Trending February 2024 # Windows Update Pending Install? 4 Ways To Fix It # Suggested March 2024 # Top 4 Popular

You are reading the article Windows Update Pending Install? 4 Ways To Fix It updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Windows Update Pending Install? 4 Ways To Fix It

Windows Update Pending Install? 4 Ways to Fix It Everything you need to complete the installation of your updates




When you see the W

indows update pending install message

, the updates don’t install.

A solution to this issue is to run the Windows Update troubleshooter and restart your PC.

Another approach is to make system changes using a dedicated command-line app.



Repair all Windows Updates Errors with Fortect:

Windows update failures can be annoying! With Fortect, you will get rid of errors caused by missing or corrupted files after an update. The utility maintains a repository of the original Windows system file versions, and it uses a reverse algorithm to swap out the damaged ones for good ones.

Download Fortect and install it on your PC

Start the tool’s scanning process to look for corrupt files that are the source of the issues

Fortect has been downloaded by


readers this month.

Windows updates are automatically downloaded when available and are usually installed automatically. However, some users reported the downloaded updates’ status to be pending on install.

Below are some of the factors that can cause the pending install Windows Update issue:

Metered connection: Using a metered connection is one of the ways to stop automatic Windows updates. Hence, your updates will be pending until you allow them.

Issues with the update process: Sometimes, the status of your Windows update might read: pending install. This can happen if the process runs into some glitches. You can fix this quickly by running the Windows update troubleshooter.

Listed below are some troubleshooting steps you should try before moving to the sophisticated fixes in this section:

Restart the PC. Take immediate action in case of facing Windows not restarting issues.

Reboot your modem.

If you can’t install your updates after these preliminary fixes, you can move to the solutions below.

In some cases, your Windows update might be stuck on pending install, because of minor glitches. Running the built-in troubleshooter should clear this up.

2. Reset the required components

Sometimes, the Windows update pending install issue might be because the needed components run into problems. Running the commands above will help reset everything.

Some users reported that they were able to fix the issue by running only the first command. So, you can also check if you can install the update after running it.

Expert tip:

One of the ways to stop the automatic download and installation of updates is to set your internet as a metered connection. However, this can also be the reason for the Windows update pending install issue.

Hence, you should allow the update over your metered connection temporarily. Also, you can toggle the switch backwards and forward if you are not on a metered connection. This has fixed the issue for some users.

One of the things that cause the Windows update pending install issue is a faulty cache. You need to stop the Windows Update service and clear the cache before you can get past this issue.

After doing this, you can now try to download and install your updates again.

We have come to the end of this detailed guide. We hope that our solutions can help you with the Windows update pending install issue.

If Windows update is not showing for you, check this excellent guide to bring them back.

Was this page helpful?


You're reading Windows Update Pending Install? 4 Ways To Fix It

Why Is My Windows Explorer Slow? 14 Ways To Fix It

Windows File Explorer is a file management tool in Windows that offers a variety of operations on your files and folders. However, this convenient tool ceases to work sometimes, and you may run into a problem.

You may encounter various issues with Windows Explorer. For instance, it may freeze when you open any folder or act sluggish while using the copy-paste feature. Or, its search feature may take quite a long time to index the files. Moreover, switching between the folders can take ages with a slow Windows Explorer.

Whatever the scenarios are, you will be able to figure out a solution to this problem once you go through this post.

Working with your files and folders becomes irksome when Windows Explorer is laggy. So you need to solve this problem as soon as possible. It isn’t that head-scratching and time-consuming problem to fix.

Here, We have compiled a list of 14 fixes to help you solve the problem of slow Windows explorer. Let’s dive straight into them.

Restarting Windows Explorer is the first thing you can do when it is slow. Restarting will help fix any internal glitches within Windows Explorer that might be causing it to run slow. Also, if you have multiple file explorers open, it can cause lags. Follow these steps to restart Windows Explorer.

You may be running too many programs at once on your PC that consumes huge RAM and CPU. It is obvious for your computer to lag in such cases. It is meanwhile also responsible for lagging your Windows Explorer. You can close the unnecessary programs and see if it solves the issue. Here’s how:

Cortana is a voice-enabled AI assistant feature provided by Microsoft. In Windows 10, it is located in the taskbar beside the search box. While on Windows 11, you may not see it in the taskbar. You need to search Cortana in the Windows search box to load it.

Many users reported that the enabled Cortana feature was causing high CPU usage ultimately causing Windows Explorer to lag. You can disable it and see if it solves the problem. Here’s how to do it:

The Quick access section inside Windows explorer is a handy feature that lists all the files and folders you accessed recently or use frequently. Whenever you try opening Windows Explorer, Quick access will try to list all of them for your ease. If there are a bunch of them, it requires much time and may cause Explorer to lag. Follow these steps to disable the quick access feature:

You can apply this fix if you have a folder that comprises heaps of files and folders. The folder may be cluttered, and Windows explorer may take much time to open it. You can optimize the folder settings such that it opens fast. Here’s how to do it:

Note: You can apply this fix every time you experience an issue with a particular folder.

Windows Explorer provides many folder view types such as Large icons, Small icons, Details, and Tiles. You might have set the view type of the folder to display every detail like the Date modified and type. 

When there are a bunch of files within the folder, it may take a long time to load the details. Also, setting different view types to different folders can cause Explorer to lag. Follow these steps to reset the folder view type:

Sometimes, when you open a particular folder, it can stop responding. If you kill the task from the task manager, you will kill the entire File Explorer process.

If the File Explorer process is killed, the next time you open it, it will take more time than usual to open, and you may face a slow Explorer. You can launch the folder windows as a separate process and prevent it from happening.

Here’s how to do it:

The search and indexing feature is used to improve your search results. Whenever you try to search something in the search bar of File Explorer, it tries to locate the files and display them to you. But if there is a problem with search and indexing, it will take a lot of time to do it, and you may face the issue of slow Windows Explorer.

Windows has a search and indexing troubleshooter integrated in its troubleshooting tool to figure out this issue with search and indexing. Try running it and see if it solves the problem.

Your PC is scheduled to perform system maintenance on a regular basis using the built-in maintenance tool. It fixes any compatibility issues and errors on your PC. When Windows Explorer is slow, you can run manual system maintenance and see if it solves the problem. Here’s how:

Disk defragmenter is a built-in utility tool in Windows. It lets you rearrange the data stored on your hard disk so that they are stored in a contiguous space. Defragmenter consolidates the fragmented files over your hard drive and helps File Explorer find the data faster. 

Drives are defragmented on a scheduled basis. However, consider defragging the disk manually if you are facing a slow Windows Explorer. Here’s how:

Disk cleanup is another utility tool in Windows that helps you delete temporary files, cached files from the Internet, and thumbnails. These unnecessary files can slow down your computer and cause File explorer lags. Deleting them will help it load faster. Here’s how to run a disk cleanup on your computer:


Malware is spiteful programs used by attackers to invade and leak your privacy. They mostly enter your PC through the Internet. They are responsible for causing limitless harm to your PC, like file corruption or registry modification. They also run unwanted programs on your computer, making File Explorer unresponsive.

You can run a Quick Scan feature integrated into Windows Security and eliminate the malware from your device. Here’s how to do it:

DISM (Deployment Image Servicing and Management) and SFC (Scannow tool checks) for and fixes the corrupted files in your OS. DISM is specifically used to repair the Windows image.

Any faulty files will be replaced after using these commands. If they are the culprit behind making Windows Explorer slow, you will return it to the working state after running these commands.

DISM process is a bit slower as it requires file downloading from external sources. You should first run SFC and then run the DISM tool. If SFC fixes the issue, you don’t need to proceed with DISM. Else, you need it as well.

Follow these steps to run them:

Windows Event Viewer is a built-in administrative tool in Windows to monitor event logs and troubleshoot the issues according to respective logs. You can also figure out the issue behind your Windows Explorer running slow from the event viewer. Follow these steps:

Fix 0X800F8011 Windows Update Error

Microsoft ensures that features and fixes for bugs are rolled out to its users promptly via Windows Updates. However, these feature and system updates are often faced with several kinds of errors, one of which is the Error code 0x800f8011. This error is accompanied by the error message, “We couldn’t install this update, but you can try again,” and essentially restricts you from installing new updates. Today, we will see how you can fix the Windows update error 0x800f8011.

Fix Windows update error 0x800f8011

When you are facing the error 0x800f8011 while trying to install an update, it is sometimes a sign of certain files missing that are essential for the update process to go through. Alternatively, conflicting third-party antivirus software or out-of-date system drivers could also cause this issue. Let us now see what you can do to fix this problem.

Try installing the update manually

Temporarily disable the third-party antivirus

Run Windows Update troubleshooter

Reset Windows Update Components to default

1] Try installing the update manually

The solution most commonly prescribed is to look to install the update that you are facing an issue with manually. If there is something wrong with the Windows Update components or there is an absence of some system files that are a prerequisite, then manually installing the problematic update can help you bypass the problem.

Find out the KB number of the update that you are facing an issue with. (It is mentioned in parentheses at the end of the update’s name)

Visit the Microsoft Update Catalog website and paste the said KB number in the search bar here

This will show you updates corresponding to the KB number searched for.

Reboot your computer to finalize the installation of this update, and in this manner, you will not encounter “We couldn’t install this update, but you can try again” Error 0x800f8011.

2] Temporarily disable the third-party antivirus

If this issue turns out to be rooted in conflicting antivirus software, then disabling it should do the trick.

After disabling it, you should try installing the update again and checking if it is installing seamlessly.

3] Run Windows Update troubleshooter

Microsoft offers a troubleshooting utility for Windows that is for users to fix errors pertaining to Windows Updates, and it will be of help to fix error 0x800f8011.

Open Windows Settings and select the System tab

The Windows Update troubleshooter will scan through the system files and components, and fix if there is a detectable problem. Once the process has finished, try installing the update again.

4] Reset Windows Update Components to default

If the troubleshooter was of no help, then you can reset the Update components to their default configurations. If your Windows update constantly fails to install, then resetting the Update components is your best bet.

In order to initiate the process, you first have to stop the Windows Update services, and follow it by deleting qmgr*.dat files, resetting the BITS service, deleting incorrect Registry values, resetting Winsock, and bringing the Update services back. The complete process of how to reset Windows Update components is very comprehensive and requires you to be meticulous.

How do I fix Windows Update error 0x800f081f?

People often confuse the error in question with Update error 0x800F081F. This error is accompanied by the message “There were some problems installing the update” and can be fixed using the native DISM utility. The DISM tool helps detect inconsistencies within the system files and fix them as well as it.

How do I fix Windows 11 Update failed?

If you are facing issues where your Windows 11 update fails to install and it says so, it may be potentially because of both hardware and software issues. Lack of enough space for the update could cause a failure, so ensure that that’s not the case. Similarly, you should check for updated drivers, repair system files, or unplug conflicting external hardware.

Fix 0X8024401F Windows Update Error

If you’re encountering the Windows Update error code 0x8024401f when trying to install certain updates or while trying to update a UWP app via the Windows Store, then this post is intended to help you. In this post, we will identify the possible causes as well as provide the appropriate solutions you can try to remediate the issue.

You might encounter the error due to one or more (but not limited to) of the following known causes-

Corrupted Windows Store cache.

Interfering Proxy or VPN connection.

3rd party security software interference.

Damaged Windows Update components.

Fix Windows Update Error 0x8024401f

If you’re faced with this Windows update error 0x8024401f issue, you can try our recommended solutions in the order presented below to resolve the issue.

Disable 3rd party security software

Run Windows Update Troubleshooter

Reset the Windows Store cache & clear the Windows Update cache

Uninstall the VPN client or remove the Proxy server

Perform a Fresh Start, In-place upgrade repair or Cloud Reset

Let’s look at the description of the process involved in each of the listed solutions.

1] Disable/Uninstall 3rd party security software (if applicable)

Firewall and antivirus are important for your system safety, but sometimes these programs can interfere with Windows 10 and cause this Windows Update error 0x8024401f to appear.

McAfee, AVAST, and Comodo are all known to cause this particular issue. In this case, to fix this issue, you’ll have to remove all third-party antivirus programs from your PC using the dedicated removal tool to remove all files associated with your antivirus program.

If removing the antivirus fixes this error, you can now install the same antivirus again, or you can switch to an alternative software or better still stick to Windows 10 native AV program – Windows Defender.

2] Run Windows Update Troubleshooter

This solution requires you to run the inbuilt Windows Update Troubleshooter and see if that helps to resolve the error.

3] Reset the Windows Store cache & clear the Windows Update cache

This solution requires you clear the contents of the Software Distribution folder, as well as clear/reset the Microsoft Store cache and then retry the update process again. If the error is still unresolved, continue with the next solution.

4] Uninstall the VPN client or remove the Proxy server (if applicable)

A VPN client or a Proxy server could trigger this error due to some kind of interference that ends up blocking communications between your Windows 10 client machine and the Windows Update server. In this case, you can try uninstalling your VPN software via the Programs and Features applet in Windows 10 or remove any proxy server from your computer and see if that resolves the issue.

5] Perform a Fresh Start, In-place upgrade repair or Cloud Reset

At this point, if the Windows Update error 0x8024401f is still unresolved, it’s most likely due to some kind of system corruption that cannot be resolved conventionally. In this case, you can try Fresh Start, In-place upgrade repair to reset every Windows component. Also, if you’re running Windows 10 version 1909 and later, you can try Cloud Reset and see if that helps.

PS: Windows Update error 0x8024402f is another similar instance of this error.

Any of these solutions should work for you!

How To Fix Windows Update Error 0X80240022

How to Fix Windows Update Error 0x80240022 System misconfiguration may trigger this error.






Repair all Windows Updates Errors with Fortect:

Windows update failures can be annoying! With Fortect, you will get rid of errors caused by missing or corrupted files after an update. The utility maintains a repository of the original Windows system file versions, and it uses a reverse algorithm to swap out the damaged ones for good ones.

Download Fortect and install it on your PC

Start the tool’s scanning process to look for corrupt files that are the source of the issues

Fortect has been downloaded by


readers this month.

Many users report the error code 0x80240022 they encounter when updating Windows Defender on their PC. It means there’s a problem with the update process.

In addition, users can run into other errors like the Windows Defender error 0x80073b01 when starting the program.

Windows Update error 0x80240022 is an error associated with problems with the Windows Defender program. The error can occur in different instances, like when you open Windows Defender or when you try to check for updates for Windows Defender.

Furthermore, the error prevents users from updating the Windows Defender program, saying Windows defender could not download the update. It leaves the system vulnerable to attacks and can be caused by various factors.

Encountering the Windows Defender update error 0x80240022 on your computer can be due to many factors impeding the program’s processes. A prominent factor that causes the problem is missing corrupt system files. They can cause your programs to malfunction, resulting in errors when they are running.

Moreover, users are likely to encounter the error due to other factors such as:

Incorrect system settings – Users can run into Windows Defender problems when a contradicting system setting affects its activities. The settings can impede its ability to run smoothly and cause it to crash or run into errors.

Issues with the Registry files – Some registry files are responsible for running Windows Defender. So, the program can prompt the Windows update error 0x80244022 if the files are not intact.

These causes may differ in different devices. First, we’ll discuss solutions you can use to fix the error.

Disable other antivirus software running on your computer.

Restart Windows in Safe Mode and Check if the error persists.

Expert tip:

1. Perform a Clean Boot

A clean boot will prevent third-party apps from running from scratch, preventing interference and fixing startup problems.

2. Turn off Metered Connection

Turning off the Metered connection has been an effective solution for some users. It can fix network connection issues.

3. Run an SFC scan

Running a System File Checker scan will detect corrupt or damaged system files that can cause the Windows update 0x80240022 error.

Check our guide on fixing the run as administrator option if it’s not working on your PC.

If there are any updates available, Windows will search for and install them. Update Windows OS will fix bugs that can affect programs on your PC.

The error can occur due to certificate failure caused by incorrect time and date. So, resetting your time and date to the correct one can fix the error.

Alternatively, readers can check our article on how to fix Windows Defender missing on Windows 11 in a few steps. Also, you can check how to fix Windows Defender error 577 on Windows 10/11.

Still experiencing issues?

Was this page helpful?


Start a conversation

How To Fix Windows Update Error 0X80242024

Here is a guide to fix Windows Update error 0x80242024. Windows Update errors are not new as users keep running into one or another update error every now and then. One such error is the error code 0x80242024 that occurs while you install some feature or quality updates manually or automatically.

What is error code 0x80242024?

Windows Update error code 0x80242024 means that the state of the update after its post-reboot operation has completed is unexpected. You may see a message WU_E_UH_POSTREBOOTUNEXPECTEDSTATE in the error logs.

Users experiencing this error code might miss out on important updates like bug fixes and other improvements. It is anyway crucial to keep your system up-to-date to avoid potential security threats and get new features. Hence, it is essential to get rid of this error code and install new Windows updates successfully. If you are also facing the same error code and are unable to fix it up, this post is for you. In this guide, we are going to discuss some working methods that will help you resolve Windows Update error 0x80242024.

How to fix Windows Update Error 0x80242024

Here are the methods to fix Windows Update error code 0x80242024 on your Windows 11/10 computer:

Try some general troubleshooting methods.

Run Windows Update troubleshooter.

Run DISM and SFC scans.

Reset Windows Update components.

Disable third-party antivirus.

Disable Proxy connection.

Restart relevant Windows services.

Download and install updates manually.

Let us discuss the above methods in detail now!

1] Try some general troubleshooting methods

At first, you can try some general tricks to get rid of this error code. Here are some simple tips that you can try and that might resolve this issue:

Restart your PC and then try installing the update again.

Install Update in Clean Boot and see.

Make sure you are connected to a stable internet, else you will face errors while installing Windows updates. Try switching to a good speed internet and

If there is any connected USB drive or any other external device, try to unplug it.

Do check whether the date and time of your PC are correct. If not, you might receive this error code.

In case you tried the above suggestions and the error code still persists, you will need to try some other methods to fix it up.

2] Run Windows Update troubleshooter

See if this fixes up the issue for you. If not, there are some other reasons for the error that need to be taken care of. So, try some other fix from this guide.

3] Run DISM and SFC scans

Your PC might be dealing with some system file corruption or some important file required for installing updates might be missing from your system. In that case, you can run DISM and SFC scans to restore the good health of your PC and might resolve this issue.

First, try running the SFC scan and if that doesn’t help, execute the DISM scan command. Simply open the Command Prompt with administrator rights and then enter the below commands in CMD one by one:

sfc /scannow

After that, run the below DISM scan command:

dism /online /cleanup-image /restorehealth

The commands will take a while to be executed completed. When done, attempt to install the Windows update that was giving you the error code 0x80242024.

4] Reset Windows Update components

You can also try resetting Windows Update components to tackle this error code. It is effective in many cases when Windows Updates fail to Install and might fix this as well. You can manually reset Windows Update components to default with the help of the Reset Windows Update Components Tool.

5] Disable third-party antivirus

If you are using a third-party antivirus suite on your PC, try disabling it and then install the Windows update again. This is because there are chances that your antivirus might have misconstrued update files as potential threats and thus updates were failed with error code 0x80242024. So, temporarily disable the antivirus program and then check if the error is gone or not.

6] Disable Proxy Connection 7] Restart relevant Windows services

The Windows update might be failing with error code 0x80242024 in case the important Windows update services are not running. So, you can resolve the error code by restarting the relevant Windows services.

Simply launch the Command Prompt as an administrator and type the below commands in the given order, and then press the Enter button to execute them.

Net Stop bits Net Stop wuauserv Net Stop appidsvc Net Stop cryptsvc Ren %systemroot%SoftwareDistribution SoftwareDistribution.bak Ren %systemroot%system32catroot2 catroot2.bak Net Start bits Net Start wuauserv Net Start appidsvc Net Start cryptsvc

See if you are able to install Windows updates without the error code 0x80242024.

8] Download and install updates manually

If you are still unable to download and install Windows updates, try installing the updates manually. For that, you need to follow the below steps:

Firstly, open the Setting app by pressing the Windows +I hotkey.

After that, from the list, look for the update giving you the error code 0x80242024. You need to note down the KB number associated with this failed update.

Then, go to the Microsoft Update Catalog website and type the above KB number in the Search box, and press Enter.

If it is a Feature Update, you may use the Windows Update Assistant Tool.

How do I fix Windows Update 91% stuck?

If the Windows Update is slow or stuck at a certain percentage like 91%, you can try fixing it up by using some troubleshooting tips. Try deleting the Windows Update file cache, running Windows Update Troubleshooter, resetting Windows Update components, or running Windows Module Installer. There are some more fixes that you can try if these methods don’t work.

Hope this helps.

Update the detailed information about Windows Update Pending Install? 4 Ways To Fix It on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!