Trending March 2024 # Oneplus X Twrp Recovery # Suggested April 2024 # Top 11 Popular

You are reading the article Oneplus X Twrp Recovery updated in March 2024 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Oneplus X Twrp Recovery

The recently launched OnePlus X, a semi-budget device from the makers of the original Flagship killer, has now gotten itself an unofficial build of TWRP recovery.

Since this is an unofficial build of TWRP recovery for the OnePlus X, don’t expect it to be fully functional. However, the basics of TWRP recovery like flashing a zip file, taking nandroid backup and using MTP while in recovery, of course works well even on this early and unofficial OnePlus X TWRP build.

What you need to get TWRP recovery installed on your OnePlus X is just an unlocked bootloader, which is very likely supported under your device’ warranty, thanks to the humble warranty policy OnePlus usually follows for its devices.

Supported devices

OnePlus X, codename onyx

Don’t try this one any other device with codename different than above!

Important: Check your device’s codename  on free Android app called Droid Info. If you see the codename mentioned above in the app, then use this recovery, otherwise not. BTW, you can check codename device’s packaging box too.

Warning!

Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup!

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

Step-by-step Guide

Step 1. Unlock bootloader of your OnePlus X. For this, use the procedure given at our Nexus 6P bootloader unlock guide, as the procedure is exactly same.

[Note: In

step 4

of the guide linked above, use the combination Volume Up + Power button to boot into bootloader mode.]

[Note: Inof the guide linked above, use the combination Volume Up + Power button to boot into bootloader mode.]

Step 2. Install ADB drivers.

Step 3. On your OnePlus X, enable USB debugging. For this:

Go back to Settings, then choose ‘Developer options’. Find the ‘USB debugging’ option and use its toggle button to enable it. Accept warning by tapping on OK button.

Step 4. Connect your OnePlus X to PC now. You will get a pop-up as shown below on your phone when you connect for the first time after enabling USB debugging. Select ‘Always allow from this computer’ checkbox and then tap on OK button.

Step 5. Download the OnePlus X TWRP recovery from above.

Step 6. Rename the recovery file, from chúng tôi to a simple one, chúng tôi

Step 7. Now, open command window in the folder where you have the chúng tôi file. For this:

Now choose Open command window here option from that.

You will see a command window open up, with location directed to folder where you have the twrp recovery file.

Step 8. Boot your OnePlus X into Bootloader/Fastboot mode:

Power off your device and wait for 3-4 seconds after screen goes off.

Press and hold Power and Volume Up together for 3 seconds and then let go. You’ll enter bootloader mode, also called Fastboot mode.

Step 9. Test whether fastboot is working alright. For this, run the command given below. (You can also copy paste the command and then use enter key to run it.)

→ Upon running command below, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.

fastboot devices

Step 10. Flash OnePlus X TWRP recovery now. Use the following command for that.

fastboot flash recovery onyx-twrp.img

Step 11. TWRP recovery will now be installed on your OnePlus X. When done, reboot into recovery mode. For this, use the following command.

fastboot boot onyx-twrp.img

Alternative way to reboot into recovery mode is to power off the device first. And then press and hold Volume down + power button fo 4-5 seconds.

Happy flashing!

Need Help?

Via oneplusbbs

You're reading Oneplus X Twrp Recovery

Huawei Honor Shotx (7I) Twrp Recovery 3.0

Here is the TWRP recovery for Huawei Honor Shot X (mode 7i, not regular Honor 7, mind you!) which is great tool if you are interested in installing custom ROMs (Marshmallow or not), nandroid backups, and don’t mind your device’s warranty getting broke due to that. The recovery version available is TWRP 3.0, the latest one.

Installing the recovery is easy. First you need to unlock bootloader of your device (see the page linked in guide below for help with this) and then you can go on and install TWRP recovery using the rest of the guide below.

With TWRP installed on your Honor Shot X, root the device would be easy too. We’ve provided helpful link for that in our guide too.

With the TWRP recovery, you can create a backup of your device, that is pretty solid and when restored, can fix even a soft-bricked devices. TWRP backup is kind of the best backup solution available.

Moreover, you can easily install custom ROMs and mods to customize your Honor 7i easily. Though, there must be some custom ROMs available in the first place, specifically made for your device.

TWRP Recovery — Link

Supported devices

Honor Shot X (7i)

Don’t try this one any other device!

Important: Check your device’s codename  on free Android app called Droid Info. If you see the codename mentioned above in the app, then use this recovery, otherwise not. BTW, you can check codename device’s packaging box too.

Warning!

Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup!

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

Step-by-step Guide

Step 1. Unlock bootloader of your Honor Shot X (7i). For this, use the procedure given at this page for this.

Step 2. Install ADB and Huawei drivers.

Step 3. On your Honor Shot X (7i), enable USB debugging. For this:

Go back to Settings, then choose ‘Developer options’. Find the ‘USB debugging’ option and use its toggle button to enable it. Accept warning by tapping on OK button.

Step 4. Connect your Honor Shot X (7i) to PC now. You will get a pop-up as shown below on your phone when you connect for the first time after enabling USB debugging. Select ‘Always allow from this computer’ checkbox and then tap on OK button.

Step 5. Download the Honor Shot X (7i) TWRP recovery from above.

Step 6. Rename the recovery file to a simple one, chúng tôi

Step 7. Now, open command window in the folder where you have the chúng tôi file. For this:

Now choose Open command window here option from that.

You will see a command window open up, with location directed to folder where you have the twrp recovery file.

Step 8. Boot your Honor Shot X (7i) into Bootloader/Fastboot mode. Run the following command for that.

adb reboot bootloader

Step 9. Test whether fastboot is working alright. For this, run the command given below. (You can also copy paste the command and then use enter key to run it.)

→ Upon running command below, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.

fastboot devices

Step 10. Boot into TWRP recovery now. We are not installing the TWRP recovery actually here, but will test it by loading it without installation. When we’re sure it’s working alright, we will install it. Use the following command to test run TWRP. (You have to use the recovery image’s filename in the above command.)

fastboot boot shotxtwrp3.img

After entering the above command, your Honor Shot X (7i) will reboot into recovery mode and will load TWRP recovery. If the recovery image is compatible and fully working that is. Otherwise, it will get stuck, in which case, simply force reboot it by holding power button (or Volume down + Power) for 20 seconds.

Step 11. If the TWRP recovery is working alright, and you are sure you want to install it permanently, then run the following two commands.

adb reboot bootloader

You will be back in fastboot mode. Run the following command to install TWRP.

fastboot flash recovery shotxtwrp3.img

To check out recovery, use the command we used earlier too (fastboot boot shotxtwrp3.img).

That’s it. You are done. Enjoy TWRP recovery on your Honor Shot X (Honor 7i).

Happy flashing!

How to Root Honor Shot X

To root your Honor Shot X (7i), simply install the SuperSU using TWRP recovery. Download the SuperSU 2.65 zip file, and then see our guide on how to root using TWRP for this.

How to access TWRP recovery on Huawei Honor Shot X

To access TWRP without command line and PC, just reboot into recovery mode using button combination on your device. Do this: power off your Honor Shot X first. And then press and hold Volume Up + Power button together until you see TWRP written (first Huawei logo will appear and then recovery).

Twrp Recovery For Samsung Galaxy Light Sgh

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: INSTALL TWRP ON SAMSUNG GALAXY LIGHT SGH-T399

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Please know that this page is meant only for Samsung Galaxy Light. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash recovery on your Samsung Galaxy Light.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the files given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

  TWRP RECOVERY TAR FILE

For latest version of the file, check the original development page →

  ODIN ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the TWRP Recovery, which might delete internal sd card too, your files will remain safe on PC.

Extract

/Unzip the Odin

zip file

, Latest Odin_ v3.09.zip on your computer (using 7-zip free software, preferably) to get the following files:

Odin3 v3.09.exe

Odin3.ini

Odin3 v3.09.exe

Odin3.ini

openrecovery-twrp-2.7.1.0-gardaltetmo.tar.md5

Disconnect the Galaxy Light from PC if it is connected.

Boot your Galaxy Light SGH-T399 into Download Mode:

Power off your phone first. Wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Light as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

Load the recovery file in .tar form into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps. (Step 7 and Step 8)

When you get PASS! message, your device will restart automatically. You can then disconnect your phone from PC.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Light from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Light from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

NOTE: It may happen that your phone doesn’t automatically boot into recovery. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:

Pull out the battery and re-insert it.

Boot your Galaxy Light into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Twrp Recovery V2.8.7.0 For Android One Sprout Devices!

The latest TWRP recovery v2.8.7.0 is now available for Android One devices, whose codename is Sprout. TWRP team introduced some really good features with the version 2.8.7.0, including recovery’s ability to detect a completely unmodified system, and allows you to mount the system as Read-only. This is helpful, as you can create a backup of stock system now, completely in unmodified form, and restore it later on to make your device compatible with OTA updates.

You need to unlock your Android One device in order to to be able to install TWRP recovery. If you haven’t already, then don’t worry as we have covered that in our guide below.

With TWRP, you can easily root your Android One device. All you need to do to root is flash the SuperSU file using TWRP, and that would be it.

How to Install TWRP Recovery on Android One

→ If you have a CWM/TWRP recovery currently installed on your Android One (Sprout) device, you can simply flash the above zip from that recovery, and the latest TWRP v2.8.7.0 will be installed on your device. In this case, don’t follow the guide below.

Supported devices

Android One devices, code name SPROUT

Don’t try this one any other device!

Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

Install ADB and Fastboot drivers.

On your device, enable USB debugging. For this:

Go back to Settings, then choose ‘Developer options’. Find the ‘USB debugging’ option and use its toggle button to enable it. Accept warning by tapping on OK button.

If you don’t get this, it means drivers aren’t installed properly. So, search for and install the drivers of your device manufacturer. Here are drivers for Micromax Android One device. Keep the device connected to PC.

Download the TWRP recovery file (TWRP-2.8.7.0_Sprout-M8.zip) from above.

Extract the zip file to get chúng tôi file.

Now, open command window in the folder in which you have the chúng tôi file. For this:

You will see a command window open up, with location directed to folder where you have the TWRP’s chúng tôi file.

With device connected to PC, boot your device into bootloader mode. For this, run the following command. (You can copy paste the command, and then hit enter key to run it.) adb reboot bootloader

Test whether fastboot is working alright. In the command window by running the following command. fastboot devices

→ Upon this, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.

If your device is not bootloader locked, then do this to unlock bootloader of it. Skip this step if shows unlocked at the bottom of bootloader mode screen.

Run the following command first. fastboot oem unlock

Now, look at device’s screen, and press Volume up button to choose Yes. (Upon doing this, your device’s all apps and data will be deleted.)

Flash TWRP recovery v2.8.7.0 now. Use the following command for that. fastboot flash recovery recovery.img

When done simply reboot your device using the following command. fastboot reboot

If you wish to check out the new TWRP recovery, v2.8.7.0, then with device connected to PC, run the following command. adb reboot recovery

[Optional] You will see TWRP recovery, v2.8.7.0.  Now, you should create a full backup of your phone, including system partition. In TWRP, tap on Backup, and then select all partitions. Then do the swipe action at bottom to start the backup process. When done, restart your device.

Have fun flashing custom ROMs, creating nandroid backup, etc. stuff. You can use TWRP recovery to transfer files too, just keep that USB debugging option enabled, as we did in the step no. 3 above.

In case you flash something wrong on your device, and it hangs on boot logo or animation, resulting into bootloop, then you use TWRP recovery to set things right. Just download any custom ROM for your device, and after rebooting to TWRP, transfer it to your device. Then use Install option in recovery to flash the ROM. This will install a working ROM fully, and make your device reboot properly.

Happy flashing!

Android 5.1.1 Twrp Recovery For Sprint Galaxy S6 Edge

Cheers Sprint S6 Edge users! The much coveted TWRP recovery is finally available for your device, and it’s fully working on 5.1.1 update on Sprint S6 Edge. Even the latest OFE update is not an issue.

This trips KNOX! Installing the TWRP recovery will void your device’s warranty, as it will trip the KNOX flag you see in Odin/download mode, from 0x0 to 0x1. But if you want TWRP recovery, and easy root solution, and Xposed and Titanium backup, then go for it! Credit for the working 5.1.1 TWRP recovery goes to ram9200, thanks a lot!

Installing the TWRP on 5.1.1 update on your S6 Edge at Sprint is easy. It involves one simple flash from Odin PC software. With TWRP recovery, you can create full nandroid backup of your device, so that in case you mess up with the device, you can always restore the backup to get back to exact state of the phone at the time of backup.

It’s good to see TWRP getting released for 5.1.1 update now. Btw, we already had TWRP for international Galaxy S6 and S6 Edge variants, G925F and G925i, and the T-Mobile Galaxy S6 Edge.

If your Sprint S6 Edge is still running Android 5.0 build, then get TWRP here.

Supported devices

SPRINT GALAXY S6 EDGE, model no. SM-G925P

Don’t try on any other Galaxy S6 or S6 Edge set!

Don’t try on any other device whatsoever!

Instructions

Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Download the Odin software and TWRP recovery file from above.

Disable Reactivation lock. This is very important! For this:

Enable OEM Unlocking. It’s important and you need this to be able to flash anything on your S6/S6 Edge (not all S6 sets have this, btw) using Odin software after Android 5.1.1 update. Do this:

Go back to settings, and tap on ‘Developer options’.

Now, find the ‘OEM unlocking’ option, and use its toggle button to enable it. → If you don’t find this option, then that’s okay, no need to worry about it, just proceed to next step. Because, only some devices, mainly the sets in USA, have got it. It’s good to not have it anyway.

Disconnect your Sprint S6 Edge from PC if it is connected.

Boot Sprint S6 Edge into download mode:

Power off your Sprint S6 Edge. Wait 6-7 seconds after screen goes off.

Press and hold the three buttons Volume down + Power + Home together until you see warning screen.

Press Volume Up to continue to download mode.

Extract the Odin file. You should get this file, Odin3 chúng tôi (other files could be hidden, hence not visible).

Connect your Galaxy S6 Edge to PC now using USB cable. Odin should recognize your S6 Edge. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.

If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).

If Odin gets stuck at setup connection, then you need to do steps 4 to 10 again. For this, close Odin, disconnect your S6 Edge, remove battery, insert it back after 5-6 seconds and then start from step 6 again.

That’s it. You can press and hold Power + Home + Volume up buttons together after hitting the START button above, so that it reboots you directly into TWRP recovery, and you can confirm the installation. Anyway, when you device is on, simply power it off, and then use this combination to boot into recovery mode and check it out.

Here Is Latest Lg Optimus G Twrp Recovery V2.8.7.0

If you are still rocking an Optimus G Android phone from LG, then you are gonna feel a little bit of proud today that your device is still so loved by developers. How else does the original G — from which awesome devices like LG G3 and G4 descend — still get latest and greatest version of TWRP recovery? Well, you have to, have to thank  for this.

TWRP recovery’s latest version v2.8.7.0 is much sought after, not only because of great features it adds to our favorite custom recovery, but also because of its sole feature of keeping system mounted as read-only — provided it does gets system as read-only — until we ask the recovery to make system read-write. This allows one to create a backup of stock system, and make device quickly compatible with OTA updates which require stock system, when restored.

While Optimus G is a pretty old device now — more than 3 years if you were wondering — the fact that it got the latest version of TWRP also shows how popular device has been its faithfuls, and developers alike. Btw, once you have TWRP recovery, it gets darn easier to root your device using SuperSU.

Over CWM, we would prefer TWRP recovery anytime. As it’s way easy to use, and packs in lots of extra cool features. Yep, Philz recovery provides ample competition, which is good, but having latest TWRP beats every other recovery out there.

The TWRP is compatible with both E975 and F180x devices (F180, F180S, F180K and F180L). Hence, don’t try this one any other Optimus G devices than E975 and F180x.

How to Install TWRP Recovery on LG Optimus G

Supported devices

LG Optimus G, model no. E975 and F180x (F180, F180S, F180K and F180L)

Don’t try this one any other device!

Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

Install ADB and Fastboot drivers.

Install LG Optimus G drivers. (G4’s drivers are latest, hence linked here.)

On your device, enable USB debugging. For this:

Go back to Settings, then choose ‘Developer options’. Find the ‘USB debugging’ option and use its toggle button to enable it. Accept warning by tapping on OK button.

If you don’t get this, it means drivers aren’t installed properly.

Download the TWRP recovery file (opt-g-recovery.img) from above.

Now, open command window in the folder in which you have the chúng tôi file. For this:

You will see a command window open up, with location directed to folder where you have the TWRP’s chúng tôi file.

With device connected to PC, boot your device into bootloader mode. For this, run the following command. (You can copy paste the command, and then hit enter key to run it.) adb reboot bootloader

Test whether fastboot is working alright. In the command window by running the following command. fastboot devices

→ Upon this, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.

Flash TWRP recovery v2.8.7.0 now. Use the following command for that. fastboot flash recovery opt-g-recovery.img

When done simply reboot your device using the following command. fastboot reboot

If you wish to check out the new TWRP recovery, v2.8.7.0, then with device connected to PC, run the following command. adb reboot recovery

[Optional] You will see TWRP recovery, v2.8.7.0.  Now, you should create a full backup of your phone, including system partition. In TWRP, tap on Backup, and then select all partitions. Then do the swipe action at bottom to start the backup process. When done, restart your device.

That’s it. You are good to hunting for latest custom ROMs available for your Optimus G. You can use TWRP recovery to transfer files too, just keep that USB debugging option enabled, as we did in the step no. 3 above.

In case you anything not-compatible or buggy gets installed on your Optimus G, resulting in bootloop, with device hanging on boot animation or logo, you cna fix this using TWRP recovery. Just download any good working custom ROM for your device, and after rebooting to TWRP, transfer it to your device. Then use Install option in recovery to flash the ROM. This will install a working ROM fully, and make your device reboot properly.

Happy flashing!

Update the detailed information about Oneplus X Twrp Recovery on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!