You are reading the article Windows 11/10 Stuck On Please Wait Screen updated in December 2023 on the website Cattuongwedding.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Windows 11/10 Stuck On Please Wait Screen
If you start your Windows computer and it gets stuck on the “Please wait,” screen then here is how you can resolve the issue. After the computer starts, many system services start even before you log in to the computer. Services related to Network, User Interface, and more have to be ready by the time you reach your desktop.
How do you get past Windows stuck on Please wait screen?If you find that your computer screen is stuck on the Please wait screen, then here are some steps that will help you. On this screen, you will not be able to use ALT+CTRL+DEL, and so the only option you have is to remove peripheral devices, reboot the computer and follow these suggestions.
Force Automatic Startup Repair
Disable some Windows Services
Rollback Changes or perform System Restore.
1] Force Automatic Startup RepairIt would have been wise to use a Windows Bootable USB drive to boot into the safe mode, but assuming you don’t have access to any other computer, let’s force this.
First, disconnect external drives, peripherals, etc, wait for a minute and power on your system.
Now, force shutdown- and then power on – your computer three times in a row. You can do this by first turning on the computer and then immediately pressing the power button again, but this time, keep it pressed. It will turn off the computer. If you are using a desktop, you can also switch off from the power supply. Repeat this three times.
The next time you start the computer, it will begin the Automatic Startup Repair process, which will eventually launch the Advanced Recovery mode.
Go to Troubleshoot and then select Safe Mode.
2] Disable ServicesOnce the computer boots into Safe mode, you need to disable three services—
Windows Error Reporting Service,
Network List Service
Network Location Awareness.
To do this, open the Run prompt and type chúng tôi and then press the Enter key.
It will open the Windows Services Manager.
Locate the services we mentioned, and follow the steps for each of the services.
Stop it if the service is running
Change its Startup type to Disabled
Restart the computer.
3] Rollback Changes or perform System RestoreWhen you are back to the regular boot, the, Please wait screen should not hold for long, and you should get the log-in screen or the desktop if there is no password set.
While I wanted to suggest this earlier, now that you are here, you need to find the reason. If there was a change you made to the computer before the issue occurred, you might need to reverse it. If you can figure it out, it will be easy to fix the cause. If not, the best option is to restore your computer to its previous working state.
TIP: There are more suggestions here that will help you if your Windows is stuck on loading some screen.
Why does my Laptop keep saying please wait?If your laptop keeps saying Please wait – then the stuck screen can come due to corrupt Windows files. Windows files may get damaged due to viruses or any unwanted programs.
I hope this post was easy to understand and that you could pass the Windows 11/10 stuck on Please wait screen.
You're reading Windows 11/10 Stuck On Please Wait Screen
Windows Stuck On Signing Out Screen With Blue Spinning Circle
When you log out of Windows 11/10, it brings you back to the login screen where you switch the user or log back in. However, at times, Windows 10 remains stuck on the signing out screen with a blue spinning circle. All you see is the process of signing out, but it stays there. In this post, we will share some tips to get yourself out of the stuck signing out screen.
Windows 11/10 stuck on signing out screenIf Windows 11/10 is stuck on the signing out screen with a blue spinning circle, then these suggestions are sure to help you get out of the situation:
Force shutdown the computer
Troubleshoot in Clean Boot State
Check the status of User Profile Service
Repair User Profile
Run System Restore.
Make sure to use an administrator account which is required for carrying out some of our suggestions.
1] Force shutdown the ComputerSometimes it’s a one-off problem and gets resolved by forcing a shutdown. Long press on the power button of the laptop or computer until the screen goes blank. Restart the computer, and log in and log out to check if the problem persists.
2] Boot into Clean Boot StateWhen you log out of the computer, Windows closes all applications and services related to the account. If anything doesn’t complete or stop responding, it gets stuck. Something similar may be happening here.
Force shutdown the computer, restart, and login back in to the computer. Next, boot in Clean Boot State. Clean-boot troubleshooting is designed to isolate a performance problem. To perform clean-boot troubleshooting, you must take several actions, and then restart the computer after each action. You may need to manually disable one item after another to try and pinpoint the one that is causing the problem. Once you have identified the offender, you can consider removing or disabling it.
Here are a few things you can do:
Carefully examine the list of programs. One of the applications may be blocking the process.
Exit all the program/s on the computer before logging out.
3] Check the status of User Profile ServiceThe User Profile Service is responsible for loading and unloading user profiles. If this service is stopped or disabled, users will no longer be able to sign in or sign out successfully. If disabled, some apps might not be able to get user data. Also, it will block any notifications related to the user account.
Open Services Manager
Search for User Profile Service
Ensure that the startup type is set to Automatic.
Make sure that it is Started.
This is likely to help resolve your issue.
4] Repair User ProfileBefore you carry out this step, do create a system restore point first.
Now, part of the user profile may be corrupt, and this could lead to signing out issues.
You need to repair the corrupt user profile using a software or fix it using the Registry Editor.
Open Registry Editor and navigate to:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileListLook for Folders Starting with S-1. If you notice any of the folders which end with .bak, then that’s what is causing the issue.
Assuming Folder names as S-1-x and S-1-x.bak
First Rename S-1-x to S-1-x.backup, and then rename chúng tôi to S-1-x.
If the username is not the same as the corrupted user name, then change it to the expected name.
Exit and restart.
Read: Spinning dots or Circle animation not showing on Reboot or Shutdown Screen
5] Rollback to a good Restore pointIf you have created a restore point earlier, then look for a restore point that is at least a week old, and restart Windows. Verify if the issue was resolved.
We hope these tips were easy to follow and helped you to resolve the issue.
11 Ways On How To Fix Windows 11 Black Screen Issue
Seeing a black or blank screen instead of your regular desktop or login screen might be daunting. However, there’s no reason to worry.
This problem mainly occurs due to Windows Explorer or driver bugs. Such issues are rather easy to solve and only need a few minutes.
In the worst-case scenario, you will need to reset your OS, which is actually not that bad.
Monitor connection issues.
Windows Explorer is not running.
Improper registry configuration.
Graphics Driver defects.
Bugs in Windows updates.
You can apply certain methods based on where you encounter the black screen. But some of them work for all cases. So go through the possible solutions below and carry them out to resolve the Black Screen error.
If your screen stays black even after powering up the PC, it’s likely because of faulty hardware connections. We recommend checking the following connections and making sure they are stable:
Monitor Cable: Make sure to check the connection between the monitor and the CPU. It’s better to reinsert it into the CPU socket properly.
GPU Cards: They are the main devices that render the display for your PC. Incorrectly inserting them will prevent your display.
RAM: Faulty RAM causes many system issues. So take them out and insert them into the RAM slots again. Make sure to clean them before reinserting them.
If you have trouble checking such connections, it’s better to get help from a hardware specialist.
Often, outdated or buggy graphics drivers are responsible for this issue. If you get a black screen after login, first, try restarting the graphics driver. You can do so by pressing the Win + Ctrl + Shift + B hotkey.
If it doesn’t work, you need to update the driver.
You can also install the latest drivers from their official website. If you already have the latest versions, try reinstalling the drivers.
If you can’t log in to your account, you need to boot in safe mode and update or uninstall the driver. To boot in safe mode:
Then, follow the steps above to update or reinstall the display drivers.
If you get this issue after logging in, it’s likely that the Windows Explorer is not running or has other problems. It is also the most probable cause if you get the black screen at random while using your PC. Start or restart the process to resolve the issue. To do so,
If you can’t run explorer.exe, it may have become corrupt or is missing. You need to repair the integrity of your system files to resolve this issue. We recommend running the SFC, DISM, and CHKDSK tools. Check out our article on How to Repair Corrupted Windows Files to find the necessary steps.
Restart your PC from the Ctrl + Alt + Del screen and check if the error resolves.
We highly recommend to make a backup of the registry before making changes to it.
This is another possible solution for the black screen if the cursor is visible. Sometimes the App Readiness service runs and gets stuck after logging in to your account. In such a scenario, if you look through the Event Viewer (Run new task as eventvwr), you’ll likely see an error such as:
“A timeout (30000 milliseconds)… transaction response from the AppReadiness service.”
You need to disable this service to fix the issue. To do so:
Restart your PC and check if the issue resolves.
Another case of the black screen occurs before getting the login screen. In such cases, the first thing you should do is to power cycle your PC. Here’s how you can do so:
Shut down the computer and remove all peripherals.
Remove the power cord and the laptop battery.
Press the Power button for 20 seconds.
Reinsert the battery or the power cord and power up your PC.
Defective RAM sticks or slots are responsible for many system issues. It’s better to run the Memory Diagnostic to check for such defects. To do so,
The troubleshooter will run after a reboot and check for any defects. Then, after another restart, it will show the results. Take your PC to a hardware expert to repair or replace the faulty RAM sticks or Slots.
We have a detailed article on How to Open and Run Windows Memory Diagnostic. Check it out for more information on the process.
If you experienced this error after a system update or upgrade, it might be an issue with the update. Report it to Microsoft and wait for further updates or patches. Make sure to install them as soon as they are available.
In the meantime, you can roll back to the previous version. To do so,
You can also roll back to Windows 10 from 11 within 10 days of the upgrade. To do so,
Open the elevated Command Prompt.
Enter DISM /Online /Initiate-OSUninstall.
Restart your PC and check if the error resolves.
In rare cases, this issue results from malware or third-party interference. Boot up your PC in safe mode and check if the error resolves. If so, third-party apps are likely responsible. First, scan your computer and uninstall any applications you installed recently. Then, restart and boot in normal mode.
You can scan your system even if you can’t boot in safe mode. To do so,
Another possible solution for the black screen before login is to run the Startup Repair. It will check and resolve minor issues you may encounter during booting. To run this troubleshooter,
If Startup Repair couldn’t find or fix any errors, you can try it again after rebuilding the BCD.
If you don’t have an appropriate restore point, you need to factory reset your system as the last resort.
You can also clean install Windows 10 on your PC if you got the error after upgrading to 11.
In general, you need to perform the following solutions:
Check your RAM, GPU or Peripherals.
Analyze the crash minidump file.
Reset GPU or BIOS settings.
Update all your drivers.
How To Fix Windows 10 Stuck On Just A Moment Loop
Is your PC stuck on Just a moment loop? Your Windows may have failed to install one or more updates properly and caused a system failure. Or a software you installed may have corrupted the system files. Or something may have corrupted your boot partition.
The simplest solution that you can do is to perform a restart of your PC. Windows should try to reload the required updates again. Hopefully, this should prevent the loop screen from appearing. But if it doesn’t work, you may have a real problem here.
Below, I have compiled a few approaches to help resolve the issue. I have arranged the methods in the order of severity of the issue. Make sure you start working from the first approach. Continue working your way down until the endless Windows 10 blue screen goes away.
Before diving into the actual steps, it is important to learn how to boot your Windows 10 into safe mode. Safe mode is a feature of Windows that boots Windows with the least number of required files. This means disabling any additional drivers, startup software, anti-virus programs, etc.
Safe Mode also restricts the use of certain applications so you cannot use it the same way as normal mode. It is merely for troubleshooting purposes. Once you are done using Safe Mode, you can just restart the computer and it will boot back to normal mode.
Use the following steps to log into Windows with safe mode enabled.
Start Windows in Safe Mode.
Press Win key + R to open the Run window.
Type sysdm.cpl and press OK to bring up a new window.
Go to the Advanced tab.
Under Start-up and Recovery, select Settings.
Uncheck the Automatically restart option.
Check the Write an event to the system log option.
Press OK.
Select Apply and OK to close the window.
Restart PC into normal mode.
Power off Windows by pressing the power button for 10 seconds.
Power it back on.
When the logo appears, hold the power button for another 10 seconds to power it off.
Repeat Steps 1-3 several times. You should see the Preparing Automatic Repair message on the Windows logo screen.
Under the Automatic Repair screen, select Advanced options.
Select Startup Settings.
Select Restart.
When Windows restarts, try with one of the following options disabled.
Driver signature enforcement by pressing 7 or F7
Early-launch anti-malware protection by pressing 8 or F8
Automatic restart on system failure by pressing 9 or F9
Continue on the boot process to see if you can get past the Please wait screen.
If unsuccessful, repeat the steps and try disabling the next option.
Repeat until you identify what caused the issue.
Power off Windows by pressing the power button for 10 seconds.
Power it back on.
When the logo appears, hold the power button for another 10 seconds to power it off.
Repeat Steps 1-3 several times. You should see the Preparing Automatic Repair message on the Windows logo screen.
Under the Automatic Repair screen, select Advanced options.
Select System Restore.
Select a restore point that you would like to restore to. All files and data that were created or modified past this restore point will be deleted. This will include apps as well as data.
Spotlight Doesn’t Work On Windows 10/11
Spotlight doesn’t work on Windows 10/11 [EFFECTIVE FIXES]
388
Share
X
One thing is for certain when it comes to Windows 10’s UI: even though it’s not always intuitive, it looks great aesthetically. One of the features that’s not essential but impacts the overall impression must be Microsoft Spotlight.
For you that don’t know, Microsoft Spotlight basically automatically switches wallpapers for your Lock Screen. It uses Bing gallery photos from the whole world and changes them every time you log out.
It’s a great way to brighten up your initial screen while you stare in awe in the beautiful and unique parts of the globe.
However, it seems that Windows updates ruined the experience for some users. Luckily, we’re there for you. We’we prepared the list of the possible solutions that should help you resolve Spotlight issues.
How can I fix Spotlight on Windows 10? The easiest way to fix it is by restarting the service manually. In most cases, the problem is triggered by the lack of internet connection or some process bugs. If that doesn’t do the job, clean the Spotlight’s download folder and then reassign its service.
Continue reading for the detailed explanation.
Steps to repair Windows Spotlight: Solution 1 – Check your connectionThe first step you should take is to check the connection. The Spotlight feature is dependable on the internet connection and without it, you won’t be able to get yourself that special nature scenery.
When you start your PC, you should see the connection signal or LAN notification on your Lock Screen. If it’s not there, make sure to troubleshoot your connection before we proceed to the next steps.
On the other hand, if your connection is functioning as intended and the Spotlight is still stuck/unresponsive, you’ll need to put more effort in the trouble at hand.
Solution 2 – Restart SpotlightAnother step you can take is to restart the Spotlight feature manually. Since this is a built-in system process, you can only perform standard enable/disable procedure instead of standard switching off. And this is how to do it:
Select the Lock Screen tab.
In Background panel, switch from Windows Spotlight to a Picture or the Slideshow.
Log off and log in.
Navigate to Lock screen and enable Windows Spotlight again.
Expert tip:
Solution 3 – Clean the Spotlight’s download folderAdditionally, you can clean the content from the download folder where the Spotlight photos are stored. That resolved the issue for some users, so it’s worth a try.
This is how to find and delete image files from the folder:
Open the Lock Screen tab.
Under Background, switch from Windows Spotlight to a Picture or the Slideshow.
Now, navigate to: C:UsersUsernameAppDataLocalPackagesMicrosoft.Windows.ContentDeliveryManager_cw5n1h2txyewyLocalStateAssets
You’ll need to enable Hidden Folders in order to access the files.
In Assets folder, press Ctrl + A to select all files and delete them.
Enable the Spotlight again and log off.
The problem should be resolved. However, if it’s not, your best bet is our final solution.
READ ALSO: Fix Windows Spotlight not working with a customized slideshow
Solution 4 – Reset/Reassign the Spotlight serviceAs we already said, Spotlight is an integrated feature and can’t be reinstalled or disabled in the standard way. But, at least, it can be reassigned and thus restored to default settings.
This procedure has two parts that can be used as two distinctive workarounds. But we’ll unite them here. Now, these are not exactly the easiest steps to perform, so follow the instructions closely:
Open Lock screen tab and change the Background from Windows Spotlight to Slideshow or Picture.
Confirm with OK.
Press Windows key + R to open the Run command line.
Copy-paste the following command and press Enter: %USERPROFILE%/AppDataLocalPackagesMicrosoft.Windows.ContentDeliveryManager_cw5n1h2txyewySettings
Restart the PC.
Enable Windows Spotlight.
The second solution needs you to utilise Windows PowerShell in order to reset Spotlight. And this is how to do it.
Make sure that the Spotlight feature is enabled.
Under Windows Search bar, type Windows PowerShell.
In the command line, paste the following command:
Restart your computer.
This should restart Windows Spotlight and fix your issue.
-READ ALSO: Top 10 Windows 10 live wallpapers you need to try
It seems like Microsoft is aware of the problem and as some users reported, newer Windows 10 updates solved the issue without any additional steps. So make sure that you have the latest Windows 10 updates installed.
That should wrap it up. As you can see, there are some easy solutions, and some more complicated ones. Try them in the order above to see what works for you.
Was this page helpful?
x
Fix: Eudora Problems On Windows 10/11
FIX: Eudora problems on Windows 10/11
3
Share
X
If Eudora is your preferred email client, it’s very likely to experience problems when using it on Windows 10.
In this article, we’re guiding you through the necessary steps to restore Eudora’s functionality.
Don’t hesitate to take a look at our Web & Cloud section and be prepared to master your apps.
Since you’re here, visit our exhaustive collection of articles in the Software Hub.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
Email clients were popular in the past, but as the Internet develops, many users switched to webmail services since they are more practical.
Eudora used to be a popular email client for macOS and Windows alike. It was launched in 1988 and later acquired by Qualcomm in 1991.
The last commercial version of Eudora was released in 2006. Following several attempts to keep it alive, an open-source version of the client was abandoned in 2010.
Even though Eudora is now an outdated email client, some users don’t want to switch, and they continue using it on Windows 10.
Since the email client hasn’t been updated in years, some issues with Windows 10 are expected, and today we’re going to show you how to fix them.
How can I fix Eudora problems on Windows? 1. Install Eudora to the root directoryMost Windows applications will be installed by default in C:Program Files directory. But it doesn’t work for Eudora.
So if you want to avoid any problems with this email client, we suggest that you install Eudora on a root directory.
So during installation, be sure to change the directory from C:Program Files to C:Eudora and send the application there.
After doing that, most problems with it will be resolved.
2. Try an alternative email clientWe insist on switching to a more modern and reliable email client that’s compatible with your OS. You have a multitude of options, but we recommend you get an email client with integrated productivity features.
Modern email clients can help you open all your emails from all your providers in just one Window. They come with very good search options that help you find emails by using keywords.
Some of them include optical character recognition technologies that allow you to search for images as well. On top of that, you can create a good management system with filtering, tagging, and folders.
Up-to-date email clients will most likely give you fewer issues than Eudora. Not only will you be able to open and manage your emails, but upgraded software have greater security that protects against present-day threats.
3. Move Eudora files and change your registry
First, go to C:Program FilesQualcommEudora
Copy all files from this directory to the following location: C:UsersYour_userAppDataRoamingQualcommEudora
Expert tip:
Then, do the following:
After moving the Eudora files and changing the registry, check if the problem is resolved.
4. Make sure that your browser is set as defaultAfter making the necessary changes, you should be able to open links in Eudora without any problems.
If the issue still persists, you might have to manually copy and open the links as a workaround.
5. Uncheck the Use Microsoft viewer optionIf you have any problems with opening links in Eudora, you might want to try disabling the Use Microsoft viewer option.
To access this option, navigate to Settings / Viewing mail. Simply disable this option and the links will start working.
Then, enable the Use Microsoft viewer option again, and the issue should be resolved completely.
6. Don’t set Eudora as the default email clientUsers reported the following message on their Windows 10 PC after installing Office 365:
Eudora is unable to update the system registry
To fix this problem:
Eudora was a great email client in the 90s, and even though this program works on Windows 10, there are certain issues that can appear, but you can easily solve them by using one of our solutions.
If you don’t manage to solve the problem, you might want to consider switching to a different email client, as suggested in the beginning.
Was this page helpful?
x
Update the detailed information about Windows 11/10 Stuck On Please Wait Screen on the Cattuongwedding.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!