choose ‘Developer options’. Find the ‘USB debugging’ option and use its toggle button to enable it. Accept warning by tapping on OK button.
If you don’t get this, it means drivers aren’t installed properly.
Download the TWRP recovery file (opt-g-recovery.img) from above.
Now, open command window in the folder in which you have the chúng tôi file. For this:
You will see a command window open up, with location directed to folder where you have the TWRP’s chúng tôi file.
With device connected to PC, boot your device into bootloader mode. For this, run the following command. (You can copy paste the command, and then hit enter key to run it.) adb reboot bootloader
Test whether fastboot is working alright. In the command window by running the following command. fastboot devices
→ Upon this, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.
Flash TWRP recovery v2.8.7.0 now. Use the following command for that. fastboot flash recovery opt-g-recovery.img
When done simply reboot your device using the following command. fastboot reboot
If you wish to check out the new TWRP recovery, v2.8.7.0, then with device connected to PC, run the following command. adb reboot recovery
[Optional] You will see TWRP recovery, v2.8.7.0. Now, you should create a full backup of your phone, including system partition. In TWRP, tap on Backup, and then select all partitions. Then do the swipe action at bottom to start the backup process. When done, restart your device.
That’s it. You are good to hunting for latest custom ROMs available for your Optimus G. You can use TWRP recovery to transfer files too, just keep that USB debugging option enabled, as we did in the step no. 3 above.
In case you anything not-compatible or buggy gets installed on your Optimus G, resulting in bootloop, with device hanging on boot animation or logo, you cna fix this using TWRP recovery. Just download any good working custom ROM for your device, and after rebooting to TWRP, transfer it to your device. Then use Install option in recovery to flash the ROM. This will install a working ROM fully, and make your device reboot properly.
Happy flashing!
Update the detailed information about Latest Twrp Recovery For Metropcs Galaxy S3 (Android 4.4 Compatible!) on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!