Trending March 2024 # Usb Device Over Current Status Detected Error On Windows Computer # Suggested April 2024 # Top 9 Popular

You are reading the article Usb Device Over Current Status Detected Error On Windows Computer updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Usb Device Over Current Status Detected Error On Windows Computer

If you receive the USB Device Over Current Status Detected error notification message when you power on your Windows 11 or Windows 10 computer, then this post is intended to help you. In this post, we will provide the most suitable solutions affected users can try to successfully resolve this issue.

What is an overcurrent error?

In a nutshell, if there’s an overcurrent or “E” code, the electrical current on one or more wires connected to your Nest thermostat has spiked multiple times. Nest thermostats have an internal breaker to help prevent damage, and there will appear an overcurrent code if the breaker has been tripped 10 times or more.

USB Device Over Current Status Detected

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the USB Device Over Current Status Detected error on your Windows 11/10 computer.

Diagnose and connect USB devices one at a time

Disconnect front USB ports

Check for missing jumper

Update BIOS

Replace MOBO

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Diagnose and connect USB devices one at a time

Do the following:

Turn your computer off.

Unplug all the USB devices from your computer.

Wait for at least 1 minute and turn your computer back on again.

Try to plug your USB devices in, one at a time.

You need to restart your computer after plugging in one USB device. This way, you might be able to find the culprit device. If you manage to find the device or or identify the USB port causing this USB Device Over Current Status Detected error, you can simply try to avoid using the device/USB port.

Proceed with the next solution if this action didn’t help.

2] Disconnect front USB ports

You may require the services of a PC hardware technician.

Do the following:

Shut down your computer completely.

Unplug the power cable from the socket.

Open your computer’s case.

Once you see the motherboard, search for USB connectors.

Once you have located the pins and socket, unplug the connector.

Now turn on your computer and see if the error message persists.

If the error message doesn’t reappear, it means the USB socket was problematic. In this case, you can get it replaced.

3] Check for missing jumper

You may require the services of a PC hardware technician.

Do the following:

Shut down your computer completely.

Unplug the power cable from the socket.

Open your computer’s case.

Check your USB internal port to see if there’s a missing jumper in the USB internal ports. If you see a spot is missing a jumper, put a jumper to short 1 and 2.

Restart your computer.

On boot, check if the issue at hand is resolved. If not, try the next solution.

4] Update BIOS

This solution requires you to try updating the BIOS and firmware on your system.

Using tools from OEMs is the easiest way to do so. All OEM manufacturers have utilities that help you easily update, BIOS, firmware, and drivers. Search for yours and download it from the official site only.

This is the safest way to update the BIOS.

ASUS users can download the MyASUS BIOS update utility from the Microsoft Store.

Lenovo users can use the Lenovo System Update Tool.

HP users can use the bundled HP Support Assistant.

Once you complete the manual update of the BIOS/firmware on your system, check if the issue is resolved. If not, proceed with the next solution.

5] Replace MOBO

If nothing has worked so far and you have a new motherboard installed on your computer for the first time, it is possible that the motherboard is defective and there are some modules damaged. In this case, if the MOBO is still under warranty, you can have the MOBO replaced.

How do I check if my USB ports are malfunctioning? How do you fix a USB port malfunction?

If you’re experiencing a USB port malfunction on your Windows 11/10 device, you can fix USB Port Issues by applying any of these suggestions:

Restart your computer.

Look for debris in the USB port.

Check for loose or broken internal connections.

Try a different USB port.

Swap to a different USB cable.

Plug your device into a different computer.

Try plugging in a different USB device.

Check the Device Manager (Windows).

Hope the post helps you.

You're reading Usb Device Over Current Status Detected Error On Windows Computer

Fixbsod Error On Windows Computer

The chúng tôi file is a Windows system driver file that is associated with the Graphics Rendering capabilities of a computer. This file is known to cause a Blue Screen error or BSOD. But the main reasons include conflicts like RAM or Hard Disk Issues, incompatible firmware, or corrupt drivers. Fixing this issue is straightforward. However, there are various potential workarounds for the same. This applies to Windows 11 and Windows 10.

There can be the following BSOD Errors that are related to this file:

Fix chúng tôi Blue Screen error

If this error just started to occur and you have a System Restore Point created already, you can use it to revert it to your earlier settings and configuration. If not, you can just create one right after using other fixes and use it in the future if you face any similar error.

We will be undertaking the following fixes to get rid of this error,

Reinstall Graphics Card Drivers.

Run DirectX Diagnostic Tool.

Update or re-install DirectX.

Reset BIOS Configuration.

Check Registry settings.

Disable Sleep Functionality.

1] Issues related to Graphics Card Drivers

Now, the best practice for you should be to go to the website of your manufacturers like NVIDIA, AMD or Intel. Go to the section called Drivers. And download the latest definitions from there. After the download has been completed, just install the graphics driver and reboot your computer. Find the latest Graphics Drivers for NVIDIA from here, AMD from here and Intel from here.

There is another way. You may use Display Driver Uninstaller to remove AMD, INTEL, NVIDIA Drivers, and then use NVIDIA Smart Scan, AMD Driver Autodetect or Intel Driver Update Utility to download and install or update the respective drivers.

2] Run DirectX Diagnostic Tool

As mentioned above, this error is related to DirectX Graphics APIs. So, in order to fix the issue, you can try to run the DirectX Diagnostic Tool.

3] Update or re-install DirectX

Another basic fix for the issue is to update or reinstall DirectX . By updating or reinstalling DirectX, you can just replace the corrupt or incompatible components of DirectX from your computer.

4] Reset the BIOS Configuration

You can also try to Reset the BIOS Configuration and check if that fixes your issues.

5] Using the Registry Editor

Type regedit in the Search box and hit Enter. Once Registry Editor opens, navigate to the following key-


Set the name of this newly created DWORD as TdrDelay.

Exit the Registry Editor and then reboot your computer for the changes to take effect.

6] Disabling the Sleep Functionality

Sometimes the Sleep functionality of the display might also cause this BSOD. Sometimes while the graphics card’s drivers are being used in the background, the display goes to sleep, and then when it is awakened, it may cause this BSOD. To stop this, you can prevent your computer from getting into Sleep mode.

PS: This SYSTEM THREAD EXCEPTION NOT HANDLED Blue Screen can also occur for other drivers like chúng tôi or atikmpag.sys, iaisp64 sys, chúng tôi chúng tôi chúng tôi etc.

How do I fix frequent BSOD in Windows?

On broader levels, it could be because of driver issues or Windows Update, or hardware failure.  You will start with a small investigation if you recently update the driver or was a Windows Update rolled out. If yes, then uninstall it, and check if this helps.

If these don’t work, then you may need to check with the hardware, but before that make sure to run the hardware troubleshooter.

Is Blue Screen of Death fixable?

While it is not guaranteed, many BSOD codes can be fixed. Check out our detailed guide on how to fix various BSOD screens by following this quick guide. Driver issues, Windows Update, hardware failure, conflicting software are some of the common reasons for BSOD.

Is there a way to disable the Windows Error Recovery Screen?

If you are seeing the Recovery Screen every time you reboot then there is a problem that you need to fix. However, if you still want to disable the screen, then do the following after you login to your account:

Press Win key + S to open Search

Type the following command bcdedit /set bootstatuspolicy ignoreallfailures.

Reboot and check if the issue still exists.

Let us know if anything here helped you.

Fix Error Code 0X0000Ffff On Windows Computer

Some users are seeing Error Code 0x0000FFFF on their Windows computers. Some are experiencing a BSOD, whereas, some are just seeing an error message. There is a wide variety of errors that one can see and hence, the reason will differ as well.

The BSOD comes with the following error message-

Your PC ran into a problem and needs to restart. We’re just collecting some error info, and then we’ll restart for you.

Whereas, some are seeing the following error message when trying to open Microsoft Sharepoint-

Error 0x0000FFFF Sharepoint Reported Error 0x0000Ffff

Error 0x0000FFFF: Microsoft Sharepoint has encountered a problem and needs to close.

We are sorry for the incovenience.

In this article, we are going to see how to resolve the error code with ease.

What causes Error Code 0x0000FFFF?

There are many things that can cause the error code in question. Sometimes, it can be because of faulty hardware, such as Hard Drive or RAM. It can also be due to outdated drivers. This is a very common issue, usually, when you update your Windows, your drivers get updated. But when you don’t update Windows, or if Windows Update doesn’t include the latest installation package for the driver, you will see the error code.

There are some other reasons as well that we will be seeing later in this article.

Fix Error Code 0x0000FFFF on Windows computer

If you want to fix Error Code 0x0000FFFF on Windows, then follow the given solutions.

Update your drivers

Troubleshoot in Clean Boot

Perform a Cold Restart

Check your RAM

Scan for Virus and Malware


Analyze your Mini-dump file(s)

Let us talk about them in detail.

1] Update your drivers

As mentioned earlier, you need to make sure that your drivers are up-to-date. To do that, first, try updating your Windows. Most of the time, when you update your OS, the drivers automatically get updated. If that didn’t work, then try downloading the drivers from the manufacturer’s website or use a Driver Update software.

Once you update the driver, check if the issue persists.

2] Troubleshoot in Clean Boot

The issue can occur because of a third-party application interfering with your program. That’s why try troubleshooting the issue in Clean Boot. This way, you will get to know which application is causing, then you can remove it to resolve the issue.

3] Perform a Cold Restart

You can see the error code in question because of the faulty connection of hardware to the motherboard such as your RAM or Hard Disk. Performing a Cold Restart will resolve the issue. Follow the given steps to do the same.

Turn off your computer and any other connected device.

Remove all the plugs and disconnect all the wires.

Wait for a minute or two and then restart your computer.

Once you do that, check if you are still seeing the error code in question.

4] Check your RAM

If you have a desktop with multiple RAMs, then checking whether a RAM is faulty or not is easy. Just plug one out, restart the system and see if the issue persists. If you are not seeing the error message, then one of the RAMs is faulty. In case, you are still seeing the issue, plug that RAM back in, remove the other RAM, restart the computer, and check.

But if you have a Laptop or a Desktop with just one RAM, then a visit to an expert is a must. Then have tools and techniques to resolve the issue.

5] Scan for Virus and Malware

Next up, try scanning your computer for viruses and malware. You can use any third-party antivirus or Windows Defender to do the same. To use Windows Defender, follow the given steps.

Hit Win + S, type “Windows Security” and open the app.

Let it run and hopefully, your issue will be resolved.

6] Run SFC

If your system files are corrupted, you will see the BSOD. To resolve it, we need to run the System File Checker or SFC. It is a command that can resolve BSODs. So, open Command Prompt as an administrator and execute the following command.

sfc /scannow

Then, restart the computer and see if the issue is resolved.

7] Analyze your Mini-dump file(s)

If you are getting BSOD then check your Mini-dump file(s). This is the file that contains information about the BSOD and crashing issue.

Open File Explorer and go to the following location.


Then store all the contents of that folder in a ZIP file and send it to a Microsoft Forum and ask them to resolve the issue. In one of the cases, the issue was due to BitDefender security. So, your reason can be the same or different.

What is the error code 0x00000000?

The error 0x00000000, The operation completed successfully occurs while copying the files. When this error occurs, the copy operation is terminated. There are many reasons why this error occurs while copying the files, like corrupted system files, a conflicting background application or service, permission issues, malware infection, etc.

Hopefully, you are able to resolve the issue with the mentioned solution.

How To Fix A No Bootable Device Error On Windows 10

If you’ve started up your Windows PC and you’re faced with a “no bootable device” error, you might panic. While it could be a sign that your hard drive has failed, it could also point to a misconfigured boot order or corrupt system files, which can be fixed using certain Windows system commands like the System File Checker (SFC).

A “no bootable device” error can be problematic, but it can also be fixed by following some common troubleshooting steps. If you’re facing this error and you’re not sure how to fix it, the steps below should help you resolve the issue on Windows 10.

Table of Contents

Check Your Drive Boot Order

In many cases, a “no bootable device” error is a sign that your PC can’t find the correct drive to boot up because the boot order, which determines which drives and devices it should load and in what order, is incorrectly configured. To fix this, you’ll need to enter your PC’s BIOS or UEFI settings menu.

Start by switching on your PC. As it begins to boot, you’ll need to press a certain key to interrupt the process and access your BIOS/UEFI settings menu. Check your PC or laptop’s manual for the correct key to press, or attempt common keys such as F1, F10, F12, and DEL.

The BIOS or UEFI settings menu will differ from device to device. Locate the device boot options in your menu and change the order using the on-screen instructions, making sure that your Windows system drive is in the first position.

With the boot order changed, follow the on-screen instructions to save your settings and reboot your PC. When your PC reboots, and assuming no other issues, your system drive will load first, allowing the Windows boot-up process to begin.

Check Your Cabling

If there are other issues causing a “no bootable device” error, however, you’ll need to investigate further. If you have a desktop PC, for instance, you may need to open the case and check the cabling to ensure that your hard drive’s power and data cables are connected properly.

Before you close your case, however, you should also check for damage. A frayed or exposed cable may also stop your drive from working. Always replace damaged cabling when you spot it to prevent your drive from being damaged.

Scan for Corrupt System Files Using SFC

If your hard drive is connected properly, it could point to a corrupt Windows installation. You can check for corrupt system files using the System File Checker (SFC) tool.

As Windows can’t boot, however, you’ll need to create a Windows 10 installation USB stick (or DVD) first. This will give you access to a command prompt in the Windows installation menu, allowing you to run the SFC command to scan for corrupt files on your drive.

However, this will only work if your drive is detected by your PC in your BIOS/UEFI menu and by the Windows installation media. Otherwise, this step won’t work, and you’ll need to try another method.

To start, insert your Windows installation media and start up your PC. You may need to change the boot order (using the steps above) to ensure your USB or DVD media is selected first. Once the Windows installation screen appears, select the Shift + F10 keys to open a command prompt window. 

In the command prompt window, type diskpart, then list volume. This will give you a list of available drives, as well as their drive letters. Make note of the drive letters assigned to the drive containing your existing Windows installation and to the smaller System Reserved partition.

SFC will check and attempt to repair any errors in your existing Windows installation. Once the process is complete, press the Close button in the top-right corner to close both the command prompt and Windows installation windows and restart your PC.

Repair Windows Bootloader (GPT or MBR) Using Diskpart

Older Windows installations used a Master Boot Record (MBR) to save hard drive partition information to your drive, giving your PC information on where to find and load Windows system files. If you’ve switched from MBR to GPT recently, you may have corrupted your bootloader. 

As a PC’s BIOS/UEFI requires this information to boot Windows, you’ll need to repair or replace it first using the diskpart command. This carries extreme risk, however, and could cause you to lose all saved data on a drive. If you’re unsure what you’re doing, you’ll need to use another method to back up your drive first.

If you want to proceed, you’ll need Windows installation media on a USB drive or DVD first to be able to run this command on a drive that no longer boots.

To begin, insert your installation media and start your PC and change your boot order (using the steps above) to load the Windows installer. Once the installation menu appears, select the Shift + F10 keys to open a new command prompt window.

In the new command prompt window, type diskpart, then list disk. Identify whether or not you have an GPT or MBR bootloader by checking whether or not your system drive has an asterisk under the GPT column. If it does (or if the column is missing entirely), type sel disk 0 (replacing 0 with the correct volume disk number listed by the list disk command), then list volume. Make a note of the assigned drive letters at this point.

If you have an MBR bootloader, type exit to close diskpart, then run the following commands sequentially to repair your bootloader and restart your PC: bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd, shutdown /r. If the process is successful, your system drive should boot up correctly. If you see an access is denied warning, you’re probably trying to repair a MBR bootloader on a GPT drive.

If you have a GPT bootloader, select the 100MB System Reserved or (System EFI) partition by typing sel vol 0, replacing 0 with the correct volume number listed by the list volume command. Assign a new drive letter to that drive by typing assign letter Z: (replacing Z: with another available drive letter).

Once assigned, type exit to close diskpart, then run the following commands sequentially to repair the existing GPT bootloader, replacing drive letters with the letter you assigned previously: cd /d Z:efimicrosoftboot, attrib BCD -s -h -r, ren BCD chúng tôi bcdboot C:Windows /l en-us /s k: /f ALL. If the commands are successful, type shutdown /r to restart your PC.

If these steps don’t work, or if you’ve corrupted your bootloader entirely, you may need to wipe and reinstall Windows. This will place a new bootloader on your system drive, but you’ll probably lose any saved files in the process.

Maintaining a Windows 10 Installation

A “no bootable device” error on a Windows 10 PC can be a sign that urgent maintenance is required. Keeping your PC well maintained with regular system updates and a scheduled file backup can help you, especially if your hardware has failed and you need to reset Windows to factory settings.

Apple’S Fight With Europe Over Usb

C. Scott Brown / Android Authority

Officials within the European Union are hoping to mandate charging standards, and Apple, predictably, isn’t happy about it. Under a floated European Commission proposal, USB-C would become the only standard for wired smartphone charging, since proprietary formats like Apple’s Lightning prevent people from reusing cables and many other accessories. In fact, the initiative would cover more than just phones — headphones, portable speakers, and tablets are just some of the other targeted devices.

In protest, Apple claims that the proposal would stifle innovation, but that was shot down by Anna Cavazzini, the chair of the European Parliament’s consumer protection committee, who pointed out that if something better than USB-C emerged, the rules would adapt. It’s not like Apple is facing an imminent threat either, since standardization would come into force in 2024 at the earliest.

There really doesn’t seem much hope of Apple swaying EU officials, and it’s for the better of the tech industry. The company is fighting a losing battle — particularly because there are few good reasons to cling to Lightning.

Lightning vs USB-C: The tide is turning

Robert Triggs / Android Authority

To begin with, Apple itself is slowly abandoning the format. The iPhone 13 lineup now represents the company’s only flagship products equipped with a Lightning port. Every iPad except for the 10.2-inch “budget” model has switched to USB-C, helping to bolster their laptop replacement credentials. You can still find Lightning on audio-related products like AirPods, the iPod touch, and the Powerbeats Pro, but gear like the Beats Flex and Beats Studio Buds have made the switch. That’s probably because the Beats brand caters to both iOS and Android users, and the latter has come to expect USB-C.

On a technical level, the reasons to cross over are obvious. Device and connector improvements have barely kept Lightning relevant. Via a Lightning-to-USB-C cable, you can charge an iPhone 13 at up to 25W — more than the Pixel 5’s 18W, for example — but Apple hasn’t said if Lightning is capable of more. Android phones regularly support at least twice that wattage over USB-C. The Xiaomi Mi Mix 4’s charger is rated at a crazy 120W, meaning owners can do a full recharge in as little as 21 minutes, and that’s without Boost Mode on. The USB Promoter Group has already greenlit charging up to 240W for future USB-C devices and cables.

The iPhone’s Lightning port is slower to charge and transfer data than USB-C equivalents.

When it comes to data, even the fastest Lightning ports are limited to USB 3.0 speeds, and some may still be at 2.0. We’d know for sure if Apple was more forthcoming with tech specs. At the 3.0 level that’s still a cap of 5Gbps or less, versus the 10Gbps on many dedicated USB-C connections. Some USB 3.2 devices are now reaching 20Gbps, and if you’re lucky enough to have USB 4, the ceiling is 40Gbps.

Do you support the idea of USB-C as a universal (wired) charging standard?

30282 votes

Nothing illustrates the absurdity of Apple’s position more than the iPhone 13 Pro. 256GB storage models will soon be able to shoot video in the Apple ProRes codec, popular for TV- and cinema-quality work. Yet iMore notes that in 4K HDR, a single minute of ProRes consumes 6GB — for 30 minutes of footage, you’re talking upwards of 50 minutes to transfer it to a Mac or PC at USB 2.0 speeds, or around five minutes via USB 3.0. A 10Gbps USB-C transfer would shrink the ordeal to a little over two minutes.

Returning to the European situation, the EU is right to suggest that proprietary standards are terrible for e-waste. Although Lightning interacts with most USB ports and adapters just fine, that still translates into many cables, docks, and other accessories that become useless when someone switches to Android. Someone switching to an iPhone, conversely, may still have use for their USB-C purchases, even if it’s with other hardware. The EU proposal would allegedly reduce e-waste “by almost a thousand tonnes” annually — whether or not that figure is exaggerated, there’s no denying that waste would be reduced.

Apple’s hardline stance on Lightning contradicts otherwise laudable environmental policies, such as the goal of using as many recycled materials as possible and reducing the amount of packaging it ships in the first place. It made a big deal out of removing charging adapters from its boxes, claiming those same green benefits. Avoiding USB-C is at least a little hypocritical.

So why would Apple hold on to Lightning?

Robert Triggs / Android Authority

If we consider stated arguments against the EU alongside the company’s history, the main reason is obvious: control. Moreso than most tech firms, Apple likes to adopt whatever technology it wants, when it wants, often ignoring public opinion. The company insists on AAC files for the iTunes Store, while those who want lossless audio are nudged towards an Apple Music subscription or must simply go without. There’s still no easy way of loading custom fonts or icons in iOS, and iPhones only received homescreen widgets in 2023, a full 12 years after Android — not forgetting the strict and sometimes controversial rules in place on the AppStore.

Try Connecting Your Device Again Bluetooth Error In Windows 11

Some users have been complaining that when trying to connect a Bluetooth device to their Windows 11 PC, they receive an error, Try connecting your device again. While this error may appear for any user at any random time, the Bluetooth issue mainly occurs in PCs with freshly installed Windows 11.

What causes the Bluetooth error in Windows 11?

One of the primary reasons you may encounter the error message, “Try connecting your device again” is if you have not enabled Bluetooth. So, before you proceed with the root cause analysis, you may want to check if Bluetooth is enabled in Windows 11.

Among the other causes that may lead to this Bluetooth error are:

If the Bluetooth support service is not running.

Due to corrupt Bluetooth drivers or outdated Intel Chipset drivers.

Outdated BIOS version.

Interference by other connected Bluetooth devices.

A glitch with the Bluetooth functioning of your system.

Fix ‘Try connecting your device again’ Bluetooth Error in Windows 11

Before you proceed to follow the solutions, we recommend you restart your PC, turn Bluetooth Discovery Off/On for your PC/device, and see if that helps. If that does not, then follow these suggestions:

Connect the Wi-Fi antenna

Remove and reconnect your device

Enable Bluetooth Support Service

Run Windows Bluetooth troubleshooter

Update the Intel chipset driver

Reinstall the Bluetooth driver

Update BIOS

1] Connect the Wi-Fi antenna

This method is a user-tested solution and seems to have worked with most of the users facing the “Try connecting your device again” error.

Intel says that some Bluetooth chipsets use Wi-Fi antennas to function, so this method is applicable to only specific motherboards.

So, if it’s a new Windows 11 PC, check for the dedicated Wi-Fi antenna/s (could be a pair) in the box that came along.

Based on Intel’s description, the wireless adapters that need an antenna are Intel Wireless-AC 9260, Intel Dual Band Wireless-AC 8265, and Intel Dual Band Wireless-AC 8265 Desktop K.

Read: Bluetooth devices not showing, pairing or connecting in Windows

2] Remove and reconnect your device

In such a case, you must unpair the device and pair again to reset the device and also clear the Bluetooth cache in Windows 11:

Press the Win + I keys together to launch Windows Settings.

Now, restart your PC, open the Settings window again as shown in Step 1, and pair the device again.

Read: Bluetooth is not working in Windows 11

3] Turn on the Bluetooth service

In this case, you can turn on the Bluetooth support service as explained below:

Press the Win + R keys simultaneously to launch the Run dialog.

Type in chúng tôi in the search bar and hit Enter.

In the Properties dialog, under the General tab, go to Startup type and select Automatic.

Read: Fix Bluetooth connection problems in Windows 11

4] Run Windows Bluetooth troubleshooter

Run Windows Bluetooth troubleshooter and see if it helps you. You can access it via the Settings Troubleshooters Page or the Get Help app.

5] Reinstall the Bluetooth drivers

In some cases, you may encounter this error in Windows 11 due to a corrupted Bluetooth driver. Hence, it’s recommended to update the Bluetooth drivers to their latest version or download it from the manufacturer’s website to fix the issue.

Visit the manufacturer’s website to download Bluetooth drivers for your device. Having done that, you have to uninstall your existing Bluetooth driver as follows:

To open the Run dialog, press the Win + R shortcut keys.

Now, type chúng tôi in the search box and hit Enter to open the Device Manager.

Now run the downloaded driver setup file to install the driver.

Read: Bluetooth device Paired but Not Connected

6] Update the BIOS firmware

Also, in some cases, the Bluetooth error shows up due to outdated BIOS firmware. BIOS firmware comes pre-installed with the motherboard in the form of a chip.

Since it’s the first software to run as the PC boots up, it’s responsible for some basic hardware initialization.

This software (BIOS) controls the data flow between the PC and external devices like a hard disk, keyboard, mouse, etc., that includes Bluetooth devices.

However, for the proper functioning of Bluetooth devices, the BIOS firmware should be up-to-date with the latest drivers.

Therefore, make sure to update the BIOS firmware on your Windows 11 PC and get rid of the Bluetooth error. All OEM manufacturers have utilities that help you easily update BIOS, firmware, and drivers. Search for yours and download it from the official site only. This is the safest way to update the BIOS.

I hope something here helps you.

Read: Bluetooth is missing or not showing in Device Manager.

How do I allow Bluetooth devices to connect to Windows 11?

To allow other Bluetooth devices to connect to your Windows 11 PC, make sure your PC supports Bluetooth and that it’s turned on:

Press the Win + I shortcut keys to open the Settings app.

Next, go to Bluetooth on the right and move the toggle to the right to turn it on.

Now, go to the taskbar, expand the system tray and here, you should see the Bluetooth icon.

Alternatively, you may also check if the Airplane mode is turned on or off, or if the antivirus is blocking the device.

How to fix Bluetooth missing from Device Manager in Windows 11?

If Bluetooth is missing or not showing in Device Manager, first of all, we suggest you restart your computer and then if the problem disappears. If not, Run Bluetooth and Hardware & Devices Troubleshooter, Restart Bluetooth Support Service, Enable hidden devices in the Device Manager, Download the Bluetooth driver from the manufacturer’s website, Turn off Fast Startup, etc.

Update the detailed information about Usb Device Over Current Status Detected Error On Windows Computer on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!