You are reading the article Try Connecting Your Device Again Bluetooth Error In Windows 11 updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Try Connecting Your Device Again Bluetooth Error In Windows 11
Some users have been complaining that when trying to connect a Bluetooth device to their Windows 11 PC, they receive an error, Try connecting your device again. While this error may appear for any user at any random time, the Bluetooth issue mainly occurs in PCs with freshly installed Windows 11.What causes the Bluetooth error in Windows 11?
One of the primary reasons you may encounter the error message, “Try connecting your device again” is if you have not enabled Bluetooth. So, before you proceed with the root cause analysis, you may want to check if Bluetooth is enabled in Windows 11.
Among the other causes that may lead to this Bluetooth error are:
If the Bluetooth support service is not running.
Due to corrupt Bluetooth drivers or outdated Intel Chipset drivers.
Outdated BIOS version.
Interference by other connected Bluetooth devices.
A glitch with the Bluetooth functioning of your system.Fix ‘Try connecting your device again’ Bluetooth Error in Windows 11
Before you proceed to follow the solutions, we recommend you restart your PC, turn Bluetooth Discovery Off/On for your PC/device, and see if that helps. If that does not, then follow these suggestions:
Connect the Wi-Fi antenna
Remove and reconnect your device
Enable Bluetooth Support Service
Run Windows Bluetooth troubleshooter
Update the Intel chipset driver
Reinstall the Bluetooth driver
Update BIOS1] Connect the Wi-Fi antenna
This method is a user-tested solution and seems to have worked with most of the users facing the “Try connecting your device again” error.
Intel says that some Bluetooth chipsets use Wi-Fi antennas to function, so this method is applicable to only specific motherboards.
So, if it’s a new Windows 11 PC, check for the dedicated Wi-Fi antenna/s (could be a pair) in the box that came along.
Based on Intel’s description, the wireless adapters that need an antenna are Intel Wireless-AC 9260, Intel Dual Band Wireless-AC 8265, and Intel Dual Band Wireless-AC 8265 Desktop K.
Read: Bluetooth devices not showing, pairing or connecting in Windows2] Remove and reconnect your device
In such a case, you must unpair the device and pair again to reset the device and also clear the Bluetooth cache in Windows 11:
Press the Win + I keys together to launch Windows Settings.
Now, restart your PC, open the Settings window again as shown in Step 1, and pair the device again.
Read: Bluetooth is not working in Windows 113] Turn on the Bluetooth service
In this case, you can turn on the Bluetooth support service as explained below:
Press the Win + R keys simultaneously to launch the Run dialog.
Type in chúng tôi in the search bar and hit Enter.
In the Properties dialog, under the General tab, go to Startup type and select Automatic.
Read: Fix Bluetooth connection problems in Windows 114] Run Windows Bluetooth troubleshooter
Run Windows Bluetooth troubleshooter and see if it helps you. You can access it via the Settings Troubleshooters Page or the Get Help app.5] Reinstall the Bluetooth drivers
In some cases, you may encounter this error in Windows 11 due to a corrupted Bluetooth driver. Hence, it’s recommended to update the Bluetooth drivers to their latest version or download it from the manufacturer’s website to fix the issue.
Visit the manufacturer’s website to download Bluetooth drivers for your device. Having done that, you have to uninstall your existing Bluetooth driver as follows:
To open the Run dialog, press the Win + R shortcut keys.
Now, type chúng tôi in the search box and hit Enter to open the Device Manager.
Now run the downloaded driver setup file to install the driver.
Read: Bluetooth device Paired but Not Connected6] Update the BIOS firmware
Also, in some cases, the Bluetooth error shows up due to outdated BIOS firmware. BIOS firmware comes pre-installed with the motherboard in the form of a chip.
Since it’s the first software to run as the PC boots up, it’s responsible for some basic hardware initialization.
This software (BIOS) controls the data flow between the PC and external devices like a hard disk, keyboard, mouse, etc., that includes Bluetooth devices.
However, for the proper functioning of Bluetooth devices, the BIOS firmware should be up-to-date with the latest drivers.
Therefore, make sure to update the BIOS firmware on your Windows 11 PC and get rid of the Bluetooth error. All OEM manufacturers have utilities that help you easily update BIOS, firmware, and drivers. Search for yours and download it from the official site only. This is the safest way to update the BIOS.
I hope something here helps you.
Read: Bluetooth is missing or not showing in Device Manager.How do I allow Bluetooth devices to connect to Windows 11?
To allow other Bluetooth devices to connect to your Windows 11 PC, make sure your PC supports Bluetooth and that it’s turned on:
Press the Win + I shortcut keys to open the Settings app.
Next, go to Bluetooth on the right and move the toggle to the right to turn it on.
Now, go to the taskbar, expand the system tray and here, you should see the Bluetooth icon.
Alternatively, you may also check if the Airplane mode is turned on or off, or if the antivirus is blocking the device.How to fix Bluetooth missing from Device Manager in Windows 11?
If Bluetooth is missing or not showing in Device Manager, first of all, we suggest you restart your computer and then if the problem disappears. If not, Run Bluetooth and Hardware & Devices Troubleshooter, Restart Bluetooth Support Service, Enable hidden devices in the Device Manager, Download the Bluetooth driver from the manufacturer’s website, Turn off Fast Startup, etc.
You're reading Try Connecting Your Device Again Bluetooth Error In Windows 11
YouTube is a popular platform where people can watch, share or create videos for their audiences, but sometimes users may receive a message – An error occurred, please try again later, when they are trying to play a popular video; this will prevent the videos from loading and can be an annoyance to users.Fix An error occurred, please try again later on YouTube
Follow the solutions below to fix the Youtube playback error:
Hard Reload your webpage on your browser
Restart your modem
Clear Browser Cache
Use a different browser
Flush the DNS cache of the server
Update your Graphics and Audio drivers
Change the video resolution
Surfing the internet for a long time might cause issues; You need to hard reload your webpage to get the proper internet speed to run the video properly.2] Restart your modem
A bad internet connection can cause issues; try to restart your modem and wait until the connection is restored after restarting the modem, then check if the error persists.3] Clear browser Cache
Cache and cookies can cause issues with your web; follow the steps below to clear cache and cookies from your browser.
Go to your web browser’s settings – we are using Edge here as an example.
Select Cached images and files checkbox
Then select Cookies and other site data checkbox.
Now select Clear.
Chrome & Firefox users may see these instructions to clear browser cache.4] Update browser
Again, we are using Edge as an example.
Then select About Microsoft Edge.
Edge will automatically check for updates.
Edge is now updated.5] Use a different browser
If the browser you are using is causing the error, use another browser and check if the issue still continues.6] Flush the DNS cache of the server
Flushing your DNS cache can solve this issue.
Open an administrative command prompt window as an administrator
Type ipconfig /flushdns and hit Enter
You should see – Windows IP Configuration. Successfully flushed the DNS Resolver Cache
Your DNS cache should have been reset.7] Update your Graphics and Audio drivers
Microsoft has now made it easier for you to discover the available Windows Feature Updates, monthly non-security quality updates, and driver updates. You will now no longer need to use the Device Manager to search for device driver updates. Consequently, the Device Manager will no longer search the internet for available updates. You will be able to use it only if you have the driver update file on your computer.
Follow one of the methods below to update your Graphics and Audio drivers:
You may check for Driver Updates via Windows Update to update your drivers
You may visit the manufacturer’s site to download the drivers.
Use a free driver update software
If you have the driver file already on your computer then:
Open Device Manager.
Select Update Driver.
Follow the on-screen wizard to finish updating your audio drivers.8] Change the video resolution
Follow the steps below to change the Youtube video resolution.
Enable the Allowed (Recommended) button.
Now check if the error persists.What is playback ID on YouTube?
In YouTube, a playback ID is a unique identifier for a specific video. It is used to identify the video when it is played back or accessed on the YouTube platform. The playback ID is a string of characters assigned to a video when uploaded to YouTube and cannot be changed. It is used to identify the video in various contexts, such as when it is embedded on a website or accessed through the YouTube API. The ID remains the same even if you change the video title. If you want to note down the ID, look at the string of characters that appears after the “v=” parameter in the URL.How do I fix an error on YouTube?
There are several methods to fix a youtube error.
Reload your webpage on your browser: If you surf the internet for a long time, it might trigger an error to occur.
Restart your modem: Poor internet connection cause the error to occur.
Clear Browser Cache: Clearing the browser cache and cookies will remove stored information that may be the cause of the Youtube error
Update browser: Your browser might be outdated and want to be updated.
Use different browsers: Try to switch to a current browser until the current browser is updated.
Flush the DNS cache of the server: DNS cache can cause the error.
Update your PC audio drivers: Outdated drivers can cause the error
Change the video resolution: Try changing the video’s resolution to fix the error.
In this post, we will list the possible solutions to fix Bluetooth audio stuttering in Windows 11/10. Audio stuttering is also called Sound distortion. There are several causes of this error, like corrupted or outdated drivers, frequency issues, etc. Some users have reported that the issue was fixed when they turned off their WiFi connection. This usually happens when the Bluetooth uses the same frequency as the WiFi signal does.Fix Bluetooth audio stuttering in Windows 11/10
If you are facing Bluetooth audio stuttering issue by connecting your Bluetooth audio device with Windows 11/10 computer, you can try the following solutions to fix the problem.
Run Bluetooth Troubleshooter.
Switch between WiFi bands.
Disable and re-enable the Audio Enhancements.
Reinstall the Bluetooth and WiFi drivers.
Set Roaming Aggressiveness to the Lowest value in the Wireless Network adapter properties.
Disable the Remote Control property of your Bluetooth device.
Disable Bluetooth Collaboration in Broadcom Network Adapter properties.
Use a USB cable.
Turn off the Bluetooth of other devices or unpair them.
Restart Bluetooth Support Service.
Let’s discuss all these solutions in detail.1] Run Bluetooth Troubleshooter
Because this issue is related to Bluetooth, running the Bluetooth Troubleshooter may fix it. To run the troubleshooter, you have to follow the steps given below:
Select Troubleshoot from the left side.
Now, select Additional troubleshooters from the right pane.
After the troubleshooting gets completed, see if the issue persists or not.2] Switch between WiFi bands
One main cause of the Bluetooth audio stuttering problem on Windows 11/10 is the interference issue. The interference issue generally occurs when the two wireless devices use the same frequency. In your case, it is possible that the frequency of your Bluetooth device and WiFi router is the same. To check it, you can turn off your WiFi router and see if it helps. If it works, it means that you are encountering this issue due to the Bluetooth and WiFi signal interference. This can be fixed by changing the frequency of your WiFi router.3] Disable and re-enable the Audio Enhancements
Windows 10 comes with Audio Enhancements feature that you can use to increase the sound quality of particular audio hardware. Sometimes, this feature causes some issues with the audio devices. If the above two solutions did not help you fix the issue, you can try this trick; disable the Audio Enhancements on your system and then re-enable them again.4] Reinstall the Bluetooth and WiFi drivers
You can also try reinstalling your Bluetooth device drivers. We have listed the steps for the same below:
In the Device Manager, expand the Bluetooth node.
After the uninstallation process gets completed, reboot your computer.
Windows will scan for the hardware changes on the restart and install the missing Bluetooth device driver automatically.
Now, check if the issue is fixed.
If the issue still persists, try reinstalling your WiFi device driver. According to some users, this trick fixed the Bluetooth audio stuttering problem on their system. The procedure to do this is the same as reinstalling the Bluetooth device driver. You will find your WiFi device driver in the Network adapters node.5] Set Roaming Aggressiveness to the Lowest value in the Wireless Network adapter properties
If reinstalling the Wireless Network adapter device driver did not fix the Bluetooth audio stuttering issue, try this trick.
Set Roaming Aggressiveness to the Lowest value in the Wireless Network adapter properties. Follow the instructions below:
Launch the Device Manager.
Expand the Network adapters node.
This may help.6] Disable the Remote Control property of your Bluetooth device
According to some users, the issue was fixed after disabling the Remote Control property of the Bluetooth device. The following instructions will guide you on how to do this.
Deselect the Remote Control checkbox.
If this does not work, try disabling the Handsfree Telephony Gateway in the Services tab.7] Disable Bluetooth Collaboration in Broadcom Network adapter properties
Broadcom Network adapter is a program developed by Broadcom. This software helps your device connect to the internet. Sometimes, it can also cause interference issues with Bluetooth devices. You can disable the Bluetooth Collaboration property of your Broadcom Network adapter and see if it helps. The steps to do this are as follows:
Launch Device Manager.
Expand the Network adapters node.8] Use a USB cable (for USB Bluetooth dongle users)
Sometimes, electrical interference issues occur on the motherboard’s Bluetooth module. This problem can be solved by increasing the distance between the USB Bluetooth dongle and the USB port of your computer. To do so, connect your USB Bluetooth dongle via a USB cable.9] Turn off the Bluetooth of other devices or unpair them
Using multiple Bluetooth devices, such as smartphones, BT audio devices, etc., connected to a particular device at the same time may sometimes cause the interference issue. To fix it, turn off the Bluetooth of your smartphone or other Bluetooth devices that you are not using currently. If this does not work, consider unpairing other Bluetooth devices.10] Restart Bluetooth Support Service
The issue may also occur if the Bluetooth Support Service is not running smoothly. You can try restarting the Bluetooth Support Service and see if it brings any changes.
The steps to do this are given below:
Launch the Run command box and type services.msc.
Find the Bluetooth Support Service.Why is my audio glitching on PC?
There are many reasons for which you may face audio glitching issues on your computer. Sometimes, audio glitching is caused due to corrupted or outdated audio drivers. Hence, updating the device drivers can fix the issue. If you are facing this issue with your Bluetooth speaker, you can try the solutions explained in this article.How do I reduce Bluetooth interference?
Sometimes the Bluetooth devices interfere with the other wireless devices that use the same frequency. This causes disturbance in the wireless signal, which prevents users from using their Bluetooth devices. If you experience interference issues with your Bluetooth devices, you can try the following things:
Sometimes, microwave devices can cause interference issues with other wireless devices. Hence, you should never place your Bluetooth gadgets near microwave devices.
Turn off your WiFi router while using the Bluetooth device. If possible, change the frequency of your WiFi router.
If you have more than one Bluetooth device connected to your laptop, turn off the Bluetooth of the devices that are currently not in use.
As should have been expected, Windows 11 seems to have inherited all the same issues that have plagued Windows 10 and all those that have come before it. Update Errors! So follow along as we guide you through the best known fixes for update error 0x800f020b. 0x800F020B -2146500085 SPAPI_E_No_Such_Devinst The device instance does not exist on Windows 11.
Related: How to fix Windows Upgrade Error Write 0x0000065e while gathering/applying Object.
Although Windows 11 is being hyped up as a brand new operating system from Microsoft, it’s basically just a refreshed version of Windows 10 with a few fancy tweaks and additions. As a result, a large portion of issues that plagued Windows 10 have found their way into Windows 11. As is typical of Windows, Windows 11’s most common error messages are update errors that occur at random.
The good news is that most of the old troubleshoot steps used on Windows 10 still work on Windows 11, though some of them are now found in different locations. Before you begin troubleshooting though, make sure have Restarted your computer and Internet modem/router. This will eliminate any potential networking errors that may be causing the issue. Once you have done completed those steps you can start the real troubleshooting process.
Run the Windows Update Troubleshooter to fix Windows Upgrade Error Write 0x0000065e.
To begin, the quickest and easiest way to solve error 0x0000065e is by running the Windows 11 Update Troubleshooter. This tool will check and fix any issues that it finds are preventing Windows 11 from updating. To use the Windows Update Troubleshooter, you’ll need to do the following.
After it completes, Restart your computer and check to see if Windows 11 will update. If it doesn’t continue with the steps shown below.
Clean Windows Update Cache to fix.
If using Windows Update Troubleshooter didn’t solve error 00x800F020B -2146500085 SPAPI_E_No_Such_Devinst The device instance does not exist. You can try cleaning the Windows 11 update cache. To do this, you’ll first need to disable update services so you can delete the data.
Open the Start menu, type Services then open it when it appears.
Now close services and open the Run tool by pressing Windows Key + R.
When the text box appears copy and paste the following into the text box and press Enter.
When you get to the location press Ctrl+A to select everything then press Delete. This will clear all the old and potentially corrupt update data.
Finally, Restart your computer and check to see if the update is working.
Try running the Windows Update Online Troubleshooter.
Another worthy contender to fix error 00x800F020B is to use the Windows Update Online Troubleshooter. This service will help diagnose the issue and resolve it. Personally, I haven’t had much luck with it but it’s a valid option if you’re stuck.
FIX: BAD POOL HEADER error in Windows 10/11
One BSoD error users have encountered is the BAD_POOL_HEADER error in Windows 10.
When the bad pool header appears in Windows 10, it usually won’t boot.
To fix this issue, you should consider checking or updating your driver.
The use of PC repair software can also prove handy in handling this BSoD.
One of the most frustrating errors on any computer must be Blue Screen of Death error.
These errors will constantly restart your PC in order to prevent potential damage, and in some cases, you won’t be able to enter Windows 10 at all.
Since BSoD errors can be such a major problem, today we’re going to show you how to fix BAD_POOL_HEADER BSOD error on Windows 10.How do I fix BAD_POOL_HEADER error in Windows 10? 1. Use Software to fix your BSoD
As you can see from the number of solutions, it’s hard to pinpoint exactly what causes this particular BSoD error, and trying them all is time-consuming.
However, with third-party PC cleaners, most of these solutions are performed all at once, saving you time, headaches, and the possibility of making things worse because of a lack of experience.
We recommend Fortect because it offers multiple PC repair and optimization features, all packed into a simple and easy-to-navigate UI.
Fortect can fix BSoD errors using its Windows system file database. It scans your PC and detects whether you have any corrupt or missing system files and replaces them with new ones.
After you install the soft, let it scan your PC. See the results, select what you want it to fix, and select Start Repair.
⇒ Get Fortect2. Uninstall Dell Sonic Global VPN
VPN software is useful, but certain VPN software, such as Dell Sonic Global VPN, has issues with Windows 10.
It was confirmed by the users that this software can cause BAD_POOL_HEADER BSoD error to appear.
If you have this VPN tool installed, we urge you to remove it in order to fix this error.3. Remove your antivirus software
In some cases, BSoD errors, such as BAD_POOL_HEADER can be caused by your antivirus software. Users reported that Malwarebytes, as well as other security software, can cause this error.
To do that, you can download specific uninstallers designed to completely remove certain antivirus software. If you’re using McAfee, you can use the MCPR tool to remove it.
AVG also has its own tool, and you can download it from here. Many antivirus companies provide you with special uninstallers, and you can download them directly from the company’s website.
Alternatively, you can switch to different antivirus software, and if you’re looking for new security software, we did a list of the best antivirus programs for Windows 10, so make sure to check it out.4. Reinstall your wireless card drivers
BAD_POOL_HEADER is often caused by outdated or incompatible drivers, and users reported that the issue was fixed after uninstalling and reinstalling their wireless network card.
It’s always a good idea to update your network adapter driver, and in order to do that, make sure you visit your network adapter manufacturer’s website and download the latest drivers.
Update drivers automatically
Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.5. Run the BSOD Troubleshooter
If none of the previous solutions managed to resolve the BAD_POOL_HEADER BSOD issue, let’s try with the troubleshooting tools.
Expert tip:6. Run the SFC scan
The SFC scan is a command-line tool that scans your system for potential issues and resolves them on the way (if the solutions are possible, of course).
So, it might be helpful when dealing with the BAD_POOL_HEADER BSOD error, as well.
Here’s how to run the SFC scan in Windows 10:7. Run DISM
7.1. Standard way
7.2. With the Windows installation media
dism /online /cleanup-image /scanhealth
dism /online /cleanup-image /restorehealth
Now, type the following command and press Enter:
DISM /Online /Cleanup-Image /RestoreHealth/source:WIM:X:SourcesInstall.wim:1 /LimitAccess
Make sure to change an X value with the letter of the mounted drive with Windows 10 installation.
After the procedure is finished, restart your computer.
The final troubleshooting tool we’re going to try here is DISM. Deployment Image and Servicing Management freshly deploys the system image, so it’s possible it will wipe away the potential BSOD issues.8. Disable Nvidia Streamer Service
A number of users reported BAD_POOL_HEADER error while using Nvidia graphic card.
According to them, the error was caused by an Nvidia Streamer Service, and in order to fix this error, you’ll have to disable this service.9. Remove overclock settings
In our list of 10 best overclocking software for Windows 10, we briefly mentioned that overclocking can lead to system instability and cause BAD_POOL_HEADER BSoD error to appear.
If your hardware is overclocked and you’re getting this error, be sure to remove any overclocking settings that you have and the error should be resolved.10. Uninstall your audio driver
Few users reported that the issue with BAD_POOL_HEADER was caused by their audio driver, and in order to fix this issue, it was required to uninstall the problematic driver.
Uninstalling a driver is rather simple and you can easily uninstall it from Device Manager. For detailed instructions on how to uninstall your driver, check Solution 411. Check your network adapter driver
According to users, BAD_POOL_HEADER can occur due to a network adapter driver conflict.
Few Netgear users reported that Realtek PCIe GBE Family Controller driver was installed on their system, and that driver caused a conflict with a Netgear driver.
According to users, removing the Realtek PCIe GBE Family Controller driver fixed the BSoD error.12. Disable Fast Startup
If you have a problem with BAD_POOL_HEADER BSoD error, you can fix it by disabling Fast Startup.
After disabling Fast startup, your computer might start a bit slower, but the issues with BAD_POOL_HEADER should be resolved.13. Check for faulty hardware
BSoD errors are commonly caused by faulty hardware, most notably RAM memory, and many users reported that replacing their RAM memory fixed the BAD_POOL_HEADER error.
Other components can also cause this error, and users reported that sometimes the problem can be fixed by replacing your wireless card or your motherboard.14. Reset Windows 10
If BAD_POOL_HEADER error still persists, you can fix it by resetting Windows 10.
Bear in mind that resetting Windows 10 will delete all your installed applications and you’ll have to download and install them again. To reset your PC, do the following:
BAD_POOL_HEADER BSoD error can create all sorts of problems on Windows 10, but you can easily fix this issue by using one of our solutions.
Was this page helpful?
Start a conversation
If you receive the USB Device Over Current Status Detected error notification message when you power on your Windows 11 or Windows 10 computer, then this post is intended to help you. In this post, we will provide the most suitable solutions affected users can try to successfully resolve this issue.What is an overcurrent error?
In a nutshell, if there’s an overcurrent or “E” code, the electrical current on one or more wires connected to your Nest thermostat has spiked multiple times. Nest thermostats have an internal breaker to help prevent damage, and there will appear an overcurrent code if the breaker has been tripped 10 times or more.USB Device Over Current Status Detected
If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the USB Device Over Current Status Detected error on your Windows 11/10 computer.
Diagnose and connect USB devices one at a time
Disconnect front USB ports
Check for missing jumper
Let’s take a look at the description of the process involved concerning each of the listed solutions.1] Diagnose and connect USB devices one at a time
Do the following:
Turn your computer off.
Unplug all the USB devices from your computer.
Wait for at least 1 minute and turn your computer back on again.
Try to plug your USB devices in, one at a time.
You need to restart your computer after plugging in one USB device. This way, you might be able to find the culprit device. If you manage to find the device or or identify the USB port causing this USB Device Over Current Status Detected error, you can simply try to avoid using the device/USB port.
Proceed with the next solution if this action didn’t help.2] Disconnect front USB ports
You may require the services of a PC hardware technician.
Do the following:
Shut down your computer completely.
Unplug the power cable from the socket.
Open your computer’s case.
Once you see the motherboard, search for USB connectors.
Once you have located the pins and socket, unplug the connector.
Now turn on your computer and see if the error message persists.
If the error message doesn’t reappear, it means the USB socket was problematic. In this case, you can get it replaced.3] Check for missing jumper
You may require the services of a PC hardware technician.
Do the following:
Shut down your computer completely.
Unplug the power cable from the socket.
Open your computer’s case.
Check your USB internal port to see if there’s a missing jumper in the USB internal ports. If you see a spot is missing a jumper, put a jumper to short 1 and 2.
Restart your computer.
On boot, check if the issue at hand is resolved. If not, try the next solution.4] Update BIOS
This solution requires you to try updating the BIOS and firmware on your system.
Using tools from OEMs is the easiest way to do so. All OEM manufacturers have utilities that help you easily update, BIOS, firmware, and drivers. Search for yours and download it from the official site only.
This is the safest way to update the BIOS.
ASUS users can download the MyASUS BIOS update utility from the Microsoft Store.
Lenovo users can use the Lenovo System Update Tool.
HP users can use the bundled HP Support Assistant.
Once you complete the manual update of the BIOS/firmware on your system, check if the issue is resolved. If not, proceed with the next solution.5] Replace MOBO
If nothing has worked so far and you have a new motherboard installed on your computer for the first time, it is possible that the motherboard is defective and there are some modules damaged. In this case, if the MOBO is still under warranty, you can have the MOBO replaced.How do I check if my USB ports are malfunctioning? How do you fix a USB port malfunction?
If you’re experiencing a USB port malfunction on your Windows 11/10 device, you can fix USB Port Issues by applying any of these suggestions:
Restart your computer.
Look for debris in the USB port.
Check for loose or broken internal connections.
Try a different USB port.
Swap to a different USB cable.
Plug your device into a different computer.
Try plugging in a different USB device.
Check the Device Manager (Windows).
Hope the post helps you.
Update the detailed information about Try Connecting Your Device Again Bluetooth Error In Windows 11 on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!